Installation of Thrust Bearing Coolers and Turbine Repairs, Big Bend SD

Federal Business Opportunities Information

Date: 2013 October 21

SOLICITATION NO. W9128F-14-B-0003

On or about 15 November 2013, this office will issue Invitations for Bid for construction of the Turbine Rehab: Thrust Bearing Oil Cooler Installation, Thrust Bearing High Pressure Lift System Rehab and Shaft Sleeve Installation, Big Bend Powerhouse, Fort Thompson, SD. The solicitation will close 20 Feb 2014.

This solicitation is RESTRICTED TO SMALL BUSINESS PARTICIPATION.

Contractors interested in inspecting the site of the proposed work should contact Tom Stiver at 605-245-2331 ext 3003 or Gabe Mohnen at 605-245-2331 X 3004.

DO NOT submit requests for plans and specifications to the site visit personnel listed above. See 'Obtaining Solicitation Documents' below.
_______________________________________________________________________________

Project Description: (Approx. quantities)

This contract will replace two Turbine Shaft Sleeves, two sets of Bearing Oil Coolers, and two sets of High Pressure Lift Pumps and associated equipment. There will be provisions for options for doing additional units. (Government furnished property includes: 3 sets of Thrust Bearing Cooling Coils and 4 sets of Shaft Gland Sleeves.)

The estimated construction cost of this project is between $750,000 and $1,000,000.
_______________________________________________________________________________


The Contractor will be required to commence work within 10 days after notice to proceed and complete the work 360 calendar days after receipt of Notice to Proceed. Provisions will be included for liquidated damages in case of failure to complete the work in the time allowed. Performance and payment bonds will be required. Bonding documents including the power of attorney shall bear an original signature by an officer of the surety.


Bidders (Offerors):
Please be advised of on-line registration requirement for Representations and Certifications Application (ORCA) is now located in System for Award Management (SAM) database https://www.sam.gov/portal/public/SAM/. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update to SAM.

Obtaining Solicitation Documents:

Solicitation documents will be posted to the web via Federal Business Opportunities (www.fbo.gov).

Find solicitation announcement in Fed Biz Opps (www.fbo.gov)
1. Use the 'Quick Search' to locate the project (by entering the solicitation number) or use the advanced search features offered in the 'Find Opportunities' (large arrow in the middle of the page) or use the 'Opportunities' tab followed by the 'Advanced Search' tab.
2. By using the 'login' feature, it allows additional search features and allows you to keep your searches. Login might be required on some solicitations that are considered restricted.
3. Once you have located your project, click on link to solicitation to view the project. Files may be downloaded from the column on the right side reading 'All Files' or from the 'Packages' tab.
4. If you want other vendors, sub-contractors or contractors to contact you, click on the 'Interested Vendors' tab and then 'Add me to Interested Vendors' link at the bottom of the page.

Questions regarding contractual matters should be made to: Wayne Weidenhamer
402 995 2074. Telephone calls regarding Small Business matters should be made to: 402 995 2910. Telephone calls on contents of drawings and specifications should be made to the Project Manager at: 402-995-2499 or Specification Section at: 402-995 2184.

Commander
U.S. Army Engineer District, Omaha
ATTENTION: CENWO-CT-C
1616 Capitol Avenue
Omaha, NE 68102 4901

Federal Business Opportunities Information

Date: 2013 October 21

SOLICITATION NO. W9128F-14-B-0003

On or about 15 November 2013, this office will issue Invitations for Bid for construction of the Turbine Rehab: Thrust Bearing Oil Cooler Installation, Thrust Bearing High Pressure Lift System Rehab and Shaft Sleeve Installation, Big Bend Powerhouse, Fort Thompson, SD. The solicitation will close on or about 17 December 2013.

This solicitation is RESTRICTED TO SMALL BUSINESS PARTICIPATION.

Contractors interested in inspecting the site of the proposed work should contact Tom Stiver at 605-245-2331 ext 3003 or Gabe Mohnen at 605-245-2331 X 3004.

DO NOT submit requests for plans and specifications to the site visit personnel listed above. See 'Obtaining Solicitation Documents' below.
_______________________________________________________________________________

Project Description: (Approx. quantities)

This contract will replace two Turbine Shaft Sleeves, two sets of Bearing Oil Coolers, and two sets of High Pressure Lift Pumps and associated equipment. There will be provisions for options for doing additional units. (Government furnished property includes: 3 sets of Thrust Bearing Cooling Coils and 4 sets of Shaft Gland Sleeves.)

The estimated construction cost of this project is between $750,000 and $1,000,000.
_______________________________________________________________________________


The Contractor will be required to commence work within 10 days after notice to proceed and complete the work 360 calendar days after receipt of Notice to Proceed. Provisions will be included for liquidated damages in case of failure to complete the work in the time allowed. Performance and payment bonds will be required. Bonding documents including the power of attorney shall bear an original signature by an officer of the surety.


Bidders (Offerors):
Please be advised of on-line registration requirement for Representations and Certifications Application (ORCA) is now located in System for Award Management (SAM) database https://www.sam.gov/portal/public/SAM/. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update to SAM.

Obtaining Solicitation Documents:

Solicitation documents will be posted to the web via Federal Business Opportunities (www.fbo.gov).

Find solicitation announcement in Fed Biz Opps (www.fbo.gov)
1. Use the 'Quick Search' to locate the project (by entering the solicitation number) or use the advanced search features offered in the 'Find Opportunities' (large arrow in the middle of the page) or use the 'Opportunities' tab followed by the 'Advanced Search' tab.
2. By using the 'login' feature, it allows additional search features and allows you to keep your searches. Login might be required on some solicitations that are considered restricted.
3. Once you have located your project, click on link to solicitation to view the project. Files may be downloaded from the column on the right side reading 'All Files' or from the 'Packages' tab.
4. If you want other vendors, sub-contractors or contractors to contact you, click on the 'Interested Vendors' tab and then 'Add me to Interested Vendors' link at the bottom of the page.

Questions regarding contractual matters should be made to: Wayne Weidenhamer
402 995 2074. Telephone calls regarding Small Business matters should be made to: 402 995 2910. Telephone calls on contents of drawings and specifications should be made to the Project Manager at: 402-995-2499 or Specification Section at: 402-995 2184.

Commander
U.S. Army Engineer District, Omaha
ATTENTION: CENWO-CT-C
1616 Capitol Avenue
Omaha, NE 68102 4901

Federal Business Opportunities Information

Date: 2013 October 21

SOLICITATION NO. W9128F-14-B-0003

On or about 15 November 2013, this office will issue Invitations for Bid for construction of the Turbine Rehab: Thrust Bearing Oil Cooler Installation, Thrust Bearing High Pressure Lift System Rehab and Shaft Sleeve Installation, Big Bend Powerhouse, Fort Thompson, SD. The solicitation will close on or about 17 December 2013.

This solicitation is RESTRICTED TO SMALL BUSINESS PARTICIPATION.

Contractors interested in inspecting the site of the proposed work should contact Tom Stiver at 605-245-2331 ext 3003 or Gabe Mohnen at 605-245-2331 X 3004.

DO NOT submit requests for plans and specifications to the site visit personnel listed above. See 'Obtaining Solicitation Documents' below.
_______________________________________________________________________________

Project Description: (Approx. quantities)

This contract will replace two Turbine Shaft Sleeves, two sets of Bearing Oil Coolers, and two sets of High Pressure Lift Pumps and associated equipment. There will be provisions for options for doing additional units. (Government furnished property includes: 3 sets of Thrust Bearing Cooling Coils and 4 sets of Shaft Gland Sleeves.)

The estimated construction cost of this project is between $750,000 and $1,000,000.
_______________________________________________________________________________


The Contractor will be required to commence work within 10 days after notice to proceed and complete the work 360 calendar days after receipt of Notice to Proceed. Provisions will be included for liquidated damages in case of failure to complete the work in the time allowed. Performance and payment bonds will be required. Bonding documents including the power of attorney shall bear an original signature by an officer of the surety.


Bidders (Offerors):
Please be advised of on-line registration requirement for Representations and Certifications Application (ORCA) is now located in System for Award Management (SAM) database https://www.sam.gov/portal/public/SAM/. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update to SAM.

Obtaining Solicitation Documents:

Solicitation documents will be posted to the web via Federal Business Opportunities (www.fbo.gov).

Find solicitation announcement in Fed Biz Opps (www.fbo.gov)
1. Use the 'Quick Search' to locate the project (by entering the solicitation number) or use the advanced search features offered in the 'Find Opportunities' (large arrow in the middle of the page) or use the 'Opportunities' tab followed by the 'Advanced Search' tab.
2. By using the 'login' feature, it allows additional search features and allows you to keep your searches. Login might be required on some solicitations that are considered restricted.
3. Once you have located your project, click on link to solicitation to view the project. Files may be downloaded from the column on the right side reading 'All Files' or from the 'Packages' tab.
4. If you want other vendors, sub-contractors or contractors to contact you, click on the 'Interested Vendors' tab and then 'Add me to Interested Vendors' link at the bottom of the page.

Questions regarding contractual matters should be made to: Wayne Weidenhamer
402 995 2074. Telephone calls regarding Small Business matters should be made to: 402 995 2910. Telephone calls on contents of drawings and specifications should be made to the Project Manager at: 402-995-2499 or Specification Section at: 402-995 2184.

Commander
U.S. Army Engineer District, Omaha
ATTENTION: CENWO-CT-C
1616 Capitol Avenue
Omaha, NE 68102 4901

This contract will replace two Turbine Shaft Sleeves, two sets of Bearing Oil Coolers, and two sets of High Pressure Lift Pumps and associated equipment. There will be provisions for options for doing additional units. (Government furnished property includes: 3 sets of Thrust Bearing Cooling Coils and 4 sets of Shaft Gland Sleeves.)