Hydraulics, valves, and couplers
Closed Solicitation Posted
- Solicitation number
- SPMYM123Q0137
- Agency
- Land and Maritime Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332912 Fluid Power Valve and Hose Fitting Manufacturing
- PSC
- 4820 Valves, Nonpowered
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency (DLA) Maritime Norfolk intends to award a Firm Fixed Price (FFP) Single Award Contract for various hydraulic equipment and related items. The items include hydraulic couplers, hose assemblies, hydraulic cylinders, check valves, gauges, manifolds, hydraulic pumps, and high-pressure fittings. The anticipated delivery date for this acquisition is three months after the contract award, with proposals due by 3:00 PM EST on 27 SEPT 2023.
List of products and services to be provided:
- 10 EA C604, 3/8" High Flow Hydraulic Coupler, Complete Set
- 10 EA ENE H-P9220 Hose Assy 20' 3/8" NPT+ CH604 Ends
- 8 EA 98.1 Ton Capacity, 2.25 in Stroke, Low Height Hydraulic Cylinder
- 8 EA Manually Operated Check Valve w/ Built in Relief Valve
- 2 EA Liquid Filled Gauge CBM 0-1000 PSI
- 2 EA ENE AMGC41 5 Port Split Flow Manifold, Single Acting Cylinders
- 2 EA Enerpac®ZU Series ZU4708PB Hydraulic Pump, 115 V, 1 PH, 1.7 HP, 416 CU-IN Reservoir, Pendant Pump Control
- 2 EA High Pressure Fitting, Tee, 10,000 PSI Maximum Operating Pressure, Connection from 3/8" NPTF Female to 3/8" NPTF Female.
Notice text
The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The award determination will be lowest price technically acceptable (LPTA). The required items are for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.
The Contract Line Items (CLINs) are as follows:
CLIN 0001
QTY 10 EA
C604, 3/8" HIGH FLOW HYDRAULIC COUPLER, COMPLETE SET
CLIN 0002
QTY 10 EA
ENE H-P9220 HOSE ASSY 20' 3/8" NPT+ CH604 ENDS
CLIN 0003
QTY 8 EA
98.1 TON CAPACITY, 2.25 IN STROKE, LOW HEIGHT HYDRAULIC CYLINDER
CLIN 0004
QTY 8 EA
MANUALLY OPERATED CHECK VALVE W/ BUILT IN RELIEF VALVE
CLIN 0005
QTY 2 EA
LIQUID FILLED GAUGE CBM 0-1000 PSI
CLIN 0006
QTY 2 EA
ENE AMGC41 5 PORT SPLIT FLOW MANIFOLD, SINGLE ACTING CYLINERS
CLIN 0007
QTY 2 EA
ENERPAC®ZU SERIES ZU4708PB HYDRAULIC PUMP, 115 V, 1 PH, 1.7 HP, 416 CU-IN RESERVOIR, PENDANT PUMP CONTROL PART#: ZU4708PB
SPECIFICATIONS:
CYLINDER COMPATIBILITY: SINGLE-ACTING
FREQUENCY RATING: 50/60 HZ
HP RATING : 1.7 HP
HEIGHT: 20-1/2 IN
LENGTH: 25 IN
MAXIMUM FLOW RATE: 60 CU-IN/MIN
MAXIMUM OPERATING PRESSURE: 10000 PSI
PHASE: 1 PH
PUMP CONTROL TYPE: PENDANT
RESERVOIR CAPACITY: 416 CU-IN
SERIES: ZU
SOUND LEVEL: 85 TO 90 DBA
USABLE OIL CAPACITY : 2 GAL
VALVE FUNCTION : ADVANCE, RETRACT
VALVE OPERATION : MANUAL WITH PENDANT AND CLASSIC ELECTRIC
VALVE TYPE : 3-WAY, 2-POSITION MANUAL
VOLTAGE RATING: 115 V
WIDTH : 12-1/2 IN
CLIN 0008
QTY 2 EA
HIGH PRESSURE FITTING, TEE, 10,000 PSI MAXIMUM OPERATING PRESSURE, CONNECTION FROM 3/8" NPTF FEMALE TO 3/8" NPTF FEMALE
The requirement will be solicited as Small Business Total Set-Aside. The NAICS code applicable to this procurement is 3332912 with a size standard of 1000. The Product Service Code is 4820. The solicitation document incorporates provisions and clauses in effect through FAC 2023-01 and DFARS Change Notice 10/28/2022.
The anticipated delivery date for this acquisition is 3 months after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only.
The solicitation number is SPMYM123Q0137, and it is expected to be available on or about 23 SEPT 2023 and posted to SAM.gov, https://sam.gov/. Proposals are due by 3:00 PM EST on 27 SEPT 2023. Responses to the solicitation notice shall be emailed to the attention of Jorge Arcelay at Jorge.Arcelay@dla.mil. Please make sure that the solicitation number (SPMYM123Q0137) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.
Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.
All responsible sources may submit a proposal which may be considered by the Government. By submitting an offer, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Jorge Arcelay at Jorge.Arcelay@dla.mil.
Attachments
| File | Type | Posted |
|---|---|---|
| SOLICITATION SPMYM123Q0137.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity