Hybrid Mechanical Backside Silicon Preparation Tool

Added: Jun 03, 2016 2:02 pm AMENDMENT 0002

The purpose for this amendment is to answer Vendor questions.

Question: "Our Technical team had a question regarding the requirement for 120V AC (20A) single phase electrical. Part of the process for Parylene Vapor Deposition requires a high temperature and using a 240V 3 phase w ould increase efficiency such as warm-up time for the heater.

Please advise if the bid could be submitted w ith 240V 3 phase electrical."

Answer: "No, 3 phase 240 w ill not work for w here the unit has to be placed. There is no other place for the unit to sit. Besides the unit we have spec'd will w ork on 120 single phase just fine."

If you have any questions please contact Nathan Heikkinen at the following email: nathan.heikkinen@navy.mil or by phone: 812-854-5169.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Added: May 03, 2016 1:15 pm

AMMENDMENT 0001
The purpose of this amendment is to revise the attachments due to computer programming error. Please use the attachments posted with Amendment 0001.

Added: May 02, 2016 3:57 pm
N00164-16-T-GM46-Hybrid Mechanical Backside Silicon Preparation Tool - FSC 6635 - NAICS 334516

Anticipated Issue Date 2 May 2016-Anticipated Closing Date 13 June 2016-2:00 PM EST

The Navy has a requirement for the procurement of a Hybrid Mechanical Backside Silicon Preparation Tool to be produced in accordance with Government specifications and Statement of Work (See CLINs below.) This synopsis will be issued pursuant to the procedures in FAR Part 13.5 for an anticipated Firm Fixed Price (FFP) contract. Delivery Terms are FOB Destination, Inspection and Acceptance: Destination.

CLIN 0001- Dual/Cross Beam Instrument including installation, alignment, and calibration Qty: 1
CLIN 0002- Backside Prep System including installation, alignment, and calibration Qty: 1
CLIN 0003 Parylene Deposition System including phone support during installation Qty: 1
CLIN 0004 OPTION- Delineation Etch system- 2016 or later for Dual/Cross Beam Qty: 1
CLIN 0005 OPTION- Advanced Operations Training for Dual/Cross Beam Instrument Qty: 1
CLIN 0006 OPTION- Consumables for Dual/Cross Beam Instrument IAW Specification Qty: 1
CLIN 0007 OPTION- Year 1 Maintenance Agreement 2017 Dual/Cross Beam PoP one year
CLIN 0008 OPTION- Year 2 Maintenance Agreement 2018 Dual/Cross Beam PoP one year
CLIN 0009 OPTION- Year 3 Maintenance Agreement 2019 Dual/Cross Beam PoP one year
CLIN 00010 OPTION- Year 4 Maintenance Agreement 2020 Dual/Cross Beam PoP one year
CLIN 00011 OPTION- Year 1 Maintenance Agreement 2017 for Backside Prep PoP one year
CLIN 0012 OPTION- Year 2 Maintenance Agreement 2018 for Backside Prep PoP one year
CLIN 0013 OPTION- Year 3 Maintenance Agreement 2019 for Backside Prep PoP one year
CLIN 0014 OPTION- Year 4 Maintenance Agreement 2020 for Backside Prep PoP one year

Inspection and acceptance will be performed at NSWC Crane. This solicitation will utilize full and open competition. Multiple Awards may be made. The Contractor must be registered in the System for Award Management (SAM). Contractors interested in responding with a valid quote may obtain information on registration in SAM via http://www.sam.gov. If there are any differences between this synopsis and the solicitation, the solicitation takes precedence.

The solicitation will be available for download on or about 2 May 2016, simultaneous with the posting of this synopsis. Interested parties can download the solicitation and enclosed attachments from www.fbo.gov; no hard copies of the solicitation will be mailed. Closing date will be on or about 13 June 2016. All responsible parties may submit a proposal for this procurement which will be considered by the Government. This is not a Request for Proposal. If any interested parties have questions concerning this Government procurement, please contact Ms. Shirley Corbin (shirley.corbin@navy.mil) or 812-854-6219. Complete mailing address is Code 0221, Bldg. 121, NSWC Crane, 300 Highway 361, Crane, IN 47522-5001.