Pallet supports
Closed Solicitation Posted
- Solicitation number
- W519TC24Q2137
- Agency
- Joint Munitions Command Army Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 331110 Iron and Steel Mills and Ferroalloy Manufacturing
- PSC
- 9520 Structural Shapes
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks the production of 1,920 pallet supports, 640 spreaders, and 480 runners manufactured from hot-rolled steel per the specifications and drawings provided. The Department of the Army Materiel Command Joint Munitions Command requires the parts to support MK 8-0 pallets. Bids are due by January 29, 2024 and must include samples for approval, certificates of conformance signed by the vendor's quality assurance representative, and mill test reports to verify conformance with the standards. Production is scheduled to begin on July 1, 2024 contingent upon sample approval by April 25, 2024.
This requirement has been set aside for total small business. The NAICS code is 332999 and PSC code is 5140. Bids must be submitted via email to andrea.jones36.civ@army.mil and include attachment of bid documents. All contractors must have an active System for Award Management registration. Delivery of the approved parts is required to McAlester Army Ammunition Plant by April 25, 2024.
Notice text
2 versions
Update #2 · Latest ·
Awardee will be required to provide a sample of each, then, sample approval prior to delivery of remaining quantities. Estimated sample review start date 04/25/2024. Estimated production set to begin 7/01/2024.
SUPPORT FOR MK 8 PALLET, FFP
SUPPORT, PALLET, USED ON MK 8-0 PALLETS PER NAVSEA DRAWING No. 1279594 REVISION B, MANUFACTURED FROM ASTM A1011/A1011M, 1 GAGE HOT ROLLED STEEL, CS TYPE B. Support: 12 required per pallet
Certificates of conformance must be signed by the vendor’s Quality Assurance Representative.
Material certifications should list heat values proving the grade of material used.
Certificate of Conformance should state-
“This support conforms to the specifications listed in Drawing No. 1279594 Revision B.”
Metal Certificate must state-
“Material conforms to ASTM A1011 / A1011M HOT ROLLED STEEL SHEET, CS Type-B.”
SPREADER FOR MK 8 PALLET, FFP
SPREADER, PALLET, USED ON MK 8-0 PALLETS PER NAVSEA DRAWING No. 1279595 REVISION B, MANUFACTURED FROM ASTM A1011/A1011M, 11 GAGE HOT ROLLED STEEL, CS TYPE B. Spreader: 4 required per pallet .
Certificates of conformance must be signed by the vendor’s Quality Assurance Representative
Material certifications should list heat values proving the grade of material used.
Certificate of Conformance should state-
“This spreader conforms to the specifications listed in Drawing No. 1279595 Revision B.”
Metal Certificate must state-
“Material conforms to ASTM A1011 / A1011M HOT ROLLED STEEL SHEET, CS Type-B.”
RUNNER FOR MK 8 PALLET, FFP
RUNNER, PALLET, USED ON MK 8-0 PALLETS PER NAVSEA DRAWING No. 1279596 REVISION B, MANUFACTURED FROM ASTM A1011/A1011M, 11 GAGE HOT ROLLED STEEL, CS TYPE B. Runner: 3 required per pallet
Certificates of conformance must be signed by the vendor’s Quality Assurance Representative
Material certifications should list heat values proving the grade of material used.
Certificate of Conformance should state-
“This spreader conforms to the specifications listed in Drawing No. 1279596 Revision B.”
Metal Certificate must state-
“Material conforms to ASTM A1011 / A1011M HOT ROLLED STEEL SHEET, CS Type-B.”
ALL MATERIAL MUST HAVE MILL TEST REPORTS, MUST BE FREE OF PAINT, HAVE LIGHT TO NO RUST, BE TRANSPORTED COVERED, ALL DRAWING DIMENSIONAL TOLERANCES APPLY. CERTIFICATE OF CONFORMANCE REQUIRED TO ABOVE SPECIFICATIONS. SEE ATTACHED DRAWING FOR EACH, MUST PROVIDE SPEC SHEET AT THE TIME OF QUOTE.
BIDS SUBMISSIONS ONLY VIA EMAIL: andrea.jones36.civ@army.mil
[ATTACH BID DOCUMENTS, SUBMIT TO LISTED EMAIL]
Any changes to the solicitation shall also be posted to this web site and it is the contractor's responsibility to check site daily for any posted changes. All contractors who provide goods/services to the DOD must have a current active registration at System for Award Management (SAM) - https://www.sam.gov.
Update #1 ·
SAMPLE OF EACH WILL BE REQUIRED. Sample approval prior to delivery of remaining quantities. Estimated sample review start date 04/25/2024. Estimated production set to begin 7/01/2024.
SUPPORT FOR MK 8 PALLET, FFP
SUPPORT, PALLET, USED ON MK 8-0 PALLETS PER NAVSEA DRAWING No. 1279594 REVISION B, MANUFACTURED FROM ASTM A1011/A1011M, 1 GAGE HOT ROLLED STEEL, CS TYPE B. Support: 12 required per pallet
Certificates of conformance must be signed by the vendor’s Quality Assurance Representative.
Material certifications should list heat values proving the grade of material used.
Certificate of Conformance should state-
“This support conforms to the specifications listed in Drawing No. 1279594 Revision B.”
Metal Certificate must state-
“Material conforms to ASTM A1011 / A1011M HOT ROLLED STEEL SHEET, CS Type-B.”
SPREADER FOR MK 8 PALLET, FFP
SPREADER, PALLET, USED ON MK 8-0 PALLETS PER NAVSEA DRAWING No. 1279595 REVISION B, MANUFACTURED FROM ASTM A1011/A1011M, 11 GAGE HOT ROLLED STEEL, CS TYPE B. Spreader: 4 required per pallet .
Certificates of conformance must be signed by the vendor’s Quality Assurance Representative
Material certifications should list heat values proving the grade of material used.
Certificate of Conformance should state-
“This spreader conforms to the specifications listed in Drawing No. 1279595 Revision B.”
Metal Certificate must state-
“Material conforms to ASTM A1011 / A1011M HOT ROLLED STEEL SHEET, CS Type-B.”
RUNNER FOR MK 8 PALLET, FFP
RUNNER, PALLET, USED ON MK 8-0 PALLETS PER NAVSEA DRAWING No. 1279596 REVISION B, MANUFACTURED FROM ASTM A1011/A1011M, 11 GAGE HOT ROLLED STEEL, CS TYPE B. Runner: 3 required per pallet
Certificates of conformance must be signed by the vendor’s Quality Assurance Representative
Material certifications should list heat values proving the grade of material used.
Certificate of Conformance should state-
“This spreader conforms to the specifications listed in Drawing No. 1279596 Revision B.”
Metal Certificate must state-
“Material conforms to ASTM A1011 / A1011M HOT ROLLED STEEL SHEET, CS Type-B.”
ALL MATERIAL MUST HAVE MILL TEST REPORTS, MUST BE FREE OF PAINT, HAVE LIGHT TO NO RUST, BE TRANSPORTED COVERED, ALL DRAWING DIMENSIONAL TOLERANCES APPLY. CERTIFICATE OF CONFORMANCE REQUIRED TO ABOVE SPECIFICATIONS. SEE ATTACHED DRAWING FOR EACH, MUST PROVIDE SPEC SHEET AT THE TIME OF QUOTE.
BIDS SUBMISSIONS ONLY VIA EMAIL: andrea.jones36.civ@army.mil
[ATTACH BID DOCUMENTS, SUBMIT TO LISTED EMAIL]
Any changes to the solicitation shall also be posted to this web site and it is the contractor's responsibility to check site daily for any posted changes. All contractors who provide goods/services to the DOD must have a current active registration at System for Award Management (SAM) - https://www.sam.gov.
Attachments
| File | Type | Posted |
|---|---|---|
| B08_W519TC24Q2137 0001.pdf | ||
| B08_W519TC24Q2137.pdf | ||
| A03_1279595B - Spreader.pdf | ||
| A03_1279594B - Support.pdf | ||
| A03_1279596B - Runner.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity