NSN 1560-014704103, Duct Assembly, WSDC 56F
Closed Pre-Solicitation Posted
Not the latest version. See the latest pre-solicitation from .
- Solicitation number
- SPE4A725R0641
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336411 Aircraft Manufacturing
- PSC
- 1560 Airframe Structural Components
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency (DLA) Aviation is conducting a Sources Sought Notice for NSN 1560-014704103, a duct assembly with Weapon System Designator Code 56F. The agency is performing market research to identify companies capable of manufacturing or legitimately obtaining this specific component. Interested parties must submit a response to the Sources Sought Notice by May 17, 2025, at 2:00 PM Eastern Standard Time, with all submissions emailed directly to Tatjana Klemmer at tatjana.vaughan@dla.mil. Companies seeking to be considered as an "Approved Source" must submit a comprehensive Source Approval Request (SAR) package through the SAR Program, demonstrating their ability to manufacture the product at an equal or superior quality level to currently approved manufacturers. The onus is on the contractor to document and prove their product meets or exceeds the technical and quality standards of the existing item.
Currently, the duct assembly is manufactured by four companies: Senior Operations (CAGE 98769), D-J Engineering Inc (CAGE 0C7H8), Camnetics Manufacturing Corp (CAGE 0P657), and FMW Inc (CAGE 1QJK4). There are no specific set-aside designations for this opportunity, and the notice emphasizes that it is for informational purposes only and does not constitute a formal solicitation. The SAR review process can take up to 180 days, and submissions may not be processed if deemed not cost-effective due to low item demand. Potential contractors are advised to review the DLA Supplier Requirements Visibility Application for estimated forecasting requirements and can use PUB LOG FLIS to verify the number of services using this specific National Stock Number. The contracting office is located at 6090 Strathmore Rd., Richmond, VA 23237.
Notice text
Defense Logistics Agency (DLA) Aviation is issuing this Sources Sought Notice as a means of conducting market research to determine if other companies are capable of manufacturing (or legitimately obtaining) the following item: NSN 1560-014704103, duct assembly. This item is currently manufactured under part number 1807622-103 by:
- Senior Operations (CAGE 98769)
- D-J Engineering Inc (Cage 0C7H8)
- Camnetics Manfucturing Corp (Cage 0P657)
- FMW Inc (Cage 1QJK4)
The Weapon System Designator Code is 56F.
This Sources Sought Notice is for informational purposes only. This is not a request for an offer. This does not constitute as a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary.
Interested parties who consider themselves qualified to manufacture (or legitimately obtain) the above listed supplies are invited to submit a response to this Sources Sought Notice by May 17, 2025, 2:00pm Eastern Standard Time. All responses under this Sources Sought Notice must be emailed to Tatjana Klemmer at tatjana.vaughan@dla.mil.
Contracting Office Address: 6090 Strathmore Rd., Richmond, VA 23237
Primary Point of Contact: Tatjana Klemmer, Contract Specialist, Email: tatjana.vaughan@dla.mil
If your company desires to be reviewed and qualified as an "Approved Source" for this item, submit an application package through the Source Approval Request (SAR) Program as outlined in the attached JACG SAM HB document. A SAR package contains all of the technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality, or better, than the required item. The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item, which DLA Aviation is procuring.
Files
| File | Type | Posted |
|---|---|---|
| SAR Handbook.pdf | ||
| AVN SAR Submit Instructions.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| NSN 1560-014704103, Duct Assembly, WSDC 56F | Limited / Sole Source Justification | |
| NSN 1560-014704103, Duct Assembly, WSDC 56F | Pre-Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Duct assembly | Aviation | Total Small Business | |
| Duct assembly, air cond | Aviation | No set-aside | |
| Duct assembly, air cond | Aviation | No set-aside | |
| Duct assembly, air cond | Aviation | Total Small Business | |
| NSN: 1560007163031, duct, bleed air, wsdc: 05F aircraft stratolifter KC-135 | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity