Packing and Gasket Materials

This solicitation will result in a 100% Small Business Set-Aside for a Four (4) Year IDIQ contract. The guaranteed minimum quantity is 9,992 each. Estimated requirement for four years is Year One-9,992 each, Year Two-20,858 each, Year Three-8,162 each, and Year Four-13,004 each. The maximum over the life of the contract is 100,000 each.
DESC: NSN: 5330-01-528-4215, PART NUMBER 11581579, Sealing Strip, End is used on the M776 155 mm Cannon , and is machined from PTFE resin molded sheet per ASTM D3294 Type IV, or PTFE resin skived tape per ASTM D 3308 Type IV. The part is 1.890 inch X 2.126 inch X 0.60 inch thick with three (3) 0.0217 inch diameter holes.
Estimated issue date is 01 Apr 2009. This solicitation will be issued electronically in accordance with FAR 4.502 and 5.102, therefore, hardcopies will not be provided. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the internet: https://aais.ria.army.mil/aais/SOLINFO/index.htm
CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render your bid or proposal nonresponsive and result in the rejection of same.
.

This solicitation will result in a 100% Small Business Set-Aside for a Four (4) Year IDIQ contract. The guaranteed minimum quantity is 9,992 each. Estimated requirement for four years is Year One-9,992 each, Year Two-20,858 each, Year Three-8,162 each, and Year Four-13,004 each. The maximum over the life of the contract is 100,000 each.

DESC: NSN: 5330-01-528-4215, PART NUMBER 11581579, Sealing Strip, End is used on the M776 155 mm Cannon , and is machined from PTFE resin molded sheet per ASTM D3294 Type IV, or PTFE resin skived tape per ASTM D 3308 Type IV. The part is 1.890 inch X 2.126 inch X 0.60 inch thick with three (3) 0.0217 inch diameter holes.

Estimated issue date is 01 Apr 2009. This solicitation will be issued electronically in accordance with FAR 4.502 and 5.102, therefore, hardcopies will not be provided. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the internet: https://aais.ria.army.mil/aais/SOLINFO/index.htm

CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render your bid or proposal nonresponsive and result in the rejection of same.