M777 Digital Fire Control Hardware
Closed Pre-Solicitation Posted
- Solicitation number
- W15QKN-25-X-13A2
- Agency
- ACC Picatinny Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332994 Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- PSC
- 1025 Guns, Over 150Mm Through 200Mm
- Place of performance
- United States
- Points of contact
-
- Klaudia A. Grabias klaudia.a.grabias.civ@army.mil (520) 669-7009
- Daniel Rakauskas daniel.s.rakauskas.civ@army.mil (520) 669-7965
Notice details come from SAM.gov. Updated .
About this opportunity
The Army Contracting Command New Jersey (ACC-NJ) at Picatinny Arsenal is conducting a market survey to identify potential sources for procuring M777 Digital Fire Control Hardware components. The procurement includes specific hardware items such as a Mission Computer 11 (MSC-11), Chief of Section Display 11 (CSD-11), and three types of cable assemblies. Vendors must provide a statement of capability, including program and configuration management plans, along with rough order magnitude schedules for qualification testing, first article testing, and cost estimates. The technical documentation for this procurement is classified as Distribution C and will require vendors to complete specific documentation, including a DD Form 2345, an AMSTA-AR Form 1350, and a Non-Disclosure Agreement. All interested sources are required to submit their capabilities electronically to Daniel Rakauskas no later than January 16, 2025, at 5:00 PM Eastern time, with electronic submissions being the only accepted method.
This sources sought notice is not a formal solicitation and does not guarantee a contract award, but indicates potential procurement of up to 800 units of each component. There are no specific set-aside designations for this opportunity, and it is open to all qualified vendors. The hardware must conform to specific performance specifications dated July 2024, and vendors are encouraged to submit designs even if not fully compliant to allow the government to assess available capabilities. While no specific award value is mentioned, the procurement involves critical military hardware for artillery and mortar systems. Vendors should be prepared to provide comprehensive quality assurance plans, acceptance procedures, and packaging details. The government emphasizes that all costs associated with developing response materials will be borne by the participating vendors, and no compensation will be provided for submitted information.
Notice text
3 versions
Update #3 · Latest ·
Purpose: The Army Contracting Command New Jersey (ACC-NJ), Picatinny Arsenal, NJ 07806-5000 is conducting a Market Survey on behalf of the Product Manager Artillery, Mortars, and Precision Systems (PdM AMPS) to identify potential sources for the procurement and delivery ofM777 Digital Fire Control Hardware listed in the table below. The Technical Documentation for this procurement is Distribution C. The below listed TDP documents may be provided upon request following receipt and approval of these signed and completed documents: (1) DD Form 2345 – Military Critical Technical Data Agreement; (2) AMSTA-AR Form 1350 – Technical Data Request Questionnaire; and (3) a Non-Disclosure Agreement (NDA). Requests shall be submitted to the POC for this opportunity.
Government Part Number Part Name Qty
-13100941 Mission Computer 11 (MSC-11) 1 EA
-13010942 Chief of Section Display 11 (CSD-11) 1 EA
-13107078 Cable Assembly, W112 1 EA
-13107079 Cable Assembly, W114 1 EA
-13107080 Cable Assembly, W116 1 EA
Description: This Sources Sought is for planning purposes only and shall not be construed as a solicitation or an obligation on the part of PdM-AMPS or ACC-NJ. The contractor shall be prepared to procure and deliver up to QTY 800 of each of the components listed in Table 1. The MSC11 and CSD11 shall be IAW Performance Specification 13100941 dated 19 July 2024 and Performance Specification 13100942 dated 4 July 2024 respectively. The W112, W114, and W116 shall be IAW with the drawing numbers listed in Table 1.
All interested vendors are requested to provide:
- Statement of capability describing the vendor’s capability to provide the items which shall include program and configuration management plans.
- Rough Order Magnitude Schedule for qualification testing IAW Performance Specifications if not from a Government approved source
- Rough Order Magnitude Schedule to provide supplies/services inclusive First Article Testing which shall include Quality Assurance plans
- Rough Order Magnitude Cost to provide supplies/services which shall include acceptance and packaging plans and procedures.
This is a SOURCES SOUGHT NOTICE (SSN) ONLY and should NOT be construed as a Request for Proposal (RFP) or any type of commitment by the United States Government. As stated above, please be aware that the Government will not pay for any information submitted under this announcement. As a result of this SOURCES SOUGHT NOTICE (SSN), a Request for Proposal (RFP) may be issued for M777 Digital Fire Control Hardware. Participation in this SOURCES SOUGHT NOTICE (SSN) is completely voluntary by the vendor and as such all costs to develop the vendor’s response are to be borne by the participating vendor.
Submissions of designs that are not fully compliant with all requirements are also encouraged so that PdM AMPS may assess the capabilities of all currently available sources. The Government recognizes that proprietary and/or classified data may be a part of this effort. If so, clearly mark such restricted/proprietary and classified data and present them as an addendum to the nonrestricted/non-proprietary and unclassified information.
All interested sources are encouraged to submit their abilities/capabilities No Later Than (NLT) Friday, 11 April 2025 1700 EASTERN. Interested sources shall submit their responses and inquiries pertaining to this announcement to the following POC(s) to: Daniel Rakauskas, ACC-NJ-IC Bldg. 10, Picatinny Arsenal, NJ 07806-5000; email: daniel.s.rakauskas.civ@army.mil
Electronic submittals are required. NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED.
03/31/2025--Please note, this is the final extension for this Sources Sought Notice. All submissions must be NLT the stated date above.
Update #2 ·
Purpose: The Army Contracting Command New Jersey (ACC-NJ), Picatinny Arsenal, NJ 07806-5000 is conducting a Market Survey on behalf of the Product Manager Artillery, Mortars, and Precision Systems (PdM AMPS) to identify potential sources for the procurement and delivery ofM777 Digital Fire Control Hardware listed in the table below. The Technical Documentation for this procurement is Distribution C. The below listed TDP documents may be provided upon request following receipt and approval of these signed and completed documents: (1) DD Form 2345 – Military Critical Technical Data Agreement; (2) AMSTA-AR Form 1350 – Technical Data Request Questionnaire; and (3) a Non-Disclosure Agreement (NDA). Requests shall be submitted to the POC for this opportunity.
Government Part Number Part Name Qty
-13100941 Mission Computer 11 (MSC-11) 1 EA
-13010942 Chief of Section Display 11 (CSD-11) 1 EA
-13107078 Cable Assembly, W112 1 EA
-13107079 Cable Assembly, W114 1 EA
-13107080 Cable Assembly, W116 1 EA
Description: This Sources Sought is for planning purposes only and shall not be construed as a solicitation or an obligation on the part of PdM-AMPS or ACC-NJ. The contractor shall be prepared to procure and deliver up to QTY 800 of each of the components listed in Table 1. The MSC11 and CSD11 shall be IAW Performance Specification 13100941 dated 19 July 2024 and Performance Specification 13100942 dated 4 July 2024 respectively. The W112, W114, and W116 shall be IAW with the drawing numbers listed in Table 1.
All interested vendors are requested to provide:
- Statement of capability describing the vendor’s capability to provide the items which shall include program and configuration management plans.
- Rough Order Magnitude Schedule for qualification testing IAW Performance Specifications if not from a Government approved source
- Rough Order Magnitude Schedule to provide supplies/services inclusive First Article Testing which shall include Quality Assurance plans
- Rough Order Magnitude Cost to provide supplies/services which shall include acceptance and packaging plans and procedures.
This is a SOURCES SOUGHT NOTICE (SSN) ONLY and should NOT be construed as a Request for Proposal (RFP) or any type of commitment by the United States Government. As stated above, please be aware that the Government will not pay for any information submitted under this announcement. As a result of this SOURCES SOUGHT NOTICE (SSN), a Request for Proposal (RFP) may be issued for M777 Digital Fire Control Hardware. Participation in this SOURCES SOUGHT NOTICE (SSN) is completely voluntary by the vendor and as such all costs to develop the vendor’s response are to be borne by the participating vendor.
Submissions of designs that are not fully compliant with all requirements are also encouraged so that PdM AMPS may assess the capabilities of all currently available sources. The Government recognizes that proprietary and/or classified data may be a part of this effort. If so, clearly mark such restricted/proprietary and classified data and present them as an addendum to the nonrestricted/non-proprietary and unclassified information.
All interested sources are encouraged to submit their abilities/capabilities No Later Than (NLT) Monday, 17 March 2025 1700 EASTERN. Interested sources shall submit their responses and inquiries pertaining to this announcement to the following POC(s) to: Daniel Rakauskas, ACC-NJ-IC Bldg. 10, Picatinny Arsenal, NJ 07806-5000; email: daniel.s.rakauskas.civ@army.mil
Electronic submittals are required. NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED.
Update #1 ·
Purpose: The Army Contracting Command New Jersey (ACC-NJ), Picatinny Arsenal, NJ 07806-5000 is conducting a Market Survey on behalf of the Product Manager Artillery, Mortars, and Precision Systems (PdM AMPS) to identify potential sources for the procurement and delivery ofM777 Digital Fire Control Hardware listed in the table below. The Technical Documentation for this procurement is Distribution C. The below listed TDP documents may be provided upon request following receipt and approval of these signed and completed documents: (1) DD Form 2345 – Military Critical Technical Data Agreement; (2) AMSTA-AR Form 1350 – Technical Data Request Questionnaire; and (3) a Non-Disclosure Agreement (NDA). Requests shall be submitted to the POC for this opportunity.
Government Part Number Part Name Qty
-13100941 Mission Computer 11 (MSC-11) 1 EA
-13010942 Chief of Section Display 11 (CSD-11) 1 EA
-13107078 Cable Assembly, W112 1 EA
-13107079 Cable Assembly, W114 1 EA
-13107080 Cable Assembly, W116 1 EA
Description: This Sources Sought is for planning purposes only and shall not be construed as a solicitation or an obligation on the part of PdM-AMPS or ACC-NJ. The contractor shall be prepared to procure and deliver up to QTY 800 of each of the components listed in Table 1. The MSC11 and CSD11 shall be IAW Performance Specification 13100941 dated 19 July 2024 and Performance Specification 13100942 dated 4 July 2024 respectively. The W112, W114, and W116 shall be IAW with the drawing numbers listed in Table 1.
All interested vendors are requested to provide:
- Statement of capability describing the vendor’s capability to provide the items which shall include program and configuration management plans.
- Rough Order Magnitude Schedule for qualification testing IAW Performance Specifications if not from a Government approved source
- Rough Order Magnitude Schedule to provide supplies/services inclusive First Article Testing which shall include Quality Assurance plans
- Rough Order Magnitude Cost to provide supplies/services which shall include acceptance and packaging plans and procedures.
This is a SOURCES SOUGHT NOTICE (SSN) ONLY and should NOT be construed as a Request for Proposal (RFP) or any type of commitment by the United States Government. As stated above, please be aware that the Government will not pay for any information submitted under this announcement. As a result of this SOURCES SOUGHT NOTICE (SSN), a Request for Proposal (RFP) may be issued for M777 Digital Fire Control Hardware. Participation in this SOURCES SOUGHT NOTICE (SSN) is completely voluntary by the vendor and as such all costs to develop the vendor’s response are to be borne by the participating vendor.
Submissions of designs that are not fully compliant with all requirements are also encouraged so that PdM AMPS may assess the capabilities of all currently available sources. The Government recognizes that proprietary and/or classified data may be a part of this effort. If so, clearly mark such restricted/proprietary and classified data and present them as an addendum to the nonrestricted/non-proprietary and unclassified information.
All interested sources are encouraged to submit their abilities/capabilities No Later Than (NLT) Thursday, 16 January 2025 1700 EASTERN. Interested sources shall submit their responses and inquiries pertaining to this announcement to the following POC(s) to: Daniel Rakauskas, ACC-NJ-IC Bldg. 10, Picatinny Arsenal, NJ 07806-5000; email: daniel.s.rakauskas.civ@army.mil
Electronic submittals are required. NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED.
Attachments
| File | Type | Posted |
|---|---|---|
| (2)_AMSTA-AR_Form_1350_TechDataReqQuestionnaire.pdf | ||
| W15QKN-25-X-13A2--Non_Disclosure--Non_Use_Agreement_(NDA).docx | DOCX document | |
| (1)_DD-2345__MILITARY_CRITICAL_TECHNICAL_DATA_AGREEMENT.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity