KC-130J ALR-69A Radar Warning Receiver (RWR) Integration

Closed Pre-Solicitation Posted

Solicitation number
N00019-26-RFPREQ-APM207-0821
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Forecast
KC130J Avionics: RWR A Kit Risk Reduction Federal forecast
Place of performance
Patuxent River, Maryland, United States

Notice details come from SAM.gov. Updated .

About this opportunity

Naval Air Systems Command (NAVAIR) is conducting market research to identify sources capable of performing non-recurring engineering, materiel procurement, manufacturing, and systems integration for the ALR-69A Radar Warning Receiver "A" Kit on the KC-130J aircraft, with responses due July 17, 2026. This is a sources-sought notice under FAR Part 10 for planning and market research purposes only and does not constitute a commitment to issue an RFP.

The scope requires the contractor to procure and fabricate two complete KC-130J ALR-69A "A" Kits including structural mounts, cabling, and C-J band antennas; conduct comprehensive non-recurring engineering to interface the ALR-69A with existing KC-130J avionics, power, and cooling architectures without system degradation; and execute one physical aircraft installation with engineering support for ground and flight testing. Installation and testing will occur at Naval Air Station Patuxent River, Maryland. The "B" Kit (Line Replaceable Units) will be provided as government-furnished equipment. The effort supports an electronic warfare and threat detection capability upgrade on the KC-130J platform. NAVAIR will not reimburse respondents for participation expenses. The notice is categorized under NAICS 336413 (Other Aircraft Parts and Auxiliary Equipment Manufacturing) and PSC 5841 (Radar Equipment, Airborne).

Notice text

1.0 Introduction

The Naval Air Systems Command (NAVAIR) is conducting market research to identify potential sources capable of performing Non-Recurring Engineering (NRE), materiel procurement, manufacturing, and systems integration for the ALR-69A Radar Warning Receiver (RWR) “A” Kit on the KC-130J aircraft.  Subsequently, the installation of the system onboard a single, KC-130J aircraft is desired by the source.

This sources sought is being used as a market research tool pursuant to Federal Acquisition Regulations (FAR) Part 10 to determine potential sources and their technical capabilities. The result of this market research will contribute to determining the method of procurement. This notice is issued solely for informational and planning purposes and does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. Only interested firms who believe they are capable and can meet the requirements of providing the supplies and services noted above are invited to respond to this notice. NAVAIR will not reimburse any respondents for any expenses associated with their participation in this Market Survey.

2.0 Background and Scope

The Government has a requirement to upgrade the electronic warfare and threat detection capabilities of the KC-130J. The scope of this effort requires the contractor to perform the following:

Kit Manufacturing

Procure and fabricate two (2) complete KC-130J ALR-69A “A” Kits (including structural mounts, cabling, and C–J band antennas). The “B” Kit (Line Replaceable Units) will be provided as Government Furnished Equipment (GFE).

Engineering Integration

Conduct comprehensive NRE to interface the ALR-69A with existing KC-130J avionics, power, and cooling architectures without degrading existing systems.

Installation & Test

Execute one (1) physical aircraft installation and provide engineering support for ground and flight testing at Naval Air Station (NAS) Patuxent River, MD.

Airworthiness & Data

Develop a Level 2 Developmental Technical Data Package (TDP), a Draft Technical Directive, and comprehensive airworthiness artifacts (Electrical Load Analysis, Structural Substantiation, Weight and Balance, RF Cosite Analysis, and System Safety Risk Assessment).

3.0 Submission Instructions

Interested parties possessing the requisite capabilities, facilities, and required engineering expertise are invited to submit a Capability Statement (no more than 10 pages). The statement must detail the vendor’s ability to execute the specific tasks outlined above, including proof of experience with KC-130J avionics integration and generating NAVAIR-approved airworthiness artifacts. The capabilities statement shall include the following: 

3.1 Corporate Information

1. Company's name and address.

2. Company’s cage code and Unique Entity Identifier (UEI) number.

3. Company point of contact including email address and phone number.

4. Company's business size and list of North American Industry Classification system (NAICS) codes under which goods and services are provided.

5. Company’s business status (Socio-Economic Factors: 8(a), HUBZone, Service-Disabled Veteran-Owned Business, etc.)

3.2 Specific Sources Sought Information Requested

1. Previous or current experience with avionics system integration, including but not limited to fiber optic cabling, Radio Frequency (RF) technology, and other defensive systems.

2. Previous or current experience with the C-130 platform, regardless of type and model.

3. Ability to access aircraft drawings from either the C-130 Fleet Support Team (FST) or the Original Equipment Manufacturer (OEM).

4. Previous or current experience with integration of systems in which the Line Replaceable Units (LRUs) are being produced by a separate OEM and provided as Government Furnished Equipment (GFE).

5. Previous or current experience providing Test and Evaluation (T&E) support either on site or remotely.

6. Ability for personnel to access United States government military installations, unescorted, with a current Common Access Card (CAC).  If personnel do not currently possess a CAC, they must have the ability to obtain one.

4.0 RESPONSES

Inquiries regarding this Sources Sought shall be addressed to Ms. Stephanie Savage at stephanie.r.savage2.civ@us.navy.mil and Mr. Shawn Campbell at shawn.campbell.civ@us.navy.mil

Email all information in response to this Sources Sought to Ms. Stephanie Savage at stephanie.r.savage2.civ@us.navy.mil and Mr. Shawn Campbell at shawn.campbell.civ@us.navy.mil Responses are due by 5:00 ET on 17 July 2026.

Similar open opportunities

Opportunity Agency Set-aside Responses due
Engineering and technical support for AN/APG-65 and AN/APG-79 Active Electronically Scanned Array (AESA) radars El Segundo, California, United States · NAICS 336411 Naval Air Systems Command No set-aside
Mode5/TCAS/Surveillance Cloaking Capability Patuxent River, Maryland, United States · NAICS 488190 Naval Air Systems Command No set-aside
F/A-18E/F Infrared Search and Track (IRST) Block II System Surrogate Aft Electronics Assemblies in support of Navy Operational Test Program Sets (OTPS) Orlando, Florida, United States · NAICS 336413 Naval Air Systems Command No set-aside
MH-60R Airborne Low Frequency Sonar (ALFS) Weapon Replaceable Assemblies (WRA) Support and Sustainment Clarksburg, Maryland, United States · NAICS 334511 Naval Air Systems Command No set-aside
N0038327QN144 NAICS 336413 Naval Supply Systems Command No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors