Lockport Hydraulic Power Unit
Closed Solicitation Posted
- Solicitation number
- W912P624Q0010
- Agency
- ENDIST Chicago US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 238210 Electrical Contractors and Other Wiring Installation Contractors
- Points of contact
-
- Adam Haley adam.j.haley@usace.army.mil (312) 846-5494
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Corps of Engineers Engineering District Chicago is seeking to procure a new Hydraulic Power Unit (HPU) to be used on the upstream lift gates for the Lockport facility. The HPU will enable the movement of the hydraulic cylinder during maintenance operations to disconnect the crosshead from the piston or move the piston without the crosshead connected, supporting the gate cables while the main hydraulic pump/system is not in use. The contract requires the HPU to operate at a hydraulic pressure of 1500-2000 psi, with a 250-gallon hydraulic cylinder, 20.86-inch bore, 8.66-inch rod, and 170-inch stroke. The pump must be 100 HP, with a 750-gallon reservoir, and a cycle time of 90-120 seconds per the operators. The solicitation has a due date of May 21, 2024.
This solicitation is not set aside for any specific designation. The contract does not mention any potential incumbents or current contractors. The value or budget range for the contract is not provided. The contract requires the installation of the necessary components and setup for the HPU on both the east and west sides of the upstream lift gates at the Lockport facility.
Notice text
The new HPU will be used on the upstream lift gates to move the hydraulic cylinder during maintenance operations to disconnect the crosshead from the piston or move the piston without the crosshead connected, which supports the gate cables while the main hydraulic pump/system is not in use. The necessary components and setup for the HPU will be installed to the hydraulics system at both sides of the upstream lift gates. Hydraulic operating pressure 1500-2000 psi, ~250 gallon hydraulic cylinder, bore 20.86 in diameter, rod 8.66 in diameter, stroke 170 in., cycle time 90-120 seconds (per the operators), 100 HP pump, 750 gallon reservoir. This hydraulic system is the same on both sides of the Lock (East and West) for both sets of gates.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Lockport Hydraulic Power Unit | Solicitation | |
| W912P624Q0010 Lockport Lock Portable Hydraulic Power Unit | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity