One (1) Fryer Machine Systems VT-40 VERTICAL TURRET LATHE
Closed Pre-Solicitation Posted
- Solicitation number
- 27-15-2000
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- 3416 Lathes
- Place of performance
- Stennis Space Center, Mississippi, United States
- Points of contact
-
- Christopher Bara avnipemarketresearch@dla.mil
Notice details come from SAM.gov. Updated .
About this opportunity
Defense Logistics Agency Aviation is conducting market research through a sources sought notice to identify vendors capable of supplying one Fryer Machine Systems VT-40 vertical turret lathe, with responses due by September 30, 2026. This is not a solicitation and does not constitute a commitment to award; the agency uses the results to determine the procurement method.
Place of performance is Naval Oceanographic Office, Stennis Space Center. Interested parties must demonstrate capability to provide the lathe with turnkey services including IUID, rigging, training, and shipping. Responses should not exceed ten single-sided 8.5-by-11-inch pages in 10-point font minimum and must be submitted via email to avnipemarketresearch@dla.mil with the subject line "ATTN: 27-15-2000" by the SAM.gov closing date. The NAICS code is 333517 (Machine Tool Manufacturing); PSC is 3416 (Lathes). No funds are available to reimburse response preparation costs, and the government will provide no feedback or evaluations to respondents. Telephone inquiries will not be accepted.
Notice text
The DLA Weapons Support Richmond is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for a One (1) Fryer Machine Systems VT-40 VERTICAL TURRET LATHE. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 333517.
THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNIAL DESCRIPTION IS STRICTLY VOLUNTARY.
Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties should submit a response to this Sources Sought Notice by SAM.gov closing date listed on this notice. All responses under this Sources Sought Notice must be emailed to avnipemarketresearch@dla.mil and marked as ATTN: 27-15-2000. Responses should be not exceed ten (10) one-sided 8.5 x 10 inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to perform this requirement.
Interested parties that can provide the required One (1) Fryer Machine Systems VT-40 VERTICAL TURRET LATHE with turnkey services including: IUID, rigging, training, and shipping may identify their interest and capability to respond to this requirement no later than the stated closing date/time.
Place of performance is Naval Oceanographic Office, Stennis Space Center, MS.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| One (1) DN PUMA Vertical Turning Center (VTC) 1620M Machine | Aviation | No set-aside | |
| FD2030-26-01947 | Aviation | No set-aside | |
| FD2030-22-01649-02 | Aviation | No set-aside | |
| NSN 2840-01-443-4245, metallic aircraft gas turbine engineering seal, wsdc: 69N, f-404 engine | Aviation | No set-aside | |
| FD2030-26-02271 | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity