JB Charleston NPTU Machine Shop Maintenance – Accurpress Machines
Closed Pre-Solicitation Posted
- Solicitation number
- 08082024JBCHSNPTU
- Agency
-
Air Mobility Command
Air Force, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Charleston AFB, South Carolina, United States
Notice details come from SAM.gov. Updated .
About this opportunity
Paragraph 1:
The Department of the Air Force Air Mobility Command seeks a contractor to provide Performance Assurance (PA) and Comprehensive Calibration Analysis for two Accurpress machines used by NPTU Repair at Joint Base Charleston, South Carolina. The vendor must comply with all federal, state, and local laws and regulations, including OSHA and hazmat safety requirements. Interested parties should respond by August 14, 2024, providing company information, capability statements, and answers to questions regarding small business status, disadvantaged business certification, HUBZone certification, and veteran-owned or woman-owned status.
Paragraph 2:
This is a total small business set-aside opportunity. The current incumbent or contractor is not specified. The government is seeking responses from all qualified small business sources but has not provided any estimated award value or budget information. The contract will require annual service for the two Accurpress machines at Joint Base Charleston.
Notice text
THIS IS NOT A SOLICITATION ANNOUNCEMENT. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY. THE PURPOSE OF THIS ANNOUNCEMENT IS MARKET RESEARCH ONLY. RESPONSES TO THIS ANNOUNCEMENT WILL BE USED BY THE GOVERNMENT TO MAKE APPROPRIATE ACQUISITION DECISIONS. A SUBSEQUENT SOLICITATION ANNOUNCEMENT MAY FOLLOW. RESPONSES TO THIS ANNOUNCEMENT WILL NOT BE CONSIDERED AS AN ADEQUATE RESPONSE TO ANY FUTURE ANNOUNCEMENT.
Joint Base Charleston (JB CHS), located in Charleston, SC seeks a contractor to provide Performance Assurance (PA) and Comprehensive Calibration Analysis for two (2) Accurpress machines used by NPTU Repair, Joint Base Charleston, South Carolina. The table below outlines the manufacturer information of the two machines that will require PA by factory trained technicians.
Manufacturer: Accurpress
Model Numbers: 65008 and 7 40010
Serial Numbers: 7093 and 12889
Service Periodicity: Annual (Once a year)
The vendor shall be responsible for performing all work under this contract in accordance with all Federal, State, County, City laws and codes, and follow the more stringent of them. In addition to compliance with these laws, the Contractor shall follow all applicable standard industry practices including, but not limited to: Occupational Safety and Health Act (OSHA), Security, Hazmat and Safety.
The government is seeking responses from all qualified sources. Those wishing to identify their capability to provide the aforementioned product/services to any or all of the required locations should respond to this announcement via email to tatyana.verenich@us.af.mil no later than Wednesday, 14 Aug 2024 at 2:00 PM Eastern Standard Time. Interested parties should provide the following: Company Name, Company Address, Point of Contact, phone number, email address, CAGE number, and capability statement for the services provided as stated above. Additionally provide answers to the following questions: (1) Is your business small or large, (2) If small, does your firm qualify as a small disadvantaged business?, (3) If disadvantaged, specify under which disadvantaged group and if your firm is certified under Section 8(a) of the Small Business Act, (4) Is your firm a certified HUBZone firm, (5) Is your firm woman-owned or operated business, (6) Is your firm a certified Service-Disabled, Veteran-Owned Small Business or Veteran-Owned Small Business?
THIS REQUEST FOR INFORMATION OR "SOURCES SOUGHT" SHALL NOT BE CONSTRUED AS A REQUEST FOR PROPOSAL. INFORMATION IS TO BE PROVIDED ON A VOLUNTARY BASIS. NO ENTITLEMENT TO PAYMENT OF DIRECT OR INDIRECT COSTS OR CHARGES INCLUDING POSTAGE AND SHIPPING WILL ARISE AS A RESULT OF THE SUBMISSION OF INFORMATION.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Metal Forming Press Preventative Maintenance, Emergency Repairs and Parts | ACC Warren | No set-aside | |
| Preventative Maintenance and Repairs | ACC Warren | No set-aside | |
| Equipment Operations, Maintenance, and Repair Services at Joint Base Pearl harbor Hickam, Hawaii (JBPHH). | Naval Facilities Engineering Command | Total Small Business | |
| REFURBISH FORGE HAMMERS: Prep. Machine, Weld, Finish Machine 12ea G5391 & 12ea G5392 Rotary Forge Hammers for U.S. Army Watervliet Arsenal (WVA), NY. | ACC Warren | Total Small Business | |
| AF36 PM and ER | ACC Warren | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity