Overhaul of T700-GE-401C Engine, Modules and Components

Revision 2 -
1. Updated SF1449 to reflect new closing date of 15 April 2010 10:00AM EDT.
2. FOB is Desitination.
3. Question. Can overhauled parts from other DOD sources be used for USCG overhauls? A. No. CG will not accept overhaul parts from any other sources (Navy, Army, DOD, etc.) other than the OEM or CG approved sources.

NOTICE FOR FILING AGENCY PROTESTS
United States Coast Guard Ombudsman Program

It is the policy of the United States Coast Guard (USCG) to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the General Accountability Office (GAO).

Interested parties are encouraged to seek resolution of their concerns within the USCG as an Alternative Dispute Resolution (ADR) forum, rather than filing a protest with the GAO or some external form. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the contracting officer or Ombudsman.

Informal forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the cognizant contracting officer. If the contracting officer is unable to satisfy the concerns, the interested party is encouraged to contact the USCG Ombudsman for Agency Protests. Under this informal process, the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, contracting officer, and solicitation closing date (if applicable).

Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the contracting officer through open and frank discussions. If the protester's concerns are unresolved, an independent review is available by the Ombudsman. The protester may file a formal agency protest to either the contracting officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency's goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth at FAR 33.103. If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. This will not preclude re-filing of the protest to meet the requirement. To be timely, protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted to:

Department of Homeland Security
United States Coast Guard (CG-9131)
Ombudsman Program for Agency Protests
1900 Half Street, SW, Room 11-0602
Washington D.C. 20593-0001
Telephone 202-372-3695
Fax: 202-475-3904

This is a combined synopsis/solicitation for the overhaul of commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; firm-fixed-price proposals are being requested. This requirement will be satisfied using commercial acquisition procedures specified in FAR Parts 12 and 15. This Request for Proposal (RFP) HSCG38-10-R-J00006 incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-38. The applicable North American Industry Classification Standard Code is 336412. The small business size standard is 1000 employees. This is an unrestricted solicitation. The USCG anticipates award of a firm fixed price requirements contract to a responsible contractor that can provide the overhaul capabilities. Drawings and specifications are not available and cannot be furnished by the Government

Provide pricing and delivery for the overhaul of the following items.
Estimated quantities are identified in the Schedule of Supplies below.

SCHEDULE OF INDEFINITE DELIVERY REQUIREMENTS
MATERIAL OVERHAUL

CONTRACT LINE ITEMS - BASE YEAR
DATE OF AWARD THROUGH ONE YEAR FROM DATE OF AWARD

CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE

0001 NSN 2840 01 318 5538 4 EA _____ _____
P/N 6064T25G01
T700 ENGINE
0002 UNUSUAL DAMAGE EVAL EA _____ _____
0003 SCRAP EA _____ _____

0004 NSN 2840 01 317 6673 19 EA _____ _____
P/N 6064T26G01
COLD SECTION MODULE
0005 UNUSUAL DAMAGE EVAL EA _____ _____
0006 SCRAP EA _____ _____

0007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 35 EA _____ _____
P/N 6900T93G02 or P/N 6900T93G01
COMP,AXIAL
0008 UNUSUAL DAMAGE EVAL EA _____ _____
0009 SCRAP EA _____ _____

0010 NSN 2840 01 316 9791 30 EA _____ _____
P/N 6064T27G01
POWER TURBINE MODULE
0011 UNUSUAL DAMAGE EVAL EA _____ _____
0012 SCRAP EA _____ _____

0013 NSN 2840 01 305 6951 6 EA _____ _____
P/N 6071T04G02
STAGE 1, TURBINE NOZZLE
0014 UNUSUAL DAMAGE EVAL EA _____ _____
0015 SCRAP EA _____ _____

0016 NSN 2840 01 439 1684, 3 EA _____ _____
P/N 6058T13G12
STAGE 3, NOZZLE,DUCT and AIRSEAL
0017 UNUSUAL DAMAGE EVAL EA _____ _____
0018 SCRAP EA _____ _____

0019 NSN 2840 01 366 0532 4 EA _____ _____
P/N 6071T55G05
DIFFUSER MIDFRAME, CASE (3),GAS TURBINE
0020 UNUSUAL DAMAGE EVAL EA _____ _____
0021 SCRAP EA _____ _____

0020 NSN 2840 01 304 4302 20 EA _____ _____
P/N 6064T54G08
COMBUSTION CHAMBER
0023 UNUSUAL DAMAGE EVAL EA _____ _____
0024 SCRAP EA _____ _____

0025 NSN 4320 01 295 1989 3 EA _____ _____
P/N 5034T11P05
LUBE PUMP
0026 UNUSUAL DAMAGE EVAL EA _____ _____
0027 SCRAP EA _____ _____

0028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____
P/N 6043T35G01 Modify to P/N 5125T92G01
POWER TURBINE SHAFT
0029 UNUSUAL DAMAGE EVAL EA _____ _____
0030 SCRAP EA _____ _____

0031 NSN 2840 01 473 3556, 4 EA _____ _____
P/N 5125T92G01
POWER TURBINE SHAFT
0032 UNUSUAL DAMAGE EVAL EA _____ _____
0033 SCRAP EA _____ _____

0034 NSN 2840 01 143 9991 1 EA _____ _____
P/N 6053T29G01
SWIRL FRAME
0035 UNUSUAL DAMAGE EVAL EA _____ _____
0036 SCRAP EA _____ _____


0037 NSN 2840 01 301 8172 1 EA _____ _____
P/N 6039T56G05
SHAFT ASSY, A-SUMP
0038 UNUSUAL DAMAGE EVAL EA _____ _____
0039 SCRAP EA _____ _____

0040 NSN 2840 01 314 8595 5 EA _____ _____
P/N 5074T79G10
HMU, FUEL CONTROL
0041 UNUSUAL DAMAGE EVAL EA _____ _____
0042 SCRAP EA _____ _____

0043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____
P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37
HMU, FUEL CONTROL
0044 UNUSUAL DAMAGE EVAL EA _____ _____
0045 SCRAP EA _____ _____

0046 NSN 2915 01 492 3907 10 EA _____ _____
P/N 4046T52G37
HMU FUEL CONTROL
0047 UNUSUAL DAMAGE EVAL EA _____ _____
0048 SCRAP EA _____ _____

0049 NSN 2915 01 304 4299 10 EA _____ _____
P/N 4045T30G07
INJECTOR ASSY
0050 UNUSUAL DAMAGE EVAL EA _____ _____
0051 SCRAP EA _____ _____

0052 NSN 2840 01 287 1316 5 EA _____ _____
P/N 6039T19G07
GEARBOX, ACCESSORY
0053 UNUSUAL DAMAGE EVAL EA _____ _____
0054 SCRAP EA _____ _____

0055 NSN 2995 01 313 0691 5 EA _____ _____
P/N 4046T28G15
VALVE ASSY, ANTI-ICE
0056 UNUSUAL DAMAGE EVAL EA _____ _____
0057 SCRAP EA _____ _____

0058 NSN 2995 01 294 9867 12 EA _____ _____
P/N 4046T28G14
VALVE ASSEMBLY,ANTI
0059 UNUSUAL DAMAGE EVAL EA _____ _____
0060 SCRAP EA _____ _____




0061 NSN 2995 01 309 1391 10 EA _____ _____
P/N 4046T28G16
VALVE ASSY, ANTI-ICE
0062 UNUSUAL DAMAGE EVAL EA _____ _____
0063 SCRAP EA _____ _____

0064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____
P/N 3033T33G02 Modify to P/N 3033T33G03
FUEL BOOST PUMP
0065 UNUSUAL DAMAGE EVAL EA _____ _____
0066 SCRAP EA _____ _____

0067 NSN 2915 01 HS1 9178 35 EA _____ _____
P/N 3033T33G03
FUEL BOOST PUMP
0068 UNUSUAL DAMAGE EVAL EA _____ _____
0069 SCRAP EA _____ _____

0070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____
P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
0071 UNUSUAL DAMAGE EVAL EA _____ _____
0072 SCRAP EA _____ _____

0073 NSN 2995 01 460 1334 25 EA _____ _____
P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
0074 UNUSUAL DAMAGE EVAL EA _____ _____
0075 SCRAP EA _____ _____

0076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____
P/N 6071T19G02 Modify to P/N 6071T19G01
ACFT SEALS, CDP SEALS
0077 UNUSUAL DAMAGE EVAL EA _____ _____
0078 SCRAP EA _____ _____

0079 NSN 2840 01 HS1 4501 5 EA _____ _____
P/N 6071T19G01
ACFT SEALS, CDP SEALS
0080 UNUSUAL DAMAGE EVAL EA _____ _____
0081 SCRAP EA _____ _____

0082 NSN 2915 01 462 3670 1 EA _____ _____
P/N 3046T17G02
OVERSPEED DRAIN VALVE
0083 UNUSUAL DAMAGE EVAL EA _____ _____
0084 SCRAP EA _____ _____



0085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____
Modify to NSN 2840 01 476 1840
P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14
Modify to P/N 6082T04G16
MATCHED ASSY/GG ROTOR
0086 UNUSUAL DAMAGE EVAL EA _____ _____
0087 SCRAP EA _____ _____

0088 NSN 2840 01 476 1840 25 EA _____ _____
P/N 6082T04G16
MATCHED ASSY/GG ROTOR
0089 UNUSUAL DAMAGE EVAL EA _____ _____
0090 SCRAP EA _____ _____

0091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01
STG. 3 NOZZLE DUCT & AIR SEAL
0092 UNUSUAL DAMAGE EVAL EA _____ _____
0093 SCRAP EA _____ _____

0094 NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted
STG. 3 NOZZLE DUCT and AIR SEAL
0095 UNUSUAL DAMAGE EVAL EA _____ _____
0096 SCRAP EA _____ _____

0097 NSN 2915 01 HS1 3688 3 EA _____ _____
P/N 6044T78G04
OVERSPEED DRAIN VALVE
0098 UNUSUAL DAMAGE EVAL EA _____ _____
0099 SCRAP EA _____ _____

0100 HOURLY RATE EA _____ _____

CONTRACT LINE ITEMS - OPTION PERIOD ONE
ONE YEAR PERIOD FOLLOWING THE BASE YEAR
CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE

1001 NSN 2840 01 318 5538 4 EA _____ _____
P/N 6064T25G01
T700 ENGINE
1002 UNUSUAL DAMAGE EVAL EA _____ _____
1003 SCRAP EA _____ _____

1004 NSN 2840 01 317 6673 19 EA _____ _____
P/N 6064T26G01
COLD SECTION MODULE
1005 UNUSUAL DAMAGE EVAL EA _____ _____
1006 SCRAP EA _____ _____

1007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 20 EA _____ _____
P/N 6900T93G02 or P/N 6900T93G01
COMP,AXIAL
1008 UNUSUAL DAMAGE EVAL EA _____ _____
1009 SCRAP EA _____ _____

1010 NSN 2840 01 316 9791 20 EA _____ _____
P/N 6064T27G01
POWER TURBINE MODULE
1011 UNUSUAL DAMAGE EVAL EA _____ _____
1012 SCRAP EA _____ _____

1013 NSN 2840 01 305 6951 6 EA _____ _____
P/N 6071T04G02
STAGE 1, TURBINE NOZZLE
1014 UNUSUAL DAMAGE EVAL EA _____ _____
1015 SCRAP EA _____ _____

1016 NSN 2840 01 439 1684, 3 EA _____ _____
P/N 6058T13G12
STAGE 3, NOZZLE,DUCT and AIRSEAL
1017 UNUSUAL DAMAGE EVAL EA _____ _____
1018 SCRAP EA _____ _____

1019 NSN 2840 01 366 0532 4 EA _____ _____
P/N 6071T55G05
DIFFUSER MIDFRAME, CASE (3),GAS TURBINE
1020 UNUSUAL DAMAGE EVAL EA _____ _____
1021 SCRAP EA _____ _____

1020 NSN 2840 01 304 4302 20 EA _____ _____
P/N 6064T54G08
COMBUSTION CHAMBER
1023 UNUSUAL DAMAGE EVAL EA _____ _____
1024 SCRAP EA _____ _____

1025 NSN 4320 01 295 1989 3 EA _____ _____
P/N 5034T11P05
LUBE PUMP
1026 UNUSUAL DAMAGE EVAL EA _____ _____
1027 SCRAP EA _____ _____

1028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____
P/N 6043T35G01 Modify to P/N 5125T92G01
POWER TURBINE SHAFT
1029 UNUSUAL DAMAGE EVAL EA _____ _____
1030 SCRAP EA _____ _____


1031 NSN 2840 01 473 3556, 4 EA _____ _____
P/N 5125T92G01
POWER TURBINE SHAFT
1032 UNUSUAL DAMAGE EVAL EA _____ _____
1033 SCRAP EA _____ _____

1034 NSN 2840 01 143 9991 1 EA _____ _____
P/N 6053T29G01
SWIRL FRAME
1035 UNUSUAL DAMAGE EVAL EA _____ _____
1036 SCRAP EA _____ _____

1037 NSN 2840 01 301 8172 1 EA _____ _____
P/N 6039T56G05
SHAFT ASSY, A-SUMP
1038 UNUSUAL DAMAGE EVAL EA _____ _____
1039 SCRAP EA _____ _____

1040 NSN 2840 01 314 8595 5 EA _____ _____
P/N 5074T79G10
HMU, FUEL CONTROL
1041 UNUSUAL DAMAGE EVAL EA _____ _____
1042 SCRAP EA _____ _____

1043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____
P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37
HMU, FUEL CONTROL
1044 UNUSUAL DAMAGE EVAL EA _____ _____
1045 SCRAP EA _____ _____

1046 NSN 2915 01 492 3907 10 EA _____ _____
P/N 4046T52G37
HMU FUEL CONTROL
1047 UNUSUAL DAMAGE EVAL EA _____ _____
1048 SCRAP EA _____ _____

1049 NSN 2915 01 304 4299 10 EA _____ _____
P/N 4045T30G07
INJECTOR ASSY
1050 UNUSUAL DAMAGE EVAL EA _____ _____
1051 SCRAP EA _____ _____

1052 NSN 2840 01 287 1316 5 EA _____ _____
P/N 6039T19G07
GEARBOX, ACCESSORY
1053 UNUSUAL DAMAGE EVAL EA _____ _____
1054 SCRAP EA _____ _____




1055 NSN 2995 01 313 0691 5 EA _____ _____
P/N 4046T28G15
VALVE ASSY, ANTI-ICE
1056 UNUSUAL DAMAGE EVAL EA _____ _____
1057 SCRAP EA _____ _____

1058 NSN 2995 01 294 9867 12 EA _____ _____
P/N 4046T28G14
VALVE ASSEMBLY,ANTI
1059 UNUSUAL DAMAGE EVAL EA _____ _____
1060 SCRAP EA _____ _____

1061 NSN 2995 01 309 1391 10 EA _____ _____
P/N 4046T28G16
VALVE ASSY, ANTI-ICE
1062 UNUSUAL DAMAGE EVAL EA _____ _____
1063 SCRAP EA _____ _____

1064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____
P/N 3033T33G02 Modify to P/N 3033T33G03
FUEL BOOST PUMP
1065 UNUSUAL DAMAGE EVAL EA _____ _____
1066 SCRAP EA _____ _____

1067 NSN 2915 01 HS1 9178 35 EA _____ _____
P/N 3033T33G03
FUEL BOOST PUMP
1068 UNUSUAL DAMAGE EVAL EA _____ _____
1069 SCRAP EA _____ _____

1070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____
P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
1071 UNUSUAL DAMAGE EVAL EA _____ _____
1072 SCRAP EA _____ _____

1073 NSN 2995 01 460 1334 25 EA _____ _____
P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
1074 UNUSUAL DAMAGE EVAL EA _____ _____
1075 SCRAP EA _____ _____

1076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____
P/N 6071T19G02 Modify to P/N 6071T19G01
ACFT SEALS, CDP SEALS
1077 UNUSUAL DAMAGE EVAL EA _____ _____
1078 SCRAP EA _____ _____



1079 NSN 2840 01 HS1 4501 5 EA _____ _____
P/N 6071T19G01
ACFT SEALS, CDP SEALS
1080 UNUSUAL DAMAGE EVAL EA _____ _____
1081 SCRAP EA _____ _____

1082 NSN 2915 01 462 3670 1 EA _____ _____
P/N 3046T17G02
OVERSPEED DRAIN VALVE
1083 UNUSUAL DAMAGE EVAL EA _____ _____
1084 SCRAP EA _____ _____

1085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____
Modify to NSN 2840 01 476 1840
P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14
Modify to P/N 6082T04G16
MATCHED ASSY/GG ROTOR
1086 UNUSUAL DAMAGE EVAL EA _____ _____
1087 SCRAP EA _____ _____

1088 NSN 2840 01 476 1840 15 EA _____ _____
P/N 6082T04G16
MATCHED ASSY/GG ROTOR
1089 UNUSUAL DAMAGE EVAL EA _____ _____
1090 SCRAP EA _____ _____

1091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01
STG. 3 NOZZLE DUCT & AIR SEAL
1092 UNUSUAL DAMAGE EVAL EA _____ _____
1093 SCRAP EA _____ _____

1094 NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted
STG. 3 NOZZLE DUCT and AIR SEAL
1095 UNUSUAL DAMAGE EVAL EA _____ _____
1096 SCRAP EA _____ _____

1097 NSN 2915 01 HS1 3688 3 EA _____ _____
P/N 6044T78G04
OVERSPEED DRAIN VALVE
1098 UNUSUAL DAMAGE EVAL EA _____ _____
1099 SCRAP EA _____ _____

1100 HOURLY RATE EA _____ _____

CONTRACT LINE ITEMS - OPTION PERIOD TWO
ONE YEAR PERIOD FOLLOWING OPTION PERIOD ONE
CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE

2001 NSN 2840 01 318 5538 4 EA _____ _____
P/N 6064T25G01
T700 ENGINE
2002 UNUSUAL DAMAGE EVAL EA _____ _____
2003 SCRAP EA _____ _____

2004 NSN 2840 01 317 6673 19 EA _____ _____
P/N 6064T26G01
COLD SECTION MODULE
2005 UNUSUAL DAMAGE EVAL EA _____ _____
2006 SCRAP EA _____ _____

2007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 20 EA _____ _____
P/N 6900T93G02 or P/N 6900T93G01
COMP,AXIAL
2008 UNUSUAL DAMAGE EVAL EA _____ _____
2009 SCRAP EA _____ _____

2010 NSN 2840 01 316 9791 20 EA _____ _____
P/N 6064T27G01
POWER TURBINE MODULE
2011 UNUSUAL DAMAGE EVAL EA _____ _____
2012 SCRAP EA _____ _____

2013 NSN 2840 01 305 6951 6 EA _____ _____
P/N 6071T04G02
STAGE 1, TURBINE NOZZLE
2014 UNUSUAL DAMAGE EVAL EA _____ _____
2015 SCRAP EA _____ _____

2016 NSN 2840 01 439 1684, 3 EA _____ _____
P/N 6058T13G12
STAGE 3, NOZZLE,DUCT and AIRSEAL
2017 UNUSUAL DAMAGE EVAL EA _____ _____
2018 SCRAP EA _____ _____

2019 NSN 2840 01 366 0532 4 EA _____ _____
P/N 6071T55G05
DIFFUSER MIDFRAME, CASE (3),GAS TURBINE
2020 UNUSUAL DAMAGE EVAL EA _____ _____
2021 SCRAP EA _____ _____




2020 NSN 2840 01 304 4302 20 EA _____ _____
P/N 6064T54G08
COMBUSTION CHAMBER
2023 UNUSUAL DAMAGE EVAL EA _____ _____
2024 SCRAP EA _____ _____

2025 NSN 4320 01 295 1989 3 EA _____ _____
P/N 5034T11P05
LUBE PUMP
2026 UNUSUAL DAMAGE EVAL EA _____ _____
2027 SCRAP EA _____ _____

2028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____
P/N 6043T35G01 Modify to P/N 5125T92G01
POWER TURBINE SHAFT
2029 UNUSUAL DAMAGE EVAL EA _____ _____
2030 SCRAP EA _____ _____

2031 NSN 2840 01 473 3556, 4 EA _____ _____
P/N 5125T92G01
POWER TURBINE SHAFT
2032 UNUSUAL DAMAGE EVAL EA _____ _____
2033 SCRAP EA _____ _____

2034 NSN 2840 01 143 9991 1 EA _____ _____
P/N 6053T29G01
SWIRL FRAME
2035 UNUSUAL DAMAGE EVAL EA _____ _____
2036 SCRAP EA _____ _____

2037 NSN 2840 01 301 8172 1 EA _____ _____
P/N 6039T56G05
SHAFT ASSY, A-SUMP
2038 UNUSUAL DAMAGE EVAL EA _____ _____
2039 SCRAP EA _____ _____

2040 NSN 2840 01 314 8595 5 EA _____ _____
P/N 5074T79G10
HMU, FUEL CONTROL
2041 UNUSUAL DAMAGE EVAL EA _____ _____
2042 SCRAP EA _____ _____

2043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____
P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37
HMU, FUEL CONTROL
2044 UNUSUAL DAMAGE EVAL EA _____ _____
2045 SCRAP EA _____ _____




2046 NSN 2915 01 492 3907 10 EA _____ _____
P/N 4046T52G37
HMU FUEL CONTROL
2047 UNUSUAL DAMAGE EVAL EA _____ _____
2048 SCRAP EA _____ _____

2049 NSN 2915 01 304 4299 10 EA _____ _____
P/N 4045T30G07
INJECTOR ASSY
2050 UNUSUAL DAMAGE EVAL EA _____ _____
2051 SCRAP EA _____ _____

2052 NSN 2840 01 287 1316 5 EA _____ _____
P/N 6039T19G07
GEARBOX, ACCESSORY
2053 UNUSUAL DAMAGE EVAL EA _____ _____
2054 SCRAP EA _____ _____

2055 NSN 2995 01 313 0691 5 EA _____ _____
P/N 4046T28G15
VALVE ASSY, ANTI-ICE
2056 UNUSUAL DAMAGE EVAL EA _____ _____
2057 SCRAP EA _____ _____

2058 NSN 2995 01 294 9867 12 EA _____ _____
P/N 4046T28G14
VALVE ASSEMBLY,ANTI
2059 UNUSUAL DAMAGE EVAL EA _____ _____
2060 SCRAP EA _____ _____

2061 NSN 2995 01 309 1391 10 EA _____ _____
P/N 4046T28G16
VALVE ASSY, ANTI-ICE
2062 UNUSUAL DAMAGE EVAL EA _____ _____
2063 SCRAP EA _____ _____

2064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____
P/N 3033T33G02 Modify to P/N 3033T33G03
FUEL BOOST PUMP
2065 UNUSUAL DAMAGE EVAL EA _____ _____
2066 SCRAP EA _____ _____

2067 NSN 2915 01 HS1 9178 35 EA _____ _____
P/N 3033T33G03
FUEL BOOST PUMP
2068 UNUSUAL DAMAGE EVAL EA _____ _____
2069 SCRAP EA _____ _____



2070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____
P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
2071 UNUSUAL DAMAGE EVAL EA _____ _____
2072 SCRAP EA _____ _____

2073 NSN 2995 01 460 1334 25 EA _____ _____
P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
2074 UNUSUAL DAMAGE EVAL EA _____ _____
2075 SCRAP EA _____ _____

2076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____
P/N 6071T19G02 Modify to P/N 6071T19G01
ACFT SEALS, CDP SEALS
2077 UNUSUAL DAMAGE EVAL EA _____ _____
2078 SCRAP EA _____ _____

2079 NSN 2840 01 HS1 4501 5 EA _____ _____
P/N 6071T19G01
ACFT SEALS, CDP SEALS
2080 UNUSUAL DAMAGE EVAL EA _____ _____
2081 SCRAP EA _____ _____

2082 NSN 2915 01 462 3670 1 EA _____ _____
P/N 3046T17G02
OVERSPEED DRAIN VALVE
2083 UNUSUAL DAMAGE EVAL EA _____ _____
2084 SCRAP EA _____ _____

2085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____
Modify to NSN 2840 01 476 1840
P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14
Modify to P/N 6082T04G16
MATCHED ASSY/GG ROTOR
2086 UNUSUAL DAMAGE EVAL EA _____ _____
2087 SCRAP EA _____ _____

2088 NSN 2840 01 476 1840 18 EA _____ _____
P/N 6082T04G16
MATCHED ASSY/GG ROTOR
2089 UNUSUAL DAMAGE EVAL EA _____ _____
2090 SCRAP EA _____ _____

2091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01
STG. 3 NOZZLE DUCT & AIR SEAL
2092 UNUSUAL DAMAGE EVAL EA _____ _____
2093 SCRAP EA _____ _____

2094 NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted
STG. 3 NOZZLE DUCT and AIR SEAL
2095 UNUSUAL DAMAGE EVAL EA _____ _____
2096 SCRAP EA _____ _____

2097 NSN 2915 01 HS1 3688 3 EA _____ _____
P/N 6044T78G04
OVERSPEED DRAIN VALVE
2098 UNUSUAL DAMAGE EVAL EA _____ _____
2099 SCRAP EA _____ _____

2100 HOURLY RATE EA _____ _____

CONTRACT LINE ITEMS - OPTION PERIOD THREE
ONE YEAR PERIOD FOLLOWING OPTION PERIOD TWO
CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE

3001 NSN 2840 01 318 5538 4 EA _____ _____
P/N 6064T25G01
T700 ENGINE
3002 UNUSUAL DAMAGE EVAL EA _____ _____
3003 SCRAP EA _____ _____

3004 NSN 2840 01 317 6673 19 EA _____ _____
P/N 6064T26G01
COLD SECTION MODULE
3005 UNUSUAL DAMAGE EVAL EA _____ _____
3006 SCRAP EA _____ _____

3007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 30 EA _____ _____
P/N 6900T93G02 or P/N 6900T93G01
COMP,AXIAL
3008 UNUSUAL DAMAGE EVAL EA _____ _____
3009 SCRAP EA _____ _____

3010 NSN 2840 01 316 9791 18 EA _____ _____
P/N 6064T27G01
POWER TURBINE MODULE
3011 UNUSUAL DAMAGE EVAL EA _____ _____
3012 SCRAP EA _____ _____

3013 NSN 2840 01 305 6951 6 EA _____ _____
P/N 6071T04G02
STAGE 1, TURBINE NOZZLE
3014 UNUSUAL DAMAGE EVAL EA _____ _____
3015 SCRAP EA _____ _____

3016 NSN 2840 01 439 1684, 3 EA _____ _____
P/N 6058T13G12
STAGE 3, NOZZLE,DUCT and AIRSEAL
3017 UNUSUAL DAMAGE EVAL EA _____ _____
3018 SCRAP EA _____ _____

3019 NSN 2840 01 366 0532 4 EA _____ _____
P/N 6071T55G05
DIFFUSER MIDFRAME, CASE (3),GAS TURBINE
3020 UNUSUAL DAMAGE EVAL EA _____ _____
3021 SCRAP EA _____ _____

3020 NSN 2840 01 304 4302 20 EA _____ _____
P/N 6064T54G08
COMBUSTION CHAMBER
3023 UNUSUAL DAMAGE EVAL EA _____ _____
3024 SCRAP EA _____ _____

3025 NSN 4320 01 295 1989 3 EA _____ _____
P/N 5034T11P05
LUBE PUMP
3026 UNUSUAL DAMAGE EVAL EA _____ _____
3027 SCRAP EA _____ _____

3028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____
P/N 6043T35G01 Modify to P/N 5125T92G01
POWER TURBINE SHAFT
3029 UNUSUAL DAMAGE EVAL EA _____ _____
3030 SCRAP EA _____ _____

3031 NSN 2840 01 473 3556, 4 EA _____ _____
P/N 5125T92G01
POWER TURBINE SHAFT
3032 UNUSUAL DAMAGE EVAL EA _____ _____
3033 SCRAP EA _____ _____

3034 NSN 2840 01 143 9991 1 EA _____ _____
P/N 6053T29G01
SWIRL FRAME
3035 UNUSUAL DAMAGE EVAL EA _____ _____
3036 SCRAP EA _____ _____

3037 NSN 2840 01 301 8172 1 EA _____ _____
P/N 6039T56G05
SHAFT ASSY, A-SUMP
3038 UNUSUAL DAMAGE EVAL EA _____ _____
3039 SCRAP EA _____ _____


3040 NSN 2840 01 314 8595 5 EA _____ _____
P/N 5074T79G10
HMU, FUEL CONTROL
3041 UNUSUAL DAMAGE EVAL EA _____ _____
3042 SCRAP EA _____ _____

3043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____
P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37
HMU, FUEL CONTROL
3044 UNUSUAL DAMAGE EVAL EA _____ _____
3045 SCRAP EA _____ _____

3046 NSN 2915 01 492 3907 10 EA _____ _____
P/N 4046T52G37
HMU FUEL CONTROL
3047 UNUSUAL DAMAGE EVAL EA _____ _____
3048 SCRAP EA _____ _____

3049 NSN 2915 01 304 4299 10 EA _____ _____
P/N 4045T30G07
INJECTOR ASSY
3050 UNUSUAL DAMAGE EVAL EA _____ _____
3051 SCRAP EA _____ _____

3052 NSN 2840 01 287 1316 5 EA _____ _____
P/N 6039T19G07
GEARBOX, ACCESSORY
3053 UNUSUAL DAMAGE EVAL EA _____ _____
3054 SCRAP EA _____ _____

3055 NSN 2995 01 313 0691 5 EA _____ _____
P/N 4046T28G15
VALVE ASSY, ANTI-ICE
3056 UNUSUAL DAMAGE EVAL EA _____ _____
3057 SCRAP EA _____ _____

3058 NSN 2995 01 294 9867 12 EA _____ _____
P/N 4046T28G14
VALVE ASSEMBLY,ANTI
3059 UNUSUAL DAMAGE EVAL EA _____ _____
3060 SCRAP EA _____ _____

3061 NSN 2995 01 309 1391 10 EA _____ _____
P/N 4046T28G16
VALVE ASSY, ANTI-ICE
3062 UNUSUAL DAMAGE EVAL EA _____ _____
3063 SCRAP EA _____ _____




3064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____
P/N 3033T33G02 Modify to P/N 3033T33G03
FUEL BOOST PUMP
3065 UNUSUAL DAMAGE EVAL EA _____ _____
3066 SCRAP EA _____ _____

3067 NSN 2915 01 HS1 9178 35 EA _____ _____
P/N 3033T33G03
FUEL BOOST PUMP
3068 UNUSUAL DAMAGE EVAL EA _____ _____
3069 SCRAP EA _____ _____

3070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____
P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
3071 UNUSUAL DAMAGE EVAL EA _____ _____
3072 SCRAP EA _____ _____

3073 NSN 2995 01 460 1334 25 EA _____ _____
P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
3074 UNUSUAL DAMAGE EVAL EA _____ _____
3075 SCRAP EA _____ _____

3076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____
P/N 6071T19G02 Modify to P/N 6071T19G01
ACFT SEALS, CDP SEALS
3077 UNUSUAL DAMAGE EVAL EA _____ _____
3078 SCRAP EA _____ _____

3079 NSN 2840 01 HS1 4501 5 EA _____ _____
P/N 6071T19G01
ACFT SEALS, CDP SEALS
3080 UNUSUAL DAMAGE EVAL EA _____ _____
3081 SCRAP EA _____ _____

3082 NSN 2915 01 462 3670 1 EA _____ _____
P/N 3046T17G02
OVERSPEED DRAIN VALVE
3083 UNUSUAL DAMAGE EVAL EA _____ _____
3084 SCRAP EA _____ _____

3085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____
Modify to NSN 2840 01 476 1840
P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14
Modify to P/N 6082T04G16
MATCHED ASSY/GG ROTOR
3086 UNUSUAL DAMAGE EVAL EA _____ _____
3087 SCRAP EA _____ _____

3088 NSN 2840 01 476 1840 20 EA _____ _____
P/N 6082T04G16
MATCHED ASSY/GG ROTOR
3089 UNUSUAL DAMAGE EVAL EA _____ _____
3090 SCRAP EA _____ _____

3091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01
STG. 3 NOZZLE DUCT & AIR SEAL
3092 UNUSUAL DAMAGE EVAL EA _____ _____
3093 SCRAP EA _____ _____

3094 NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted
STG. 3 NOZZLE DUCT and AIR SEAL
3095 UNUSUAL DAMAGE EVAL EA _____ _____
3096 SCRAP EA _____ _____

3097 NSN 2915 01 HS1 3688 3 EA _____ _____
P/N 6044T78G04
OVERSPEED DRAIN VALVE
3098 UNUSUAL DAMAGE EVAL EA _____ _____
3099 SCRAP EA _____ _____

3100 HOURLY RATE EA _____ _____

CONTRACT LINE ITEMS - OPTION PERIOD FOUR
ONE YEAR PERIOD FOLLOWING OPTION PERIOD THREE
CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE

4001 NSN 2840 01 318 5538 4 EA _____ _____
P/N 6064T25G01
T700 ENGINE
4002 UNUSUAL DAMAGE EVAL EA _____ _____
4003 SCRAP EA _____ _____

4004 NSN 2840 01 317 6673 19 EA _____ _____
P/N 6064T26G01
COLD SECTION MODULE
4005 UNUSUAL DAMAGE EVAL EA _____ _____
4006 SCRAP EA _____ _____

4007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 20 EA _____ _____
P/N 6900T93G02 or P/N 6900T93G01
COMP,AXIAL
4008 UNUSUAL DAMAGE EVAL EA _____ _____
4009 SCRAP EA _____ _____

4010 NSN 2840 01 316 9791 15 EA _____ _____
P/N 6064T27G01
POWER TURBINE MODULE
4011 UNUSUAL DAMAGE EVAL EA _____ _____
4012 SCRAP EA _____ _____

4013 NSN 2840 01 305 6951 6 EA _____ _____
P/N 6071T04G02
STAGE 1, TURBINE NOZZLE
4014 UNUSUAL DAMAGE EVAL EA _____ _____
4015 SCRAP EA _____ _____

4016 NSN 2840 01 439 1684, 3 EA _____ _____
P/N 6058T13G12
STAGE 3, NOZZLE,DUCT and AIRSEAL
4017 UNUSUAL DAMAGE EVAL EA _____ _____
4018 SCRAP EA _____ _____

4019 NSN 2840 01 366 0532 4 EA _____ _____
P/N 6071T55G05
DIFFUSER MIDFRAME, CASE (3),GAS TURBINE
4020 UNUSUAL DAMAGE EVAL EA _____ _____
4021 SCRAP EA _____ _____

4020 NSN 2840 01 304 4302 20 EA _____ _____
P/N 6064T54G08
COMBUSTION CHAMBER
4023 UNUSUAL DAMAGE EVAL EA _____ _____
4024 SCRAP EA _____ _____

4025 NSN 4320 01 295 1989 3 EA _____ _____
P/N 5034T11P05
LUBE PUMP
4026 UNUSUAL DAMAGE EVAL EA _____ _____
4027 SCRAP EA _____ _____

4028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____
P/N 6043T35G01 Modify to P/N 5125T92G01
POWER TURBINE SHAFT
4029 UNUSUAL DAMAGE EVAL EA _____ _____
4030 SCRAP EA _____ _____

4031 NSN 2840 01 473 3556, 4 EA _____ _____
P/N 5125T92G01
POWER TURBINE SHAFT
4032 UNUSUAL DAMAGE EVAL EA _____ _____
4033 SCRAP EA _____ _____


4034 NSN 2840 01 143 9991 1 EA _____ _____
P/N 6053T29G01
SWIRL FRAME
4035 UNUSUAL DAMAGE EVAL EA _____ _____
4036 SCRAP EA _____ _____

4037 NSN 2840 01 301 8172 1 EA _____ _____
P/N 6039T56G05
SHAFT ASSY, A-SUMP
4038 UNUSUAL DAMAGE EVAL EA _____ _____
4039 SCRAP EA _____ _____

4040 NSN 2840 01 314 8595 5 EA _____ _____
P/N 5074T79G10
HMU, FUEL CONTROL
4041 UNUSUAL DAMAGE EVAL EA _____ _____
4042 SCRAP EA _____ _____

4043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____
P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37
HMU, FUEL CONTROL
4044 UNUSUAL DAMAGE EVAL EA _____ _____
4045 SCRAP EA _____ _____

4046 NSN 2915 01 492 3907 10 EA _____ _____
P/N 4046T52G37
HMU FUEL CONTROL
4047 UNUSUAL DAMAGE EVAL EA _____ _____
4048 SCRAP EA _____ _____

4049 NSN 2915 01 304 4299 10 EA _____ _____
P/N 4045T30G07
INJECTOR ASSY
4050 UNUSUAL DAMAGE EVAL EA _____ _____
4051 SCRAP EA _____ _____

4052 NSN 2840 01 287 1316 5 EA _____ _____
P/N 6039T19G07
GEARBOX, ACCESSORY
4053 UNUSUAL DAMAGE EVAL EA _____ _____
4054 SCRAP EA _____ _____

4055 NSN 2995 01 313 0691 5 EA _____ _____
P/N 4046T28G15
VALVE ASSY, ANTI-ICE
4056 UNUSUAL DAMAGE EVAL EA _____ _____
4057 SCRAP EA _____ _____




4058 NSN 2995 01 294 9867 12 EA _____ _____
P/N 4046T28G14
VALVE ASSEMBLY,ANTI
4059 UNUSUAL DAMAGE EVAL EA _____ _____
4060 SCRAP EA _____ _____

4061 NSN 2995 01 309 1391 10 EA _____ _____
P/N 4046T28G16
VALVE ASSY, ANTI-ICE
4062 UNUSUAL DAMAGE EVAL EA _____ _____
4063 SCRAP EA _____ _____

4064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____
P/N 3033T33G02 Modify to P/N 3033T33G03
FUEL BOOST PUMP
4065 UNUSUAL DAMAGE EVAL EA _____ _____
4066 SCRAP EA _____ _____

4067 NSN 2915 01 HS1 9178 35 EA _____ _____
P/N 3033T33G03
FUEL BOOST PUMP
4068 UNUSUAL DAMAGE EVAL EA _____ _____
4069 SCRAP EA _____ _____

4070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____
P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
4071 UNUSUAL DAMAGE EVAL EA _____ _____
4072 SCRAP EA _____ _____

4073 NSN 2995 01 460 1334 25 EA _____ _____
P/N 5066T38G07 or P/N 5066T38G08
VALVE ASSY, ANTI-ICE
4074 UNUSUAL DAMAGE EVAL EA _____ _____
4075 SCRAP EA _____ _____

4076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____
P/N 6071T19G02 Modify to P/N 6071T19G01
ACFT SEALS, CDP SEALS
4077 UNUSUAL DAMAGE EVAL EA _____ _____
4078 SCRAP EA _____ _____

4079 NSN 2840 01 HS1 4501 5 EA _____ _____
P/N 6071T19G01
ACFT SEALS, CDP SEALS
4080 UNUSUAL DAMAGE EVAL EA _____ _____
4081 SCRAP EA _____ _____



4082 NSN 2915 01 462 3670 1 EA _____ _____
P/N 3046T17G02
OVERSPEED DRAIN VALVE
4083 UNUSUAL DAMAGE EVAL EA _____ _____
4084 SCRAP EA _____ _____

4085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____
Modify to NSN 2840 01 476 1840
P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14
Modify to P/N 6082T04G16
MATCHED ASSY/GG ROTOR
4086 UNUSUAL DAMAGE EVAL EA _____ _____
4087 SCRAP EA _____ _____

4088 NSN 2840 01 476 1840 20 EA _____ _____
P/N 6082T04G16
MATCHED ASSY/GG ROTOR
4089 UNUSUAL DAMAGE EVAL EA _____ _____
4090 SCRAP EA _____ _____

4091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01
STG. 3 NOZZLE DUCT & AIR SEAL
4092 UNUSUAL DAMAGE EVAL EA _____ _____
4093 SCRAP EA _____ _____

4094 NSN 2840 01 362 4935 2 EA _____ _____
P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted
STG. 3 NOZZLE DUCT and AIR SEAL
4095 UNUSUAL DAMAGE EVAL EA _____ _____
4096 SCRAP EA _____ _____

4097 NSN 2915 01 HS1 3688 3 EA _____ _____
P/N 6044T78G04
OVERSPEED DRAIN VALVE
4098 UNUSUAL DAMAGE EVAL EA _____ _____
4099 SCRAP EA _____ _____

4100 HOURLY RATE EA _____ _____

Option Periods - Option periods, if exercised, will be in increments of twelve (12) months each, but will not exceed a total of forty-eight (48) months.

Statement of Work (SOW)

See Attachment A 
52.212-1 Instructions to Offerors Commercial Items (JUN 2008) ADDENDUM
52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998)
This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this Internet address http://acquisition.gov/far/index.html
(End of provision)
52.211-14 Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use (Apr 2008)
Any contract awarded as a result of this solicitation will be __ DX rated order; X DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation.
52.215-20 Requirements for Cost or Pricing Data or Information Other Than Cost or Pricing Data (Oct 1997) Alternate IV (Oct 1997) As prescribed in 15.408(I), replace the text of the basic provision with the following:
(a) Submission of Cost or pricing data is not required
(b) Submit Other Than Cost or Pricing Data as if you were submitting Cost and Pricing Data. The requirement for certified cost and pricing data is waived. Submission of other than cost and pricing data must be in the format used in FAR 15.403-5(b)(2).
52.217-5 Evaluation of Options (July 1990)

To receive an award, the company must be registered in the Central Contractor Registration Database (CCR).

A Small Business Subcontracting Plan FAR 52.219-9 is required with the offer.

(End of FAR 52.212-1 ADDENDUM)

52.212-2 Evaluation -Commercial Items (Jan 1999)
(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer, conforming to the solicitation, will be most advantageous to the Government. Offers that are significantly higher or lower than the government's estimate may be considered an indication that the offeror does not understand the requirement and may be evaluated as posing a significant performance risk. The following factors shall be used to evaluate offerors are listed in order of importance. Evaluation Factors: Technical capability, Past Performance, Delivery and Price. Technical and past performance, when combined, is significantly more important than cost or price. This is a best value, commercial item acquisition; award may be made for other than lowest price. The Government intends to award to a responsible offeror whose offer conforms to the solicitation, and provides the Government with the best value, price and other factors considered.
Technical Capabilities
Offerors are to provide a statement of technical qualifications, including a summary of the technical expertise, facilities and documentation for overhauling the components listed in the schedule.
Past Performance
Offerors shall provide information on two (2) contracts performed by their organization over the past three years for the GE T700 engine. The contractor shall submit the Past Performance Questionnaire (Attachment B) to two (2) references for completion and return to the address shown on the Questionnaire no later than the closing date of this solicitation. See attachment B for Questionnaire and instructions.
Delivery
Offerors shall provide delivery dates based on receipt of unit from the Government.
Price
Offerors shall provide unit, unusual damage evaluation and scrap pricing. The Government will evaluate quotes for award purposes by adding the total price for all items.

52.212-3 Offeror Representations and Certifications - Commercial Items (Aug 2009) Alternate I (Apr 2002)
An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision.

52.212-4 CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEMS (MAR 2009) ADDENDUM

52.252-2 Clauses Incorporated By Reference (Feb 1998)
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this Internet address http://acquisition.gov/far/index.html
52.216-18 Ordering (Oct 1995)
(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from Date of Award or Date of Exercise of an Option through One Year from Date of Award or One Year from the Date of Exercise of an Option Period.
(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.
(c) If mailed, a delivery order or task order is considered "issued" when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule.
(End of clause)
52.216-19 Order Limitations (Oct 1995)
(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than one (1) each of any line item [insert dollar figure or quantity], the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.
(b) Maximum order. The Contractor is not obligated to honor-
(1) Any order for a single item in excess of Any Line Item's Total Value [insert dollar figure or quantity];
(2) Any order for a combination of items in excess of The applicable Base or Option Year Total Dollar Value [insert dollar figure or quantity]; or
(3) A series of orders from the same ordering office within 10 days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section.
(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.
(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source. (End of clause)
52.216-21 Requirements (Oct 1995)
(a) This is a requirements contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies or services specified in the Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government's requirements do not result in orders in the quantities described as "estimated" or "maximum" in the Schedule, that fact shall not constitute the basis for an equitable price adjustment.
(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. Subject to any limitations in the Order Limitations clause or elsewhere in this contract, the Contractor shall furnish to the Government all supplies or services specified in the Schedule and called for by orders issued in accordance with the Ordering clause. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.
(c) Except as this contract otherwise provides, the Government shall order from the Contractor all the supplies or services specified in the Schedule that are required to be purchased by the Government activity or activities specified in the Schedule.
(d) The Government is not required to purchase from the Contractor requirements in excess of any limit on total orders under this contract.
(e) If the Government urgently requires delivery of any quantity of an item before the earliest date that delivery may be specified under this contract, and if the Contractor will not accept an order providing for the accelerated delivery, the Government may acquire the urgently required goods or services from another source.
(f) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after determined at time of award based on six (6) months after expiration date of ordering period [insert date]. (End of clause)
52.217-5 Evaluation of Options (Jul 1990)
52.217-9 Option to Extend the Term of the Contract (Mar 2000)
(a) The Government may extend the term of this contract by written notice to the Contractor within 30 calendar days prior to expiration [insert the period of time within which the Contracting Officer may exercise the option]; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 45 calendar days [60 days unless a different number of days is inserted] before the contract expires. The preliminary notice does not commit the Government to an extension.
(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.
(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed Five (years). (End of clause)
52.232-19 Availability of Funds for the Next Fiscal Year (Apr 1984)
Funds are not presently available for performance under this contract beyond 30 September 2010. The Government's obligation for performance of this contract beyond that date is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise for performance under this contract beyond 30 September 2010, until funds are made available to the Contracting Officer for performance and until the Contractor receives notice of availability, to be confirmed in writing by the Contracting Officer.(End of clause)
52.246-15 Certificate of Conformance (Apr 1984)
52.247-45 F.O.B. Origin and/or F.O.B. Destination Evaluation (Apr 1984)

52.212-5 Contract Terms and Conditions to Implement Statutes or Executive Orders - Commercial Items (Feb 2010)
a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
(1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)).
(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).
(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004)(Pub. L. 108-77,108-78)
(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
[Contracting Officer check as appropriate.]
_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).
_X_ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Dec 2008) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).
__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (MAR 2009) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)
__ (4) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Mar 2009) (Pub. L. 111-5).
__ (5) 52.219-3, Notice of Total HUBZone Set-Aside (Jan 1999) (15 U.S.C. 657a).
__ (6) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JULY 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).
__ (7) [Reserved]
__ (8)(i) 52.219-6, Notice of Total Small Business Set-Aside (June 2003) (15 U.S.C. 644).
__ (ii) Alternate I (Oct 1995) of 52.219-6.
__ (iii) Alternate II (Mar 2004) of 52.219-6.
__ (9)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).
__ (ii) Alternate I (Oct 1995) of 52.219-7.
__ (iii) Alternate II (Mar 2004) of 52.219-7.
_X_ (10) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)).
_X_ (11)(i) 52.219-9, Small Business Subcontracting Plan (Apr 2008) (15 U.S.C. 637(d)(4)).
__ (ii) Alternate I (Oct 2001) of 52.219-9.
__ (iii) Alternate II (Oct 2001) of 52.219-9.
_ (12) 52.219-14, Limitations on Subcontracting (Dec 1996) (15 U.S.C. 637(a)(14)).
_X_ (13) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).
__ (14)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer).
__ (ii) Alternate I (June 2003) of 52.219-23.
__ (15) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Apr 2008) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).
__ (16) 52.219-26, Small Disadvantaged Business Participation Program- Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).
__ (17) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f).
_X_ (18) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a)(2)).
_X_ (19) 52.222-3, Convict Labor (June 2003) (E.O. 11755).
_X_ (20) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Aug 2009) (E.O. 13126).
_X_ (21) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).
_X_ (22) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).
_X_ (23) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212).
_X_ (24) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) (29 U.S.C. 793).
_X_ (25) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212).
_ _ (26) Reserved
__ (27) 52.222-54, Employment Eligibility Verification (JAN 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)
__ (28)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
__ (29) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b).
__ (30)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423).
__ (ii) Alternate I (DEC 2007) of 52.223-16.
_ _ (31) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d).
__ (32)(i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (June 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138).
__ (ii) Alternate I (Jan 2004) of 52.225-3.
__ (iii) Alternate II (Jan 2004) of 52.225-3.
_X_ (33) 52.225-5, Trade Agreements (AUG 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).
_X_ (34) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).
__ (35) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).
__ (36) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).
__ (37) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).
__ (38) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).
_X_ (39) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332).
__ (40) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332).
__ (41) 52.232-36, Payment by Third Party (May 1999) (31 U.S.C. 3332).
__ (42) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).
__ (43)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).
__ (ii) Alternate I (Apr 2003) of 52.247-64.
(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
[Contracting Officer check as appropriate.]
__ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).
__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).
__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).
__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).
__ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.).
__ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.).
__ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247).
__ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).
(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.
(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.
(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.
(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.
(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-
(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Dec 2008) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).
(ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.
(iii) [Reserved]
(iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).
(v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212).
(vi) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793).
(vii) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (Dec 2004) (E.O. 13201).
(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).
(ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)).
___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).
(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.).
(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.).
(xii) 52.222-54, Employment Eligibility Verification (JAN 2009).
(xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.
(xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.
(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause)