Partial renovation of Vares Elementary School in Vares, Bosnia based on the seal bid process.

THIS NOTICE IS PROVIDED FOR INFORMATION PURPOSES ONLY. THIS OPPORTUNITY IS AVAILABLE ONLY TO CONTRACTORS UNDER W912SR-09-B-4000.

This procurement will be acquired under FAR 6.302-2, Unusual and
Compelling Urgency in order to make the necessary repairs at Vares Elementary School in Vares, Bosnia. Also special note the correct SOLICITATION number is W91253-09-B-4001.

Draft Scope of Work and Draft ESTIMATED BILL OF MATERIALS AND QUANTITIES

DRAFT SOW

1. DESCRIPTION: Partial renovation of Vares Elementary School in Vares Bosnia and Herzegovina. The contractor shall replace all existing outer joinery of the school with new aluminium anodized joinery, repair all damaged areas of the school faade and paint it, remove all existing gutters and replace with new ones as well as replace all inner and outer window sills.

2. LOCATION: The school is located in Vares, Federation of BiH, Bosnia and Herzegovina.

3. ALUMINIUM JOINERY WORKS: The Contractor shall remove and dispose of all existing wooden joinery on the outer walls of the school. The Contractor shall provide and install new anodized aluminium joinery to replace the old removed wooden joinery, as well as provide and install inner and outer window sills.

4. FAADE WORKS: The Contractor shall brake off all damaged areas of the existing faade on the outer walls of the school building (approximately 40-45% of total faade area), repair the exposed areas with plaster and paint the whole faade.

5. TINSMITHERY WORKS: The Contractor shall dismantle and remove all existing gutters, as well as provide and install new replacement gutters, as well as all tin metal fascia in different areas of the school.

6. DURATION OF PROJECT: The entire project shall be completed within 50 calendar days from the date of contract award.

Draft ESTIMATED BILL OF MATERIALS AND QUANTITIES


NOTE: THE CONTRACTOR IS TO UNDERSTAND THAT ALL THE MATERIALS AND QUANTITIES LISTED IN THIS ATTACHMENT ARE ESTIMATES ONLY, AND THAT THEY DO NOT REFLECT THE ACTUAL QUANTITIES OR MATERIAL SPECIFICATIONS TO BE USED FOR THIS PROJECT.

1. ALUMINIUM JOINERY WORKS
The contractor shall dismantle all existing wooden joinery along with the internal and external window sills and properly dispose of it to a location outside of school yard, as arranged with the school repre-sentatives and local laws and regulations.
The contractor shall provide and install new anodized aluminium joinery made of aluminium profiles with a thermal break and thermo-insulated glass 4+12+4 mm, in accordance with Attachment 2 Technical Drawings.
The bottom sections of all windows shall have a ventus opening and shall be frosted glass sand type.
The price shall include delivery and installation of internal PVC window sills (white) as well as external zinc-plated metal sills.
The contractor shall repair all internal and external window edges around the newly installed windows, in order to bring it in the initial state.
All joinery shall be manufactured based on the measurements taken on the spot.

01 Four-wing window with two upper section wings
opening around vertical axis and two bottom section
wings opening around the horizontal axis
2400 x 2300 mm 102 EA
02 Four-wing window with two upper section wings
opening around vertical axis and two bottom section
wings opening around the horizontal axis
1600 x 2300 mm 16 EA
03 Single-wing window opening around both axis
900 x 900 mm 21 EA
04 Double-wing window with one wing opening around
both axis and the other is fixed wing
1600 x 900 mm 3 EA
05 Double-wing window with one wing opening around
both axis and the other is fixed wing
1600 x 1500 mm 1 EA
06 Entrance double door with fixed door jamb and transom
3500 x 3200 mm 1 EA
07 Window opening around the bottom horizontal axis
1300 x 500 mm 4 EA
08 Stairway glass wall with six window sections opening
around both horizontal and vertical axis
4000 x 9000 mm 2 EA
09 Glass wall with two window sections opening
around both horizontal and vertical axis
4000 x 2100 mm 2 EA
10 Slide window
1000 x 700 mm 1 EA
11 Single-wing window opening around vertical axis
600 x 500 mm 1 EA
12 Single-wing door without transom
1200 x 2200 mm 1 EA
13 Single-wing door without transom
900 x 2200 mm 2 EA
14 Double door
1500 x 3200 mm 1 EA
15 Glass wall with one window section opening
around both horizontal and vertical axis
1600 x 2300 mm 2 EA
16 Glass wall with one window section opening
around both horizontal and vertical axis
1600 x 3300 mm 3 EA
17 Glass wall with two window sections opening
around both horizontal and vertical axis
1600 x 5200 mm 1 EA

2. FAADE WORKS
01 Braking off of all damaged faade plaster, apply preparatory cement layer and then finally apply rough and fine plaster faade. Estimation of damaged faade plaster area is 40-45% of the total faade area.
880 m2
02 Impregnation of total faade area
1970 m2
03 Application of one layer of universal faade glue (type equal or similar to Baumit or Knauf) with wire mesh, as well as final preparation works for plastering works 1820 m2
04 Impregnation or application of preparatory coating for plastering works 1820 m2
05 Application of scrubbed acrylic faade color to be determined by the school repre-sentatives; equal or similar to type Jub or Baumit or Knauf 1820 m2
06 Construction of stone and concrete collar strip Soklo type around the school from bottom up to 60 cm in height type of stone and color to be determined by the school representatives
150 m2

3. TINSMITHERY WORKS
01 Procurement and installation of hanging zinc-plated 0.55 mm thickness gutters, to in-clude all required fittings, hooks and painting.
140 m
02 Procurement and installation of horizontal zinc-plated 0.55 mm thickness gutters, to include all required fittings, hooks and painting.
160 m
03 Procurement and installation of tin fascia made of zinc-plated metal sheets of d=0.55 mm at various location throughout the school building i.e. above main school en-trance, terrace, other entrances and garage, all in different sizes. The price shall in-clude dismantling and proper disposal of all existing tin metal fascia.
77 m