Install two electric pumps on existing USDA equipment

UPdated with additional pictures of the site and chutes, answered questions, and wage determination.

• Moly Manufacturing has 6 options of Silencer, USDA has the Heavy Duty.
• The power will be 220VAC
• The trench that is required is dirt only, no concrete, no asphalt digging.
• Parasal Recommends a 5 HP Parker 50 Amp, 9gal/min pump.  Moly recommends a 5 HP Baldor single phase 40 Amp pump. (our team spoke with these manufacturers about what we have on site and provided their recommendations)

We will accept another motor brand other than Baldor with manufacturer pump installed.  Contractor must provide documentation showing that this alternate setup is appropriate for the chute/load.

• Moly Manufacturing has 6 options of Silencer, USDA has the Heavy Duty.
• The power will be 220VAC
• The trench that is required is dirt only, no concrete, no asphalt digging.
• Parasal Recommends a 5 HP Parker 50 Amp, 9gal/min pump.  Moly recommends a 5 HP Baldor single phase 40 Amp pump. (our team spoke with these manufacturers about what we have on site and provided their recommendations)
• We will accept another motor brand other than Baldor with manufacturer pump installed.  Contractor must provide documentation showing that this alternate setup is appropriate for the chute/load.

Please see the attached PDF for the statement of work along with terms and conditions.