Indefinite Quantity Contract (IQC) for CONTAINER, TRASH

RESPONSE DATE:  Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).

The solicitation will be available in DIBBS on or about its estimated issue date of November 3. 2020.

DESCRIPTION:

NSN(s): 2040-01-347-0949

Item Description:

CONTAINER, TRASH

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to

export-control of either the International Traffic in Arms regulations

(ITAR) or the Export Administration Regulations (EAR), and cannot be

exported without prior authorization from either the Department of State

or the Department of Commerce. Export includes disclosure of technical

data to foreign persons and nationals whether located in the United

States or abroad. This requirement applies equally to foreign national

employees and U.S. companies and their foreign subsidiaries. DFARS

252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control

technical data to DLA contractors that have an approved US/Canada Joint

Certification Program (JCP) certification, have completed the

Introduction to Proper Handling of DOD Export-Controlled Technical Data

Training and the DLA Export-Controlled Technical Data Questionnaire

(both are available at the web address given below), and have been

approved by the DLA controlling authority to access the

export-controlled data. Instructions for obtaining access to the

export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed

for use are required to have an approved JCP certification and have

been approved by the DLA controlling authority to access

export-controlled data managed by DLA. DLA will not delay award in

order for an offeror or its supplier to apply for and receive approval

by the DLA controlling authority to access the export-controlled data.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

EXCEPTIONS TO DATA (DRAWING 03950  H2040-800-1411 REV-8):

  THE WORD "TOP" MAY BE INK STAMPED OR EMBOSSED AND,MATERIAL

  WILL BE NON-GALVANIZED SAME DIMENSIONS, .020 TO .025 MAX.

UNIT OF ISSUE IS DOZEN (12 CANS). UNIT PACK SHALL BE 12 CANS.

FULL AND OPEN COMPETITION APPLY

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 03950 H2040-800-1411

REVISION NR 8   DTD 05/09/1967

PART PIECE NUMBER: REV 8

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001  PRES MTHD:10  CLNG/DRY:1  PRESV MAT:00

WRAP MAT:00  CUSH/DUNN MAT:HD  CUSH/DUNN THKNESS:D

UNIT CONT:EE  OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

 DVDS SHALL USE A DOUBLE-WALLED CORRU-

 GATED CONTAINER. STAPLE CLOSURE SHALL BE

 APPLIED FOR ALL SHIPMENTS TO ENSURE MAT-

 ERIAL DOES NOT BREAK FREE. NO DEVIATIONS]

 UNIT OF ISSUE IS DZ (DOZEN).

WHENEVER POSSIBLE AND WHEN PERMITTED BY THE

TERMS OF THE CONTRACT, AVOID THE USE OF

PLASTICS AS WRAPPING, CUSHIONING, OR

DUNNAGE MATERIALS.

"ADDITIONAL SPECIAL MARKING REQUIREMENTS:

"CAUTION: SHARP EDGES. HANDLE WITH CARE."

MARK WITH THIS SIDE UP.

Quantity (including option quantity):  ESTIMATED ANNUAL DEMAND = 6400

Ordering Unit of Issue:  Dozen

Destination Information:  Various DLA stocking locations

Delivery Schedule:  75 Days

All responsible sources may submit an offer/quote which shall be considered. 

(X)  The Small Business size standard is 1500 employees.

(X)  While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.

(X)  Various Increments Solicited:

FROM:    TO:

400  -  581                       

582  -  1745                     

1746  -  2909                     

2910 and Up               

(X)  Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.

(X)  The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (base plus option years) shall not exceed  5 years.

 (X) One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.

(X) Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.