IPNF, CdA River RD, Sissons Bridge Rehabilitation

Added: Jun 05, 2017 1:44 pm This combination Synopsis/Sources Sought announcement is to determine interest from 8A, HUBZone, Women Owned Small Business, Service Disabled Veteran Owned Small Business (SDVOB), or Small Business firms under NAICS 237310 Highway Street and Bridge Construction, that will submit an offer to complete this project located at Coeur d Alene River Ranger District, Idaho Panhandle National Forests, Shoshone County, Idaho. This project is the rehabilitation of an existing 270 ft two lane concrete bridge. Work consists of but is not limited to structural concrete repair, furnishing and installing reinforcing steel, drill and epoxy, reinforcing steel, forming and placing structural concrete. Some unique aspects to this project, see FSSS725 attached and All concrete shall be high early strength class A(AE) concrete, fc=4000 PSI at 3 days, concrete shall be air entrained per specs. Concrete mix design may utilize self consolidating concrete or reduced maximum aggregate size concrete. Contractor shall submit mix design and test data showing compressive strength of mix at 3 days to engineer for approval. All non-prestressed reinforcing steel shall be of the deformed bar type conforming to AASHTO M31 (ASTM A615) GRADE 60. Concrete clear cover shall be 2 inch unless shown otherwise. Bending and splicing of reinforcement shall be in accordance with ACI318, design and shop drawings required for approval. All concrete formwork to be supported by hangers from bridge deck. Anchored forms to existing concrete girders or a combination thereof. All epoxy or expansion anchors to be SS316 if left in place or holes filled with epoxy grout. Any holes or anchors placed in existing concrete require location of existing reinforcing with non-destructive locating. Contractor will be required to submit stamped and signed formwork design. The bridge is located on FS Road 208 at milepost 9.5. The legal description is SW ¼ Section 30, T51N, R4E, BM. Estimated start work is October 2017 and complete by October 2018. In accordance with FAR Subpart 36.204, the estimated price range is between $250,000 and $500,000. Responses to this notice will be used to determine set-aside. Contractors who have experience in this specific type of work and intend to submit a proposal are requested to submit a response via FAX (208) 765-7229 or Email rloper@fs.fed.us to this Sources Sought notice with their information by 4:00 p.m. (pacific), Monday June 12, 2017. Responses must include 1) Name of Firm and DUNS number; 2) a positive statement of your intention to submit a proposal for the solicitation; 3) a clear description of experience performing work unique to this project; and 4) your 8A, HUBZone; SDVOB; WOSB or Small Business eligibility as determined by the NAICS size standards, the Small Business Administration (SBA) and registration in SAM. A solicitation will be issued on or around June 26, 2014.