MBRNF Skid Steer Mower Arm Attachment
Awarded Award Notice Posted
- Solicitation number
- 1240LP24P0079
- Agency
- Forest Service Department of Agriculture
- Awarded
- to Outpost Industries LLC
- Set-aside
- Total Small Business
Opportunity facts
- Contract number
- 1240LP24P0079 Federal contract award
- NAICS code
- 333120 Construction Machinery Manufacturing
- PSC
- 3830 Truck And Tractor Attachments
- Place of performance
- Laramie, Wyoming 82070, United States
- Points of contact
-
- Bryan Reeves bryan.reeves@usda.gov
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of Agriculture Forest Service awarded a contract to Outpost Industries LLC for a hydraulically controlled swing arm mower attachment for a CAT 259B3 skid steer. The attachment will be used for roadside brushing, mowing grass, small trees, and tree branches to clear vegetation from road shoulders and ditches. The awarded contract is for $11,950 and the mower attachment has a nominal reach of 96 inches, a nominal cut width of 44 inches, and the capability to pivot vertically 125 degrees.
Notice text
Requirements
for
Skid Steer Mower Attachment
April 2024
The following requirements shall be met to provide a hydraulicly controlled swing arm mower attachment for skid steer. The unit will be used for roadside brushing to include mowing grass, small trees, and tree branches to clear vegetation from the road shoulder and ditch.
- The mower attachment shall be equipped to attach to a CAT 259B3 Skid Steer
- The mower attachment shall have the capability to swing 90 degrees horizontally from the center line of the skid steer (straight forward to right side of skid steer)
- Nominal Reach (center of arm pivot to center of cutter shaft/driven motor): 96” (+/- 8”)
- Nominal Cut Width: 44” (+/- 6”)
- The mower deck shall have the capability to pivot vertically at the end of the swing arm.
- Pivot angle between swing arm and deck: 125 degrees from vertical (+/- 10 degrees)
- The mower shall have cutters that have the capability to pivot or break away when hard objects are contacted.
- The cutters shall be replaceable.
- The cutters shall be constructed of steel with high tensile strength, hardness, abrasion and wear-resistant properties.
- The hydraulic motor on the mower shall be sized for the appropriate pressure and flow rates of the specified skid steer.
- The option for a hydraulic motor that requires the need of a case drain is acceptable.
Skid Steer Hydraulic Specifications: (CAT 259B3)
- Loader Hydraulic Flow: 22 gal/min
- Loader Hydraulic Pressure: 3,335 psi
- Hydraulic Power: 42.8 hp
Shipping Location:
US Forest Service, MBRTB
2468 Jackson Street
Laramie, WY 82070
Awarded contract 1240LP24P0079 to Outpost Industries LLC for 11950.00 on 2024-08-26.
Notice history
| Notice | Type | Posted |
|---|---|---|
| MBRNF Skid Steer Mower Arm Attachment | Award Notice | |
| MBRNF Skid Steer Mower Arm Attachment | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity