Milling Machine Movement
Closed Solicitation Posted
- Solicitation number
- N6426724Q0109
- Agency
- Naval Sea Systems Command Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 484110 General Freight Trucking, Local
- Place of performance
- Riverside, California, United States
- Points of contact
-
- Colin Dwyer colin.dwyer.civ@us.navy.mil (951) 393-4114
Notice details come from SAM.gov. Updated .
About this opportunity
This is a combined synopsis/solicitation issued by the Department of the Navy Naval Sea Systems Command for the commercial acquisition of a milling machine movement requirement, Solicitation Number N6426724Q0109. The Government is seeking quotes from responsible offerors registered in SAM to retrieve and transport a Deckel Maho milling machine weighing approximately 10,000 lbs from the University of California Riverside to the Naval Surface Warfare Center Corona Division. This is an all-or-none requirement, and the award will be made on a single purchase order to the responsible offeror whose quote conforms to the solicitation and is most advantageous based on the evaluation criteria in Sections L and M. Quotes are due by the response date of March 30, 2024 and must be submitted electronically.
This procurement is set aside for small businesses. The applicable NAICS code is 488510 - Freight Transportation Arrangement, and the PSC code is V113 - Cargo, including Related Loading and Unloading Services. The Government has not identified any potential incumbent contractors. The award value is unknown, but the solicitation requires offerors to be located within a 60-mile radius of the pickup location in Riverside, California.
Notice text
2 versions
Update #2 · Latest ·
The purpose of this amendment is to update the solicitation end date to that of the RFQ document. All other terms and conditions remain the same.
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2024-03 February 23, 2024. The provisions at 52.212-1, 52.212-3 and the clauses at 52.212-4, 52.212-5 apply to this acquisition; no addenda are attached.
This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation.
Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to the email address in the posting.
Any amendment(s) issued to this Request for Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement. No telephone requests.
Update #1 ·
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2024-03 February 23, 2024. The provisions at 52.212-1, 52.212-3 and the clauses at 52.212-4, 52.212-5 apply to this acquisition; no addenda are attached.
This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation.
Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to the email address in the posting.
Any amendment(s) issued to this Request for Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement. No telephone requests.
Attachments
| File | Type | Posted |
|---|---|---|
| DM Milling Machine UCR Pic 4.jpg | JPG image | |
| DM Milling Machine UCR Pic 1.jpg | JPG image | |
| 9. SCA Wage Determination WD 2015-5629_retrieved 3-15-2024.pdf | ||
| DM Milling Machine UCR Pic 2.jpg | JPG image | |
| N6426724Q0109 RFQ.pdf | ||
| DM Milling Machine UCR Pic 6.jpg | JPG image | |
| DM Milling Machine UCR Pic 5.jpg | JPG image | |
| Map- UCR pickup location.pdf | ||
| Map- NSWC Corona Drop site.pdf | ||
| DM Milling Machine UCR Pic 3.jpg | JPG image |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity