NTC 3D Relief Map
Closed Pre-Solicitation Posted
A later notice was posted: the Limited / Sole Source Justification from .
- Solicitation number
- 24Q0075
- Agency
-
MICC Fort Hood
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 541370 Surveying and Mapping (except Geophysical) Services
- Place of performance
- Fort Riley, Kansas 66442, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Hood (MICC Fort Hood) is seeking a contractor to provide a nonrecurring design, tooling, and set-up of a 3D Terrain Map of the National Training Center (NTC) at Fort Irwin, California. The 3D map must be a solid and mobile means to conduct long-range sandbox planning, measuring 8' by 5.8' with a scale of 1:24,000 and up to 3" of vertical relief. The map must be constructed in four separate panels that can be joined together for display and transported in Pelican boxes. The contractor must be able to integrate data, design the 3D map, construct the thermoform molds, set up production, and design the transport cases. Responses to this Sources Sought notice are due by July 29, 2024.
This procurement is not set aside for any particular type of business. The NAICS code is 541370 - Surveying and Mapping (except Geophysical) Services, and the PSC code is T014-P - Photo/Map/Print/Publication-Topography. No information was provided about potential incumbent contractors or award values, and the notice did not specify a budget range for the project.
Notice text
THIS IS A Sources Sought Notice ONLY. 3D Relief Map: 8' by 5.8' tabletop 3D map that is a solid and mobile means to conduct long range sandbox planning. Nonrecurring design, tooling, set-up of 3D Terrain Map of NTC at Fort Irwin, CA. 3D area 96" x 69.5", with overall size about 100" x 74", scale 1:24,000, with up to 3" of vertical relief. Map to be constructed with four separate panels to be joined together for display. 3D map must be able to utilize production-ready map graphics of custom 1st ABCT map overlay. Must be able to draw unit graphics on the 3D map via dry erase markers. Task includes data integration, 3D design, thermoform mold design/construction (4 sets), production setup, and transport case design. 3D map must be able to be broken up in 4 large panels to fit in 4 separate Pelican boxes for transportation. 4 panels to be joined together for display on a horizontal table.
The Offeror shall be actively registered with that 541370 1NAICS or a similar NAICS with the appropriate size standard.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Cohesity | Limited / Sole Source Justification | |
| This notice | Pre-Solicitation |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity