Metals Unit Plate Roller
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W912EQ23Q0052
- Agency
- ENDIST Memphis US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332313 Plate Work Manufacturing
- Place of performance
- Memphis, Tennessee 38109, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers Engineering District Memphis is seeking to procure one AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine or equivalent capable of rolling steel plates up to 3/4 inch thick and 4 feet wide to a 32-inch diameter. The machine must have a working length of 128 inches, 30 HP motor, and weigh approximately 92,400 pounds. Quotes will be evaluated based on technical acceptability of the product, satisfactory past performance, and price with a deadline of August 15, 2023 for responses.
This procurement is set aside for small businesses with less than 750 employees under NAICS 332710 and PSC 3440. The machine must be delivered by November 1, 2023 to 2915 Riverport Road in Memphis, Tennessee. Key details include a requirement to roll AR 400 steel plate up to 4 feet wide and specifications for roll diameter, length, height, width and weight of the machine.
Notice text
4 versions
Update #4 · Latest ·
This amendment is to remove the weight requirement from the plate rolling machine and extend the response due date to 01 September 2023 at 10am CST.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This combined synposis solicitation is being amended to change the response due date from Tuesday 15 August 2023 to Friday 18 August 2023 at 10am CST.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The Metals Unit located at Ensley Engineer Yard is purchasing one (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine or equivalent. Below are the specifications needed to fulfill the purchase:
One (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine with the following specifications:
- Induction hardened rolls
- Electronic parallelism
- Digital display
- Cone bending device
- Two speed control
- Separate control panel
- Drop-end controlled from control panel
- Movement and parallelism adjustment controlled from control panel
- Central rolls driven with hydraulic motor and reducer
- Working length: 128 inches
- Rated maximum thickness:
- At yield point: 36,000 PSI
- At pre-bending: 3/4-inch-thick mild steel
- Capable of rolling 3/8-inch-thick AR 400 steel plate by 4 feet wide to a 32-inch diameter
- Number of rolls: 4
- Motor power: 30 HP, 460v
- Rolling speed: up to 16 feet per minute
- Minimum rolling diameter: top roll diameter times 3
- Top roll diameter: 14.57 inches
- Pinch roll diameter: 14.17 inches
- Side roll diameter: 11.81 inches
- Machine length: 240 inches
- Machine height: 79 inches
- Machine width: 82 inches
- Machine weight: 92,400 pounds
Added Options Required:
- Variable speed of rotation
- Material feeding table
- Oil cooler system
- Central overhead support
- Side supports
- AK 400 CNC control CS6
- Training and on-site assistance with setup
- One year manufacturer’s warranty
Update #3 ·
This combined synposis solicitation is being amended to change the response due date from Tuesday 15 August 2023 to Friday 18 August 2023 at 10am CST.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The Metals Unit located at Ensley Engineer Yard is purchasing one (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine or equivalent. Below are the specifications needed to fulfill the purchase:
One (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine with the following specifications:
- Induction hardened rolls
- Electronic parallelism
- Digital display
- Cone bending device
- Two speed control
- Separate control panel
- Drop-end controlled from control panel
- Movement and parallelism adjustment controlled from control panel
- Central rolls driven with hydraulic motor and reducer
- Working length: 128 inches
- Rated maximum thickness:
- At yield point: 36,000 PSI
- At pre-bending: 3/4-inch-thick mild steel
- Capable of rolling 3/8-inch-thick AR 400 steel plate by 4 feet wide to a 32-inch diameter
- Number of rolls: 4
- Motor power: 30 HP, 460v
- Rolling speed: up to 16 feet per minute
- Minimum rolling diameter: top roll diameter times 3
- Top roll diameter: 14.57 inches
- Pinch roll diameter: 14.17 inches
- Side roll diameter: 11.81 inches
- Machine length: 240 inches
- Machine height: 79 inches
- Machine width: 82 inches
- Machine weight: 92,400 pounds
Added Options Required:
- Variable speed of rotation
- Material feeding table
- Oil cooler system
- Central overhead support
- Side supports
- AK 400 CNC control CS6
- Training and on-site assistance with setup
- One year manufacturer’s warranty
Update #2 ·
The Metals Unit located at Ensley Engineer Yard is purchasing one (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine or equivalent. Below are the specifications needed to fulfill the purchase:
One (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine with the following specifications:
- Induction hardened rolls
- Electronic parallelism
- Digital display
- Cone bending device
- Two speed control
- Separate control panel
- Drop-end controlled from control panel
- Movement and parallelism adjustment controlled from control panel
- Central rolls driven with hydraulic motor and reducer
- Working length: 128 inches
- Rated maximum thickness:
- At yield point: 36,000 PSI
- At pre-bending: 3/4-inch-thick mild steel
- Capable of rolling 3/8-inch-thick AR 400 steel plate by 4 feet wide to a 32-inch diameter
- Number of rolls: 4
- Motor power: 30 HP, 460v
- Rolling speed: up to 16 feet per minute
- Minimum rolling diameter: top roll diameter times 3
- Top roll diameter: 14.57 inches
- Pinch roll diameter: 14.17 inches
- Side roll diameter: 11.81 inches
- Machine length: 240 inches
- Machine height: 79 inches
- Machine width: 82 inches
- Machine weight: 92,400 pounds
Added Options Required:
- Variable speed of rotation
- Material feeding table
- Oil cooler system
- Central overhead support
- Side supports
- AK 400 CNC control CS6
- Training and on-site assistance with setup
- One year manufacturer’s warranty
Update #1 ·
The Metals Unit located at Ensley Engineer Yard is purchasing one (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine or equivalent. Below are the specifications needed to fulfill the purchase:
One (1) AHS-3220 Four-Roll Hydraulic Powered Plate Rolling Machine or equivalent with the following specifications:
- Working length: 128 inches
- Rated maximum thickness:
- At yield point: 36,000 PSI
- At pre-bending: 3/4-inch-thick mild steel
- Capable of rolling 3/8-inch-thick AR 400 steel plate by 4 feet wide to a 32-inch diameter
- Number of rolls: 4
- Motor power: 30 HP, 460v
- Rolling speed: up to 16 feet per minute
- Minimum rolling diameter: top roll diameter times 3
- Top roll diameter: 14.57 inches
- Pinch roll diameter: 14.17 inches
- Side roll diameter: 11.81 inches
- Machine length: 240 inches
- Machine height: 79 inches
- Machine width: 82 inches
- Machine weight: 92,400 pounds
Attachments
| File | Type | Posted |
|---|---|---|
| Metals Plate Roller SOW amendment.pdf | ||
| B04 - Combined Synopsis and Solicitation.pdf | ||
| Metals Plate Roller SOW.pdf | ||
| A02 - SOW Metals Unit Plate Plate.pdf | ||
| B04 - Combined Synopsis and Solicitation.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Metals Unit Plate Roller | Award Notice | |
| Metals Unit Plate Roller | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity