Mycronic Pick and Place Machine
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N6893626Q5167
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334413 Semiconductor and Related Device Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Air Warfare Center Weapons Division, Airborne Instrumentation Division, is procuring a Mycronic Surface Mount Technology line upgrade on a sole-source basis, with quotations due August 31, 2026 at 4:00 pm EST.
This RFQ is issued solely to Mycronic Inc. under FAR 6.302-1, as Mycronic is the only known responsible source capable of satisfying the requirement. Mycronic is the Original Equipment Manufacturer of the Mycronic MYPRO SMT System and possesses proprietary technical data, software rights, and factory-trained field service engineers required for installation, integration, and calibration.
The procurement encompasses one Mycronic MYPRO S30 Stencil Printer Machine, one Mycronic MYPRO PI PICO 3D Solder Paste Inspection Machine, one Mycronic MYPRO A40LX-17 Pick-and-Place Machine, one Mycronic SMT Line Automatic Loader, nine Mycronic SMT Line Conveyor ED600 units, one Mycronic SMT Line Conveyor ED1200, one Mycronic SMT Line Workstation ED1200WS, one Mycronic SMT Line Turn Unit 610MM, together with installation, integration, commissioning, on-site operator and maintenance training, technical documentation, and warranty support.
This is a combined synopsis and solicitation issued under FAR Part 12 for commercial products. The RFQ is issued on a commercial item basis; no separate written solicitation will follow. Quotations should be submitted to Contract Specialist Joyce Toye at joyce.n.toye2.civ@us.navy.mil. The NAICS code is 334413, Semiconductor and Related Device Manufacturing; the PSC code is 5961, Semiconductor Devices and Associated Hardware.
Notice text
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Federal Acquisition Regulation (FAR) part 12. This announcement constitutes the only solicitation. An Offer is being requested, and a separate written solicitation will not be issued. This Request for Quotation (RFQ) is issued on a sole-source basis to Mycronic Inc. (Mycronic) in accordance with Federal Acquisition Regulation (FAR) 6.302-1, “Only one responsible source and no other supplies or services will satisfy agency requirements.”
The Naval Air Warfare Center Weapons Division (NAWCWD), Airborne Instrumentation Division (AID), has a requirement for the procurement, delivery, installation, and integration of Surface Mount Technology (SMT) line upgrade equipment. Specifically, this requirement is for: (1) Mycronic MYPRO S30 Stencil Printer Machine, (1) Mycronic MYPRO PI PICO 3D Solder Paste Inspection Machine, (1) Mycronic MYPRO A40LX-17 Pick-and-Place Machine, (1) Mycronic SMT Line Automatic Loader, (9) Mycronic SMT Line Conveyor ED600, (1) Mycronic SMT Line Conveyor ED1200, (1) Mycronic SMT Line Workstation ED1200WS, (1) Mycronic SMT Line Turn Unit 610MM, installation, integration, and commissioning, On-site operator and maintenance training, and technical documentation and warranty support.
Mycronic is the only known source capable of satisfying this requirement because it is the Original Equipment Manufacturer (OEM) of the Mycronic MYPRO SMT System. Mycronic possesses proprietary technical data, software rights, and factory-trained filed service engineers required to install, integrate, and calibrate the equipment.
Mycronic should submit its quotation for RFQ N6893626Q5167 no later than August 31, 2026, at 4:00 pm Eastern Standard Time (EST) to the Contract Specialist Joyce Toye atjoyce.n.toye2.civ@us.navy.mil.
This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.
The contractor must be registered in the System for Award Management (SAM) at https://sam.gov/ to be eligible for award.
Contractors requiring access to unclassified export-controlled technical data must possess an active Joint Certification Program (JCP) certification. Information regarding JCP certification and DD Form 2345 requirements is available on the Defense Logistics Agency website at https://www.dla.mil/Logistics-Operations/Services/Joint-Certification-Program/.
Questions regarding this solicitation shall be submitted by email to Joyce Toye at joyce.n.toye2.civ@us.navy.mil.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Mycronic Pick and Place Machine | Limited / Sole Source Justification | |
| Mycronic Pick and Place Machine | Award Notice | |
| This notice | Solicitation | |
| Mycronic Pick and Place Machine | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Electronic componen, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Circuit card assemb | Naval Supply Systems Command | No set-aside | |
| Electronic componen | Naval Supply Systems Command | No set-aside | |
| Receiver, countermea | Naval Supply Systems Command | No set-aside | |
| Processor assembly | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity