Intake Gate Machinery Rehabilitation, Norfork Powerplant
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from , or the latest solicitation from .
- Solicitation number
- W9127S20R0004
- Agency
-
ENDIST Little Rock
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Norfork AR 72658 USA
Notice details come from SAM.gov. Updated .
About this opportunity
This pre-solicitation notice is for the replacement of intake gate machinery and erection equipment at the Norfork Powerplant located on Norfork Lake for the U.S. Army Corps of Engineers Little Rock District. The scope of work includes providing complete intake gate units, drives, controls, and all necessary equipment for a fully operable system. Proposals will be evaluated using Best Value Tradeoff and the resulting contract will be firm-fixed-price. The solicitation number W9127S20R0004 will be issued on June 29, 2020 via beta.SAM.gov and amendments will also be posted there. All questions must be submitted to the Contract Specialist Sarah Hagood by email or phone by June 29.
There is no set-aside designated for this procurement. It is classified under NAICS code 811310 for commercial and industrial machinery repair and maintenance with a small business size standard of $8 million. The magnitude of construction is estimated between $1 million to $5 million to replace the intake gates on units 1 and 2. All contractors must be registered in the System for Award Management to receive an award.
Notice text
PRE-SOLICITATION NOTICE
INTAKE GATE MACHINERY REHABILITATION
NORFORK LAKE, DAM, & POWER PLANT
MOUNTAIN HOME PROJECT OFFICE
U.S. ARMY CORPS OF ENGINEERS (USACE)
W9127S20R0004, Intake Gate Machinery Rehabilitation, will be advertised as Full and Open Competition under the North American Industrial Classification System (NAICS) Code 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The small business size standard is set at $8,000,000.00.
This solicitation will be issued, utilizing FAR Part 15, as a Request for Proposals (RFP). Proposals will be evaluated via the Best Value- Trade Off method, and will result in a firm fixed-price construction contract. The Magnitude of Construction is between $1,000,000.00 and $5,000,000.00.
The general scope of work is to replace Unit 1 and Unit 2 intake gate machinery and erection equipment, along with any incidental related work. The contractor shall provide complete units including base supports, geared drives, brakes, motors, heaters, shafts, bearings, wire rope, electrical equipment, local and remote indication and controls, covers, guards, gate erection supports, lifting beam, machinery bases and other necessary items to provide a complete and operable system. Provide all new internal wiring to the hydraulic board in the control room associated with the head-gate controls and indication. In the control circuit, provide the ability to stop lowering of the head-gate if for some reason the wrong head-gate was given a command to lower.
W9127S20R0004 will be issued on or about Monday, June 29, 2020, via the Government Point of Entry (GPE), Beta.SAM.gov. Amendments to the solicitation will be issued via the GPE as well. It is each offeror’s responsibility to download the solicitation and monitor the site for updates. Contractors may view and/or download this solicitation, its attachments, and any amendments after issuance by following the directions below:
Navigate to www.beta.sam.gov; search for W9127S20R0004
Offerors must be registered with the System for Award Management (SAM) in order to receive a Government contract award. Contractors may register for SAM at no cost to them at the following website: www.sam.gov.
The Contract Specialist for this solicitation will be Sarah Hagood. All questions/comments should be forwarded in writing to sarah.n.hagood@usace.army.mil or 501-324-5196.
All contractors are encouraged to visit Beta.SAM at www.beta.sam.gov to view other business opportunities.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Intake Gate Machinery Rehabilitation, Norfork Lake, Dam, & Powerhouse | Award Notice | |
| Intake Gate Machinery Rehabilitation, Norfork Lake, Dam, & Powerhouse | Solicitation | |
| This notice | Pre-Solicitation | |
| Intake Gate Machinery Rehabilitation, Norfork Powerplant | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Tenkiller Hydropower Excitation System Replacement | ENDIST Tulsa | No set-aside | |
| Webbers Falls U1 Speed Increaser Gearbox Replacement | ENDIST Tulsa | No set-aside | |
| Dike B Generator Installation, Mansfield Hollow Dam, Mansfield Center, CT | ENDIST New England | Total Small Business | |
| LLA Navigation Lock Switchgear | ENDIST Walla Walla | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity