Multi-Purpose Trash Boat, Shore Loading Conveyor Trailer and Tilt-Desk Trailer

The U.S. Bureau of Reclamation (BOR), Interior Region 10, California-Great Basin, Division of Acquisitions, Sacramento, CA is seeking interested vendors who can provide a name brand or equal trash boat, conveyor trailer and tilt-deck trailer. Specific details for the items are as follows:

Below are the specifications for the requested Brand-Name items. If the proposed vendor will not be providing the Name-Brand items, they must propose an item that meets, or exceeds the below specifications for the trash boat, tilt trailer and conveyor trailer.

**Please note this is a complete system, the boat trailer and conveyor need to seamlessly integrate and work together for ease of use and be provided by same manufacturer.

Tilt Deck Boat Trailer: designed to tilt and lower the boat into waterways with ease and specifically designed to be compatible with the boat.
- Model: AlphaBoats TLT-800
- Hydraulic Winch Capacity: 12,000 lbs
- Engine Output: 14 HP engine with hydraulic power pack

Shore Loading Conveyor Trailer: designed to take trash from the boat and dump debris into dumb truck or tailer. Conveyor trailer must work seamlessly with boat for ease of use.
- Model: AlphaBoats Shore Conveyor SL-6036
- Storage hold container shall be self-draining and have a minimum capacity of 210 cu. ft.
- Max Hydro Pressure: 3000 PSI
- Max Hydro Flow: 8.0 GPM
- Belt Type: Heavy-duty stainless-steel mesh
- Hydraulically powered lift frame with cylinders, safety valves and ground pads

Hydro-Mate Multi-Purpose Boat: designed for aquatic weed and plant harvesting, trash collection, dredging-excavating, and shoreline improvement.
- Model: AlphaBoats AM-2000
- Four (4) lifting eyes and four (4) tie down cleats to safely lift by means of a crane
- Bow of hull shall be approximately 30-degree angle from horizontal
- Hydraulic Crane - lift capacity, fully extended without attachments minimum 1100 lbs to include the following attachments:
A. Clam Shell, c/w Drains & Rotor
B. Single Acting Rake 4 Ft Wide w/ cylinder
C. Double Acting Rake Rigid Mounted 4 Ft Wide w/ 2 cylinders
D. Trash Debris Skimmer Head
E. Weed Harvesting Head

- Conveyor drive system minimum 23 ft long and belt speed 20 ft per minute minimum
- Storage hold container shall be self-draining and have a minimum capacity of 390 Cu. Ft.
- Discharge container shall be self-draining and have a minimum capacity of 140 Cu. Ft.
- Drive Shaft: Two storage conveyor drive shafts are required
- Engine should be mounted on a raised platform for ease of servicing and protection
- Fuel Tanks: Fix mounted steel construction, approximately 30 gallons
- Hydraulic Reservoir: Steel construction and minimum capacity of 70 gallons
- Paddle Wheels: Two bi-directional paddle wheels, center mounted and powered independently.

Notice Number 140R2022Q0049 has been assigned to this requirement and should be referenced on all correspondence regarding this announcement.

Firms believing, they can provide these items must submit written notice to the Contracting Office and must provide evidence/ documentation in sufficient detail that demonstrate the respondent¿s ability to meet the stated requirement.

Responses shall include the firm¿s Name, Contract Information and Dun and Bradstreet number (DUNs).

NAICS code 336612 ¿ Boat Building.

Please note that any prospective offeror must be registered in the System for Award Management (SAM) at www.sam.gov in accordance with FAR subpart 4.11.

The following information is pertinent to this notice:
1. Responses shall be submitted by 1500 PST, Friday, March 18, 2022
2. Point of Contact: Sherry Heibeck, Contract Specialist
a. sheibeck@usbr.gov
b. (916) 978-6188