LTC for PARTS KIT, CONSTANT VELOCITY DRIVE SHAFT

Pre-Solicitation Posted

Solicitation number
SPE7LX24RX016
Agency
Responses due
Not on record
Set-aside
No set-aside

Opportunity facts

Notice details come from SAM.gov. Updated .

About this opportunity

The Defense Logistics Agency Land and Maritime is seeking to procure parts kits for constant velocity drive shafts through an Indefinite Delivery Contract (IDC) under FAR Part 13.5 Simplified Procedures for Certain Commercial Items. The solicitation will be available on May 29, 2024, and quotes are due prior to the closing date. The evaluation will consider a combination of price, delivery, past performance, and other factors. Contractors must have an approved U.S./Canada Joint Certification Program (JCP) certification and be approved by the DLA controlling authority to access the export-controlled technical data.

There is no set-aside designation for this procurement. The approved sources are GKN Driveline North America Inc. The estimated annual quantities are 530 and 600 units, with delivery timelines ranging from 112 to 300 days depending on the First Article Test requirement. The total duration of the contract, including option years, shall not exceed 5 years.

Notice text

RESPONSE DATE:  Quotes  are due prior to the Closing Date and Time specified on Page 1 of the Solicitation/Request for Quote (RFQ).

The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil on or about its estimated issue date of  5/29/2024.    Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS

The solicitation is for a long term (up to 5 years) Indefinite Delivery Contract (IDC) issued under FAR Part 13.5 Simplified Procedures for Certain Commercial Items.

NSN        ITEM     CAGE    Name     PART NUMBER

2520013828874  PARTS KIT, CONSTANT 62826   GKN DRIVELINE NORTH AMERICA INC.    12342974-3

2520013832387  PARTS KIT,CONSTANT  62826    GKN DRIVELINE NORTH AMERICA INC.    298-0107     

 Both NSN Items require Contractor First Article Test.

 Indefinite Quantities for delivery orders.  Estimated annual quantity is 530 each and 600 each respectively.

Unit of Issue:  EA

Destination Information:  Various DLA Stock locations

Delivery Schedule:  With FAT:  300 and 262 days respectively.  If FAT is waived:  180 and 112 days.

All responsible sources may submit an offer/quote which shall be considered.

The Small Business size standard is  1500 employees.

Item is procured in accordance with source controlled drawings and CAGE and Part Numbers listed above.  Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.

The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (base plus option years) shall not exceed 5 years. 

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data;  therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 3204(a)(1).  Approved sources are: 62826 GKN DRIVELINE NORTH AMERICA INC.

 

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

     This item has technical data some or all of which is subject to

     export-control of either the International Traffic in Arms regulations

     (ITAR) or the Export Administration Regulations (EAR), and cannot be

     exported without prior authorization from either the Department of State

     or the Department of Commerce. Export includes disclosure of technical

     data to foreign persons and nationals whether located in the United

     States or abroad. This requirement applies equally to foreign national

     employees and U.S. companies and their foreign subsidiaries. DFARS

     252.225-7048 is applicable to this data.

     The Defense Logistics Agency (DLA) limits distribution of export-control

     technical data to DLA contractors that have an approved US/Canada Joint

     Certification Program (JCP) certification, have completed the

     Introduction to Proper Handling of DOD Export-Controlled Technical Data

     Training and the DLA Export-Controlled Technical Data Questionnaire

     (both are available at the web address given below), and have been

     approved by the DLA controlling authority to access the

     export-controlled data. Instructions for obtaining access to the

     export-controlled data can be found at:

     https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

     To be eligible for award, offerors and any sources of supply proposed

     for use are required to have an approved JCP certification and have

     been approved by the DLA controlling authority to access

     export-controlled data managed by DLA. DLA will not delay award in

     order for an offeror or its supplier to apply for and receive approval

     by the DLA controlling authority to access the export-controlled data.

One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.

Forecast information is available to all potential sources.  The DLA Supplier Requirements Visibility Application (SRVA) is a database that is available via the DLA internet Bid Board System (DIBBS.)  SRVA provides potential sources the opportunity to search for information on DLA’s anticipated requirements based on updated monthly forecasts

      

Similar open opportunities

Opportunity Agency Set-aside Responses due
Drive shaft assembly, C NAICS 333613 Land and Maritime No set-aside
Parts kit, coupling, FLE NAICS 333612 Land and Maritime No set-aside
Parts kit, transverse C NAICS 336390 Land and Maritime No set-aside
Parts kit, mechanica NAICS 333613 Land and Maritime No set-aside
Parts kit, steering GEA NAICS 336330 Land and Maritime No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors