Lockport Waterproofing Machinery
Closed Solicitation Posted
- Solicitation number
- W912P624Q0011
- Agency
- ENDIST Chicago US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 561790 Other Services to Buildings and Dwellings
- PSC
- Z1AA Maintenance Of Office Buildings
- Points of contact
-
- Adam Haley adam.j.haley@usace.army.mil (312) 846-5494
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Corps of Engineers Engineering District Chicago is seeking a contractor to provide all labor, materials, equipment, and permits to seal, waterproof, and coat the interior of four (4) liftgate machinery pits at the Lockport Lock. The work includes fully cleaning and degreasing the interior surfaces prior to application of any sealants, fillers, or adhesives. The pits are approximately 20x20 ft, with a depth of 48 ft below surface grade, and have concrete walls at least 3 ft thick. Proposals are due by May 9, 2024.
This procurement is set aside for small businesses. The applicable NAICS code is likely 238320 (Painting and Wall Covering Contractors) and the PSC is likely C1520 (Painting, Coating, and Taping Services). There are no incumbent contractors named. The estimated contract value is not provided, but the work involves sealing and waterproofing four machinery pits. The work must be performed at the Lockport Lock site.
Notice text
The Contractor shall provide all labor, materials, equipment, and permits to seal, waterproof, and coat the interior of four (4) liftgate machinery pits at the Lockport Lock. The machinery pits are used to house cables, pulleys, hydraulic equipment to operate the lock?s gates. Due to cracks in the concrete, when the chamber is full, multiple leaks are present, allowing water to enter the pit. Due to the nature of equipment, there is grease and hydraulic fluid on the interior surfaces of the buildings. The surfaces must be fully cleaned and degreased prior to application of any sealants, fillers, or adhesives to not compromise adhesion. Portions of walls are obstructed by structural steel which shall be left undisturbed, however the conduit can be dismounted and moved as necessary to complete this Work. The pits are approximately 20x20 ft, with a depth of 48 ft below surface grade. The concrete wall thickness is at least 3 (three) ft depending on location.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Lockport Waterproofing Machinery | Solicitation | |
| W912P624Q0011 Lockport Machinery Waterproofing | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity