Installation of washer and dryer

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (https://www.neco.navy.mil/).

This solicitation document supersedes prior solicitation N00244-16-T-0125.



The RFQ number is N00244-16-T-0136. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-87 and DFARS Publication Notice 20160325. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/far/ and http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. The NAICS code is 238210 and the Small Business Standard is $15M. The proposed contract is unrestricted. The Small Business Office concurs with unrestricted.



The NAVSUP Fleet Logistics Center San Diego requests responses from qualified sources capable of providing:



CLIN 0001- Installation Washer and Dryer AUTHORIZED INSTALLER ONLY





Period of Performance:

09 May 2016 31 August 2016

DELIVERY TERMS: FOB Destination

Place of Performance: Work is to be performed USS Pearl Harbor (LSD-52)

Performance Work Statement

Installation of Washer and Dryer

For

USS PEARL HARBOR (LSD-52)



1. SCOPE:

1.1 Title: Laundry Washer/Extractor and Dryer; replace

1.2 Location of Work:

1.2.1 Laundry Room (2-382-0-Q)

1.3 Equipment to be installed:

Quantity (2 EA), GFM Washer Extractor, 100 lb., Model: M50TDE,

MFR: EDRO Corporation, NSN: 3510-01-317-0968

Quantity (3 EA), GFM Laundry Dryer, Model: DW10000NSWE-243, MFR:

EDRO Corporation, NSN: 3510-01-450-2942

2. REFERENCES:

2.1 NAVSEA Standard Items 2016

2.2 S6162-BS-MMC-010/12489 Technical Manual for 100 Lb Laundry Dryer

2.3 S6162-CF-MMA-010/01551 Rev 3, EDRO DynaWash Washer-Extractors 100 Lb Capacity

2.4 MIL-STD-2003 Electric Plant Installation Standard Methods for

Surface Ships and Submarines

2.5 MIL-STD-1310, Shipboard Bonding, Grounding and Other Techniques for

Electromagnetic Compatibility and Safety

3. REQUIREMENTS:

3.1 Accomplish the requirements of 009-90 of 2.1. (See para. 5.4)

3.1.1 Contractor shall provide the services of a qualified technical representative to

disassemble/assemble and assist with installation and testing of new GFM laundry equipment,

as listed in 1.3.

3.2 Disconnect electrically and mechanically and remove existing (3 EA)

dryers, (2 EA) washers located in 1.2.1, and listed in 1.3, using 2.2

through 2.5 for guidance. Record electrical hookup data.

3.2.1 Matchmark, identify, and retain chocks, shims, shock mounts,

ground straps, and dampening pads

3.2.2 Retain hardware for reuse.

3.2.3 The contractor shall dispose of removed laundry equipment. (scrap)

(V)(G) VISUAL INSPECTION

3.3 Accomplish a visual inspection of the existing foundations and deck

area underneath removed laundry equipment listed in 1.3 for structural

integrity, deterioration, holes, pitting, corrosion and areas of damage

or distortion.

3.3.1 Submit one legible copy, in hard copy or approved transferrable media, of a report listing results of the requirements of 3.3 to the SUPERVISOR.

3.4 Ships Force to Accomplish the requirements of 009-32 of 2.1, including Table 3,

Line 26, Columns A, B and E for preservation of existing equipment

foundations and deck area underneath removed laundry equipment listed in

1.3, located in 1.2.1 as required.

Ships force to provide 110V, 440V electrical, LP air, ventilation, temp lighting, gas free services, hot work chits, fire watches, crane and fork lift services from pier to ship.

3.5 Contractor shall install new laundry equipment provided in 5.1 in accordance with 2.2, 2.3, 2.4 and

2.5 and data recorded in 3.2 for guidance and retained material from 3.2.1 and 3.2.2 as applicable

Including ventilation.

Contractor shall disassemble old machines in space, move to weather deck for crane service to pier. Disassemble new machines on weather deck, provide rigging services and move parts to space and reassemble. Contractor shall obtain WAF authorization forms as required.

3.5.1 Contractor shall align the piping and ventilation to each washer/extractor and Dryers

1.3. Piping and ventilation shall be supported independently and shall not impose a

strain on the equipment.

3.5.2 Install new fasteners conforming to MIL-DTL-1222, Type III,

Grade 5, and self-locking nuts conforming to MIL-DTL-32258, Steel.

Fasteners shall have protective coating per MIL-C-81751, Type I,

Class 4; Class 3; MIL-C-83488, Type II, Class 3, or ASTM B-633 , Type

II, Class 13.

3.5.3 Mechanically and electrically connect laundry equipment, using

hook-up data obtained from 3.2, using 2.2, 2.3 and 2.4 for guidance.

3.5.4 Bond and ground equipment in accordance with 2.5. MIL-STD-1310

3.6 Visually inspect system for evidence of external leakage.

Allowable external leakage: None.

(V)(G) OPERATIONAL TEST

3.7 Accomplish an operational test and verify each electrical device and

component installed, operate in conformance to the technical manual

furnished with each new washer and dryer.

3.8 Accomplish the requirements of 009-11 of 2.1 NAVSEA Standard Items 2016 for new and disturbed

insulation/lagging.

3.9 Ships Force to Accomplish the requirements of 009-32 of 2.1 for new and disturbed

surfaces.

4. NOTES:

4.1 New laundry equipment is hatchable. No access cuts required.

Interference includes removal of ladder well.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

Quantity (2 EA), GFM Washer Extractor, 100 lb., Model: M50TDE,

MFR: EDRO Corporation, NSN: 3510-01-317-0968

Quantity (3 EA), GFM Laundry Dryer, Model: DW10000NSWE-243,

MFR: EDRO Corporation, NSN: 3510-01-450-2942



EMCRA





CONTRACTOR MANPOWER REPORTING LANGUAGE FOR

CONTRACT PERFORMANCE WORK STATEMENTS

and Related Background Information





The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the USS Pearl Harbor (LSD-52) via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities;

(3) Y, Construction of Structures and Facilities;

(4) S, Utilities ONLY;

(5) V, Freight and Shipping ONLY.

The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil.

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.



The following FAR provision and clauses are applicable to this procurement:

52.204-7 System for Award Management

52.212-1 Instructions to Offerors - Commercial Items

52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items;

52.212-4 Contract Terms and Conditions - Commercial Items

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial

Items [Applicable clauses: 52.204-10; 52.209-6; 52.209-10; 52.219-28; 52.222-3; 52.222-19; 52.222-21; 52.222-26; 52.222-35; 52.222-41; 52.222-48; 52.222-53; 52.223-18; 52.225-13; 52.232-33].

52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended,

or Proposed for Debarment

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations

52.222-19 Child LaborCooperation with Authorities and Remedies

52.222-21 Prohibition of Segregated Facilities

52.222-35 Equal Opportunity for Veterans

52.222-36 Affirmative Action for Workers with Disabilities

52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-18 Availability of Funds

52.239-1 Privacy or Security Safeguards

52.247-34 F.o.b. Destination

52.252-1 -- Solicitation Provisions Incorporated by Reference

52.252-2 -- Clauses Incorporated by Reference

52.222-42Statement of Equivalent Rates for Federal Hires

52.232-36-Payment by Third Party

52.222-55-Minimum Wages Under Executive Order 13658

WAGE DETERMINATION

WD 15-5635 (Rev.-1) was first posted on www.wdol.gov on 03/15/2016 applies



Quoters [are reminded to include] a completed copy of 52.212-3 and its ALT I with quotes. All clauses shall be incorporated by reference in the order. Additional contract terms and conditions applicable to this procurement are:

252.203-7000 Requirements Relating To Compensation of Former DoD Officials

252.203-7005 Representation Relating To Compensation of Former DoD Officials

252.203-7996 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (Deviation)

252.203-7997 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (Deviation)

252.204-7003 Control of Government Personnel Work Product (APR 1992)

252.204-7011 Alternative Line Item Structure

252.204-7012 Safeguarding of Unclassified Controlled Technical Information

252.204-7015 Disclosure of Information To Litigation Support Contractors

252.232-7010 Levies On Contract Payments

252.244-7000 Subcontracts For Commercial Items And Commercial Components (DoD Contracts)



FAR 52.212-2, Evaluation - Commercial Items is applicable to this procurement.

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers.



(i) TECHNICAL CAPABILITY OF THE ITEM TO MEET THE GOVERNMENT REQUIREMENT

(ii) PAST PERFORMANCE

(iii) PRICE



Factor (i) Technical Capability. Offerors proposals will be evaluated first under Factor (i) above, which represents MINIMUM acceptable criteria. Under this factor, products offered will be determined to be either technically acceptable or unacceptable. A will comply statement without accompanying technical specifications of services being offered is automatic failure under this factor. Failure to meet the minimum criteria may render the offer to be technically unacceptable and may be eliminated for consideration for award.

Technical Criteria: Offeror must be an authorized distributor of the manufacturer- (EDRO Corp., U.S.A); provide proof.



Only those Offers which meet the minimum requirements established by Factor (i) as delineated in the will be further evaluated under Factors (ii).



Factor (ii) Past Performance- Format provided by Attachment 1



Past Performance Acceptable/Unacceptable Rating Method

Adjectival Rating



Acceptable



Description Based on the offerors performance record, the Government has a

reasonable expectation that the offeror will successfully perform

the required effort, or the offerors performance record is

unknown.



Unacceptable

Description Based on the offerors performance record, the Government does

not have a reasonable expectation that the offeror will be able to

successfully perform the required effort.



Sources are as follows:

Past performance information may be provided by the offeror, as solicited.

Past performance information may be obtained from questionnaires tailored to the

circumstances of the acquisition.

Past performance information may be obtained from established systems such as the

Past Performance Information Retrieval System (PPIRS), Federal Awardee

Performance and Integrity Information System (FAPIIS), Electronic Subcontract

Reporting System (eSRS), or other databases; and may be obtained from other

sources available to the Government, such as the Defense Contract Management

Agency; and interviews with Program Managers, Contracting Officers, Fee

Determining Officials.



The past performance evaluation team will review this past performance information and

determine the quality and usefulness as it applies to performance confidence assessment.



Factor (iii) Price A Firm Fixed Price contract award will be made to offeror whose offer is determined to be the lowest priced technically acceptable offer. Price analysis, if needed, will be used to determine the total evaluated price to support the selection of the lowest priced, technically acceptable offer.





This announcement will close at 11:45 am PST on 5 May 2016. Contact Leliza G. Sarino who can be reached at 619-556-7742 or email leliza.sarino@navy.mil using subject line: RFQ N00244-16-T-0136 Installation Washer and Dryer. A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency.





System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/.



All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Quotes over 10 pages in total will not be accepted by facsimile. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.



******* End of Combined Synopsis/Solicitation ********