Military Housing Office Inspection Kits

Closed Solicitation Posted

Solicitation number
MHO194
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

Place of performance
San Antonio, Texas 78226, United States

Notice details come from SAM.gov. Updated .

About this opportunity

Written by GovTribe AI ·

The Department of the Air Force Materiel Command Installation and Mission Support Center seeks 194 units each of inspection kits comprising binoculars, borescopes, combination infrared and probe thermometers, combustible gas meters with leak detection, GFCI testers, water pressure testers, and thermal imagers, with proposals due July 6 and delivery by July 30. The procurement is a Total Small Business set-aside.

Place of performance is San Antonio, Texas. The solicitation specifies acceptable makes and models with detailed technical equivalency criteria. Binoculars must be Fujinon 10x50, Steiner 10x50 Military Marine, or equivalent, with magnification of 10x, objective lens diameter no less than 50mm, field of view no less than 327 feet at 1,000 yards, auto focus, fully coated high contrast optics, close focus no more than 75 feet, IP distance 56–74mm, diopter range ±5, luminosity no less than 25, rubber armoring, waterproof housing rated for minimum 8G impact, and included objective covers, carrying case, and neck strap. Borescopes must be Teslong TD-500, Kentfaith Dual-Lens Articulating Borescope, or equivalent, with 1.0 megapixel minimum camera, 2-way articulating probe with 210-degree articulation and diameter no greater than 8.55mm, 60-degree minimum field of view, 5-inch minimum display with 854x480 pixel resolution, 4–8 feet probe length, 1920x1080 image resolution, and IP 67 waterproof rating. Combination infrared and probe thermometers must be Thermoworks IRT-2 with standard type T straight probe or equal, with infrared range −40 to 250 degrees Fahrenheit, infrared accuracy ±1.8 degrees Fahrenheit from 32 to 149 degrees, thermocouple probe range minimum 32 to 149 degrees Fahrenheit, and probe accuracy ±0.9 degrees Fahrenheit. Combustible gas meters must include carbon monoxide detection with resolution 1ppm or lower, range 0–2,000ppm or greater, and accuracy ±5ppm or 5% of reading (whichever is greater) or better. The solicitation was amended June 30, modifying paragraphs 3 and 7. Evaluation criteria and award value are not disclosed in the source. NAICS 334519, PSC 6625. All shipments are subject to FAR 52.225-1, 52.225-3, and DFARS 252.225-7001 Buy American provisions and may originate from multiple suppliers without consolidation. Delivery address is Walter Graves, AFCEC/CIMW, 3515 South General McMullen Drive, San Antonio, TX 78226.

Notice text

2 versions

Update #2 · Latest ·

Amended paragraph #3 & #7 on 30 June 2026 (see attachments)

1. Binoculars;     Quantity = 194

Make/Model: Fujinon 10x50, Steiner 10x50 Military Marine, or equivalent

Specifications for "Steinger Military Marine 10x50" (or equal) products:

  • Magnification: 10x
  • Objective Lens Diameter: No less than 50mm
  • Field of View: No less than 327 ft at 1000 yds
  • Focus: Auto Focus System
  • Optics: Fully coated high contrast optics
  • Close Focus: No more than 75 ft
  • IP Distance: 56-74mm
  • Diopter Range: +/- 5 pdt
  • Luminosity: No less than 25
  • Durability: Rubber Armoring (Rugged), Waterproof, Housing designed for minimum 8G impact
  • Includes: Objective Covers, Carrying Case, High Contrast, Neck Strap

2. Borescopes;     Quantity = 194

Make/Model: Teslong TD-500, Kentfaith Dual -Lens Articulating Borescope, or equivalent

Specifications for "Teslong TD-500" (or equal) products:

  • Camera Pixels: 1.0 Megapixel minimum
  • Probe: 2 Way Articulating Probe, 210 deg articulation, diameter no greater than 8.55 mm
  • Field of View: 60 degrees minimum
  • Display: 5 inch minimum, with a screen resolution of at least 854x480 pixels
  • Probe Length: Between 4 to 8 feet
  • Image Resolution: 1920x1080 pixel
  • Durability: IP 67 waterproof

3. Combination IR and Probe Thermometers;     Quantity = 194

Thermoworks IRT-2  with standard type T straight probe or equal.

  Minimum IR Range -40 to 250 deg F 
  Minimum IR accuracy +/- 1.8 deg F from 32 deg to 149 deg F

Thermocoupler (probe) specifications
   Minimum Range 32 deg F to 149 deg F minimum
   Minimum Accuracy +/- 0.9 deg F from 32 deg F to 149 deg F

Must include a type T straight Penetration Probe, standard tip

4. Combustible Gas Meters / Combustible Gas Leak Detection;     Quantity = 194

Make/Model: TPI 775, BPI Basics Kit, Gas Leak Detector CO Monitor, or equivalent

Specifications for "TPI 775 " (or equal) products:

Carbon Monoxide Detection:

  • Resolution: 1ppm or lower
  • Range: 0-2,000ppm or larger range
  • Accuracy: +/- 5ppm or 5% of reading (whichever is greater) or better

 Combustible Gas Leak Detection:

  • Resolution: <50ppm
  • Range: 0 – 50,000 ppm
  • Accuracy: +/- 10%
  • Detectable Gases: Must detect Natural Gas and Propane
  • Alarms: Audible alarm for leaks, adjustable gas upper alarm threshold limit for alarm to permit gas leak isolation

5. GFCI Testers;    Quantity = 194

Make/Model: Ideal 61-502 or equivalent

Specifications for "Ideal 61-502 120V AC Receptacle Tester" (or equal) product:

  • Certification: UL 1436 and CSA C22.2 no 160 listed
  • Detection Capabilities: Detects open ground, reverse polarity, open hot, open neutral, hot and ground reversed, and hot on neutral with hot open.
  • Functionality: Push to Test function to test operation of GFCI receptacles.

6. Water Pressure Testers;     Quantity = 194

Make/Model: Watts 3/4 Inch Plastic Water Pressure Test Guage, or equivalent

Specifications for "WATTS ¾ inch Plastic Water Pressure Test Gauge" (or equal)

  • Connection: ¾ inch FIP connection
  • Accuracy: ASME, type B
  • Working Pressure: 0-140 psi
  • Max Pressure: 200 psi

7. Thermal Imagers;     Quantity = 194

Thermal imager minmum specifications:

  • Thermal resolution:  160 x 120 pixels or greater
  • Thermal sensitivity: < 150 mK or lower
  • Field of View:  57 deg x 44 deg or higher
  • Temperature range:  32 deg F to 170 deg F or greater
  • Image modes: Thermal, Visual and mode that embosses visual details into thermal images

Digital camera minimum specifications

  • 2 MP or greater
  • 70deg x 55 deg minimum field of view
  • 320 x 240 pixel minimal color display

Built in Moisture Detection both pinless and external pin probes (in lieu of this the vender can provide a separate moisture meter)

  • Pinless depth to 0.75 inches
  • Pin probes provided for pin operation
  • Range 7% to 30% or greater with accuracy to +/- 1.5%
  • Range 30% to 100% with reference only accuracy

Built in Air Temperature, Relative Humidity and Dew Point sensors (in lieu of this the vender can provide a separate meter to measure temperature, relative humidity and dew point)

  • Temperature range:  32 deg F to 120 deg F or greater with minimum accuracy of +/- 1.1 deg F or better
  • Relative Humidity range: 10%-90% or greater/ accuracy +/- 2.5% or better
  • Dew Point -20 deg F to 120 Deg F or greater  with accuracy of +/- 1.8 Deg F or better
Update #1 ·

1. Binoculars;     Quantity = 194

Make/Model: Fujinon 10x50, Steiner 10x50 Military Marine, or equivalent

Specifications for "Steinger Military Marine 10x50" (or equal) products:

  • Magnification: 10x
  • Objective Lens Diameter: No less than 50mm
  • Field of View: No less than 327 ft at 1000 yds
  • Focus: Auto Focus System
  • Optics: Fully coated high contrast optics
  • Close Focus: No more than 75 ft
  • IP Distance: 56-74mm
  • Diopter Range: +/- 5 pdt
  • Luminosity: No less than 25
  • Durability: Rubber Armoring (Rugged), Waterproof, Housing designed for minimum 8G impact
  • Includes: Objective Covers, Carrying Case, High Contrast, Neck Strap

2. Borescopes;     Quantity = 194

Make/Model: Teslong TD-500, Kentfaith Dual -Lens Articulating Borescope, or equivalent

Specifications for "Teslong TD-500" (or equal) products:

  • Camera Pixels: 1.0 Megapixel minimum
  • Probe: 2 Way Articulating Probe, 210 deg articulation, diameter no greater than 8.55 mm
  • Field of View: 60 degrees minimum
  • Display: 5 inch minimum, with a screen resolution of at least 854x480 pixels
  • Probe Length: Between 4 to 8 feet
  • Image Resolution: 1920x1080 pixel
  • Durability: IP 67 waterproof

3. Thermal Imager;     Quantity = 194

Make/Model: FLIR MR277, Tripplet IRTC550 Thermal Imaging Camera, Protometer BLD5375, Fluke 971 Temperature Humidity Meter, or equivalent

4. Combustible Gas Meters / Combustible Gas Leak Detection;     Quantity = 194

Make/Model: TPI 775, BPI Basics Kit, Gas Leak Detector CO Monitor, or equivalent

Specifications for "TPI 775 " (or equal) products:

Carbon Monoxide Detection:

  • Resolution: 1ppm or lower
  • Range: 0-2,000ppm or larger range
  • Accuracy: +/- 5ppm or 5% of reading (whichever is greater) or better

 Combustible Gas Leak Detection:

  • Resolution: <50ppm
  • Range: 0 – 50,000 ppm
  • Accuracy: +/- 10%
  • Detectable Gases: Must detect Natural Gas and Propane
  • Alarms: Audible alarm for leaks, adjustable gas upper alarm threshold limit for alarm to permit gas leak isolation

5. GFCI Testers;    Quantity = 194

Make/Model: Ideal 61-502 or equivalent

Specifications for "Ideal 61-502 120V AC Receptacle Tester" (or equal) product:

  • Certification: UL 1436 and CSA C22.2 no 160 listed
  • Detection Capabilities: Detects open ground, reverse polarity, open hot, open neutral, hot and ground reversed, and hot on neutral with hot open.
  • Functionality: Push to Test function to test operation of GFCI receptacles.

6. Water Pressure Testers;     Quantity = 194

Make/Model: Watts 3/4 Inch Plastic Water Pressure Test Guage, or equivalent

Specifications for "WATTS ¾ inch Plastic Water Pressure Test Gauge" (or equal)

  • Connection: ¾ inch FIP connection
  • Accuracy: ASME, type B
  • Working Pressure: 0-140 psi
  • Max Pressure: 200 psi

7. IR Thermometers;     Quantity = 194

Make/Model: Thermoworks IRT-2 with Probe Kit, or equivalent

Specifications for an IR Thermometer and accompanying probe:

  • Product: Ideal 61-502 AC GFCI Receptacle Tester, 120 volt
  • Testing Conditions: open ground, reverse polarity, open hot, open neutral, hot and ground reversed, hot on neutral with open hot
  • Features: GFCI trip test button
  • Certifications: UL 1436 and CSA C22.2 no 160 listed
  • Thermocouple (probe) specifications:
    • Minimum Range: 32 deg F to 149 deg F
    • Accuracy: +/- 0.9 deg F from 32 deg F to 149 deg F
    • Probe Type: Must include a type T straight Penetration Probe, standard tip

Files

File Type Posted
Vendor Q and As for MHO194 MHO Inspection Kits.pdf PDF
Price Template.xlsx XLSX spreadsheet

Similar open opportunities

Opportunity Agency Set-aside Responses due
A27-022 Videoscope Tinker AFB, Oklahoma 73145, United States · NAICS 334519 Air Force Sustainment Center Total Small Business

See more similar opportunities on GovTribe

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity
Try for free Login