Improved Low Loss Launch Valve Bodies
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N6833522R0092
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333999 All Other Miscellaneous General Purpose Machinery Manufacturing
- PSC
- 1720 Aircraft Launching Equipment
- Place of performance
- York, Pennsylvania, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This notice seeks proposals for the procurement of fourteen valve body assemblies including one first article test unit. The Naval Air Warfare Center Aircraft Division Lakehurst intends to award a non-competitive contract to Precision Custom Components LLC under the authority of FAR 6.302-1. The valve bodies are designated as aircraft launch and recovery critical safety items, and public law states that contracts for aviation CSIs may only be awarded to sources approved by the design control activity. Technical data requirements identify Precision Custom Components as the only approved source.
There is no set-aside designated. The items procured fall under NAICS code 339999 and PSC code 2930. The incumbent contractor is Precision Custom Components LLC located in York, PA. Fourteen valve body assemblies will be procured for an unknown total value, with one unit required for first article testing. Delivery timeline is unstated. Responses to the pre-solicitation notice are due within 15 days to determine whether the requirement will be opened to competition.
Notice text
2 versions
Update #2 · Latest ·
The Naval Air Warfare Center Aircraft Division (NAWCAD), Lakehurst in support of the Prototype, Manufacturing, and Test Division is seeking sources that can provide six (6) Improved Low Loss Launch Valve Bodies (ILLLV) (P/N 626769-1) in FY 22, and additional options for six (6) in FY 23, and two additional options of two (2) in FY24.
The Contractor shall meet all technical and quality assurance requirements detailed in the drawings listed below as well as the Technical Data Requirements (TDR) 21-17034 and (Quality Management 1006) QM1006.
- Drawing 626769 Revision A: Valve Body Assembly
- Drawing 416510 Revision G: Inlet Flange
- Drawing 416511 Revision H: Outlet Flange
- Drawing 614566 Revision G: Valve Body
- Drawing 622422 Revision E: Valve Body Weldment
The Government intends to procure the above items under the authority of 10 USC 2304 (c) (1), FAR 6.302-1. The ILLLV Body is a designated Aircraft Launch and Recovery critical safety item (CSI). Public Law 108-136 Section 802 Paragraph 8(2) states, “The head of the contracting activity for an aviation CSI enter into a contract for the procurement, modification, repair, or overhaul of such item only with a source approved by the design control activity in accordance with section 2319 of Title 10, United States Code." Technical Data Requirements 21-17034 regarding the procurement of the ILLLV Body identifies only one approved source, PCC in York, PA. In order to award to any other company than Precision Custom Components LLC, an engineering and quality assurance audit would need to be performed on an interested company. The audit process generally takes twelve (12) months, which is an unacceptable delay to contract award and delivery. All responsible sources are encouraged to submit a proposal in writing that may be used by the Government in determining whether or not to conduct a competitive procurement. A determination by the Government not to open the requirement to competition based upon the response to this notice is solely within the discretion of the Government. Responses must be received within 15 days of publication of this notice.
Update #1 ·
The Naval Air Warfare Center Aircraft Division Lakehurst, NJ intends to solicit, negotiate, and award a contract, on a non-competitive basis, with Precision Custom Components LLC, York, PA for the procurement of Valve Body, PN 626769-1, Quantity of fourteen (14) each, including one (1) First Article Test Unit. The contractor shall meet all technical and quality assurance requirements detailed in the drawings listed blow as well as the Technical Date Requirements (TDR) 21-17034 and Quality Management (QM)1006
- Drawing 626769 Revision A: Valve Body Assembly
- Drawing 416510 Revision G: Inlet Flange
- Drawing 416511 Revision H: Outlet Flange
- Drawing 614566 Revision G: Valve Body
- Drawing 622422 Revision E: Valve Body Weldment
The Government intends to procure the above items under the authority of 10 USC 2304 (c) (1), FAR 6.302-1. The ILLLV Body is a designated Aircraft Launch and Recovery critical safety item (CSI). Public Law 108-136 Section 802 Paragraph 8(2) states, “The head of the contracting activity for an aviation CSI enter into a contract for the procurement, modification, repair, or overhaul of such item only with a source approved by the design control activity in accordance with section 2319 of Title 10, United States Code." Technical Data Requirements 21-17034 regarding the procurement of the ILLLV Body identifies only one approved source, PCC in York, PA. In order to award to any other company than Precision Custom Components LLC, an engineering and quality assurance audit would need to be performed on an interested company. The audit process generally takes twelve (12) months, which is an unacceptable delay to contract award and delivery. All responsible sources are encouraged to submit a proposal in writing that may be used by the Government in determining whether or not to conduct a competitive procurement. A determination by the Government not to open the requirement to competition based upon the response to this notice is solely within the discretion of the Government. Responses must be received within 15 days of publication of this notice.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Improved Low Loss Launch Valve Bodies | Award Notice | |
| This notice | Pre-Solicitation | |
| Improved Low Loss Launch Valve Bodies | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Body, valve | Naval Supply Systems Command | No set-aside | |
| Valve assembly, mani, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Body, valve | Land and Maritime | No set-aside | |
| Valve assembly, mani, in repair/modification of | Naval Supply Systems Command | Total Small Business | |
| GOV valve body assy | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity