Mounted Bucket and Installation

Need to redo to MICC standard.

.

Brand Name or Equal to Terex LT40 Aerial Device
Installation will be at Vender's Location
Mounted Bucket Equipment Specs
Working Height- 45'6"
Lower Controls- Individual Levers @ turntable
Lower Boom- Filament Wound High Strength Fiberglass Insert Providing Insulation Gap
Upper Boom- Filament Wound High Strength Fiberglass Boom Probiding Insulation Gap
Boom Rest w/Ratchet Style Tie Down
Rotation Self-Locking Worm Gear
Rotation Drive Provided and Equipped with Bi-Derectional Motor
Continuous Unrestricted Rotation
Rated for 46KV Category C Machine in Accordance w/ ANSI/SIA A92.2-2009
Full Pressure Open Center Hydraulic System
Powder Coat Painted White
Two Complete Service Manuals
Warning Decals
Pedestal w/20 Gallon Integral Tank
20" x 30" x 42" End Mounted Platform w/ [1] Access Step w/Non-Slip Surface
Safety Harness and Lanyard
Insulated Platform Liner Tested at 50KV AC
Waterproof Platform Cover
Auxiliary Power
Boom Tip w/4-Function Controls and Platform Rotator
Upper Controls- "Control Plus" Single Stick Controller Platform Rated @ 400 lbs
Hydraulic Platform Rotator
Hydraulic Platform Tilt @ Lower Control
Hydraulic Tool Outlets @ Platform
Engine Stop/Start Controlled at Platform and Lower Controls
Chassis Specifications
Customer supplied 2014 Ford F550 4x4 V10 Gas Engine
Install to include:
Remove service body and rear bumper
Install Terex sub-frame
Install torsion bar for stability
Rear spring build up
Sumo front spring helpers
Under hood hydraulic pump
Reinstall body
Supply and install 24" tail shelf
Install new Terex LT40 aerial device
Preform Stability, Dielectric and operational tests when complete
Note: No body repair or paint work on used body or chassis. Boom rest, Tail shelf, and rear under drive protection to be painted Glass Black..