Insert assembly

Closed Solicitation Posted

Solicitation number
SPMYM326Q8002B
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Kittery, Maine, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Defense Logistics Agency Land and Maritime, on behalf of Portsmouth Naval Shipyard, is soliciting quotations for insert assemblies under RFQ number SPMYM326Q8002. The procurement requires three units of Teledyne part number 1085119-101 or equal (drawing 803-1197260 Rev C, piece number 27) and one unit of Teledyne part number 1085115-101 or equal (drawing 803-1197260 Rev C, piece number 7). All offerors must be pre-Factory Acceptance Test (FAT) certified and provide evidence of certification with their quotation, along with descriptive literature demonstrating compliance with specifications. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis, with vendor responsibility determined using PPIRS in accordance with FAR 9.104. Quotations are due by February 2, 2026, at 4:00 PM EST, and must be submitted via email to sam.aiguier@dla.mil and DLA-KME-QUOTATIONS@DLA.MIL.

This solicitation uses no set-aside designations and is being processed under Other than Full and Open Competition using Simplified Acquisition Procedures under FAR 13/13.5. The contract covers commercial items classified under NAICS code 334417 (Electronic Connector Manufacturing) with FSC code 5935. No specific budget range or award value is disclosed in the solicitation documents. All quotations must be submitted with FOB Destination pricing to Portsmouth Naval Shipyard in Kittery, Maine 03904, with the government's required delivery date being as soon as possible. Payment terms are Net 30 days after inspection and acceptance at the destination, with payment via Government Purchase Card (GPC) or Wide Area Workflow (WAWF), and all offerors must be registered and active in SAM.gov at the time of quotation submission.

Notice text

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at FAR 13 as supplemented with the additional information included in this notice.  This announcement constitutes the only solicitation; a written solicitation will not be issued.  PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov.  The RFQ number is SPMYM326Q8002. This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 October 1, 2025 and DFARS Public Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.  The clauses may be accessed in full text at this address:

https://www.ecfr.gov  and  https://www.acquisition.gov/content/list-sections-affected  and  http://www.acq.osd.mil/dpap/dars/change_notices.html.

The FSC Code is 5935 and the NAICS code is 334417. This requirement is being processed utilizing Other than Ful and Open Competition.

Solicitation closes Monday, February 2, 2026, at 4:00 PM est.

***

Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility.  Potential contractors will be screened for responsibility in accordance with FAR 9.104. 

Offerors are required to submit descriptive literature to show how their quotation meets the required specifications.  Failure to provide this information may result in your quotation being determined technically unacceptable.

 The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:

ITEM     DESCRIPTION                                                                   QTY   U/I              UNIT PRICE        TOTAL PRICE

0001       Insert Assembly                                                                   3          EA              __________         ___________

                Teledyne part number 1085119-101 or equal. Salient characteristics are IAW with drawing 803-1197260

Rev C, piece number 27. Per note 25D, Component parts or sub-assemblies shall not be submitted

individually for FAT inspection, however any manufacturer who qualifies their product under 25A, 25B,

or 25C shall also be qualified to manufacture (and market individually) any component part of that

assembly. Offerors must be pre-FAT certified and provide evidence of certification with offer.

0002       Insert Assembly                                                                   1         EA              __________         ___________

                Teledyne part number 1085115-101 or equal. Salient characteristics are IAW with drawing 803-1197260

Rev C, piece number 7. Per note 25D, Component parts or sub-assemblies shall not be submitted

individually for FAT inspection, however any manufacturer who qualifies their product under 25A, 25B,

or 25C shall also be qualified to manufacture (and market individually) any component part of that

assembly. Offerors must be pre-FAT certified and provide evidence of certification with offer.

NOTE:  OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24, 52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH

THEIR OFFER.

FAR CLAUSES AND PROVISIONS

52.204-7, System for Award Maintenance

52.204-9, Personal Identity Verification of Contractor Personnel

52.204-13, SAM Maintenance

52.204-19, Incorporation by Reference of Representations and Certifications

52.204-24* See Attachment for this provision

52.204-26* See Attachment for this provision

52.204-29 FASCSA Representation* See Attachment for this provision

52.211-14, Notice of Priority Rating

52.211-15, Defense Priority And Allocation Requirements

52.211-17, Delivery of Excess Quantities

52.212-1, Instructions to Offerors - Commercial Products and Commercial Services

52.212-3, Offeror Reps and Certs - Commercial Products and Commercial Services

52.212-4, Contract Terms and Conditions – Commercial Items

52.219-1 Alt 1 Small Business Program Representations

52.223-22, Sustainable Products and Services (DEVIATION 2025-O0004) in lieu of clause at FAR 52.223-23.

52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs

52.232-39, Unenforceability of Unauthorized Obligations

52.233-2 Service of Protest

52.242-13 Bankruptcy

52.242-15 Stop Work Order

52.243-1, Changes Fixed Price

52.246-1, Contractor Inspection Requirements

52.247-34, F.O.B-Destination

52.252-1 Solicitation Provisions Incorporated by Reference

52.252-2 Clauses Incorporated by Reference

52.253-1, Computer Generated Forms

52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement:

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

52.233-3, Protest After Award

52.233-4, Applicable Law for Breach of Contract Claim

52.204-27

Prohibition on a ByteDance Covered Application

52.204-30

FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition

52.209-6

Protecting the Government's Interest

52.219-6

Notice of Total Small Business Set-Aside

52.219-28

Post-Award Small Business Program Representation

52.219-33

Nonmanufacturer Rule

52.222-3

Convict Labor

52.222-19

Child Labor

52.222-50

Combating Trafficking in Persons

52.223-11

Ozone Depleting Substances

52.225-3

Buy American-Free Trade Agreements

52.225-13

Restriction on Certain Foreign Purchases

52.226-8

Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-33

Payment by EFT-SAM

DFARS CLAUSES AND PROVISIONS

252.203-7000 Requirements Relating to Compensation of Former DoD Officials,

252.203-7002, Requirement to Inform Employees of Whistleblower Rights

252.203-7005 Representation Relating to Compensation of Former DoD Officials

252.204-7003. Control of Government Personnel Work Product

252.204-7004 Antiterrorism Awareness Training for Contractors.

252.204-7008 Compliance With Safeguarding Covered Defense Information Controls

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (May 2024) (Deviation 2024-O0013)

252.204-7015, Disclosure of Information to Litigation Support Contractors

252.204-7016, * See Attachment for this provision.

252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation

252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

252.204-7019, *See Attachment for this provision.

252.204-7020,  NIST SP 800-171 DoD Assessment Requirements

252.204-7024 Notice on the Use of the Supplier Performance Risk System

252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability

252.211-7003, Item Unique Identification and Valuation

252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.

252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7008  Prohibition of Hexavalent Chromium

252.225-7001 Buy American and Balance of Payments Program

252.225-7002 Qualifying Country Sources as Subcontractors

252.225-7048, Export Controlled Items

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

252.231-7000, Supplemental Cost Principles.

252.232-7006, Wide Area Workflow Payment Instructions

252.232-7010, Levies on Contract Payments

252.243-7001, Pricing of Contract Modifications

252.243-7002, Requests for Equitable Adjustment

252.244-7000, Subcontracts for Commercial Items

252.246-7008, Sources of Electronic Parts

252.247-7023, Transportation of Supplies By Sea

Note: Vendor shall list the country of origin for each line item.

DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)
 

5452.233-9001, Disputes:  Agreement to Use Alternative Disputes Resolution

DLA PROCUREMENT NOTES (See Attachment for Full Text)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)

C04 Unused Former Government Surplus Property (DEC 2016)

C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017)

C20 Vendor Shipment Module (VSM) (AUG 2017)

E05 Product Verification Testing (JUN 2018)

G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017)

H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020)

L06 Agency Protests (DEC 2016)

L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations

L31 Additive Manufacturing (JUN 2018)

M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)

LOCAL CLAUSES (See Attachment for Full Text):

YM3 A1: Additional Information

YM3 C500: Mercury Control (Supplies)

YM3 C501: Correction of Certifications

YM3 C528: Specification Changes

YM3 D2.2: Marking of Shipments

YM3 D4: Preparation for Delivery

YM3 D8: Prohibited Packing Materials

YM3 E2: Inspection and Acceptance (Destination)

YM3 E504: Notice of Constructive Acceptance Period

YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard

YM3 M8: Single Award for All Items

Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM.

This announcement will close Monday, February 2, 2026 at 4:00 PM est.  The Point of Contact for this solicitation is Sam Aiguier who can be reached at sam.aiguier@dla.mil. All responsible sources may submit a quote which shall be considered by the agency.  

System for Award Management (SAM).  Quoters must be registered in the SAM database to be considered for award.  Registration is free and can be completed online at http://www.sam.gov/.

If  not the actual  manufacturer –  Manufacturer’s Name, Location, and Business Size must be provided.

Please submit quotations via email at sam.aiguier@dla.mil.

Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL

All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

******* END OF COMBINED SYNOPSIS/SOLICITATION ********

Files

File Type Posted
Combined Synopsis Solicitation SPMYM326Q8002.docx DOCX document
RFQ SPMYM326Q8002.docx DOCX document

Similar open opportunities

Opportunity Agency Set-aside Responses due
Insert, electrical conn NAICS 334417 Land and Maritime Total Small Business
Connector assembly, ELE NAICS 334417 Land and Maritime No set-aside
Connector, receptacle, e NAICS 334417 Land and Maritime No set-aside
Molded insert Naval Supply Systems Command Total Small Business
Connector assembly, ELE NAICS 334417 Land and Maritime Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity