New Manufactured Material J85 Rotor, Compressor, AI_NSN 2840-01-630-9064 OK
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from , or the latest solicitation from .
- Solicitation number
- SPRTA1-26-R-0202
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336412 Aircraft Engine and Engine Parts Manufacturing
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Aviation is seeking to procure new manufactured J85 Rotor Compressor components (NSN 2840-01-630-9064, PN 5126T28G11) for aircraft engine applications. This procurement will be conducted through a Request for Proposal (RFP #SPRTA1-26-R-0202) with an estimated solicitation issue date of April 13, 2026, and an estimated closing date of May 13, 2026. The rotor compressor serves a critical function in compressing induced air through eight stages of rotor blades before delivery to the combustion section, and must meet specific dimensional and material specifications including Inconel 718 body construction and AM355 Steel blades, measuring 27 inches in length with a total weight of 70 pounds. While the government has indicated it intends to conduct limited source competition under FAR 6.302 authority, interested firms are encouraged to submit capability statements to demonstrate their qualification to fulfill these requirements. All communication must be submitted in written or faxed format only, with electronic procedures to be used for the formal solicitation process, and an appointed Ombudsman is available to address concerns from potential offerors during the proposal development phase.
This procurement carries no set-aside designation and GE Aviation (CAGE code 99207) is currently identified as the only known source capable of satisfying the government's requirements, though the government retains sole discretion to determine whether competitive procurement will be conducted based on responses received. The estimated quantity is 488 units, with a quantity range of 125 to 748 units depending on final requirements. The requested delivery schedule is October 31, 2028, providing contractors with approximately two and one-half years for manufacturing and delivery. Export control considerations are not applicable to this procurement. While no specific award value or budget range is disclosed in this pre-solicitation notice, the substantial quantity requirements and complex manufacturing specifications indicate a significant contract value. Potential offerors should prepare comprehensive proposals addressing technical capabilities, manufacturing capacity, and schedule feasibility to compete for this defense logistics acquisition.
Notice text
SYNOPSIS – J85 ROTOR,COMPRESSOR,AI
- Estimated solicitation issue date 13 April 26 and estimated closing/response date 13 May 26.
- RFP #: SPRTA1-26-R-0202
- PR#: FD2030-26-00074
- Nomenclature/Noun: ROTOR,COMPRESSOR,AI
- NSN: 2840-01-630-9064 OK
- PN: 5126T28G11
- Application (Engine): J85
- AMC: 3V
- History: GE Aviation
- Description: Dimensions: Length 27 in, Width 15.78 in, Height 15.78 in, Weight 70lbs. Material: Inconel 718 (body) and AM355 Steel (blades). Function: Induced air is compressed as it passes through the eight stages of rotor blades into the combustion section for light-off.
- Best Estimated Quantity: 488, Quantity Range 125-748
- Requested delivery scheduled: 31 Oct 2028
- Ship To: SW3211
- Export Control is not applicable
Mandatory Language: Electronic procedures will be used for this solicitation. No telephone requests. Only written or faxed requests received directly from the requestors are acceptable. The purposed contract action is for supplies for which the Government intends to solicit and compete with only a limited number of sources under the authority of FAR 6.302. Currently GE (CAGE code 99207) is the only known source that can satisfy the Government requirements. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Note: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 855-3556. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.
Based upon market research, the Government is using the policies contained in Far Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice
A letter request for proposal will be available for download on the release date from sam.gov. No telephone requests. Questions concerning this synopsis or subsequent solicitation can be directed to Breann Irving at 385-591-1658 or email breann.irving@us.af.mil. Note: Faxed solicitation requests can be submitted to DLA Aviation-AOAB, Tinker AFB, OK 73145, FAX NUMBER (405) 739-4237.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Redacted J&A | Limited / Sole Source Justification | |
| New Manufactured Material J85 Rotor, Compressor, AI_NSN 2840-01-630-9064 OK | Award Notice | |
| New Manufactured Material J85 Rotor, Compressor, AI_NSN 2840-01-630-9064 OK | Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| New Manufacture Material NSN 2840-01-527-6505PR (AMC 3V) | Aviation | No set-aside | |
| Rotor, compression | Aviation | No set-aside | |
| COMPRESSOR ROTOR_End_Item_J85_NSN_2840016309064OK_PN_5126T28G08 | Aviation | No set-aside | |
| New Manufactured Material, NSN 2840-01-533-0151 PR (AMC 3V) | Aviation | No set-aside | |
| New Manufacture Material, NSN 2840016760196PR (AMC 3R) | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity