Hull assembly

HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|MIL-I-45208 OR ISO9001|

INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2|||

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)|16|INVOICE/RECEIVING REPORT - COMBO|N/A|TBD|SPRMM1|TBD|TBD|SEE SCHEDULE|TBD|||TBD|||||N/A|

BUY AMERICAN --FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM - BASIC(DEVIATION 2020-O0019) (JUL 2020))|3||||

NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (MAR 2020)(DEVIATION 2020-O0008)|1||

ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (APR 2020)|13|X|X|X||X|X||||||||

ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2020)|13|336612|1000|X|X|X|||||||||

REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCESERVICES OR EQUIPMENT (AUG 2019))|2|||

NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X|

EVALUATION CRITERIA AND BASIS FOR AWARD-|1| |

This solicitation is being issued in accordance with Special Emergency Procurement Authority (SEPA). As a result, the procurement is exempt from IUID IAW DFARS 211.274-2(b)(1).

Drawings for this solicitation can be accessed via www.Beta.SAM.gov. Select ALL AWARD DATA and search by the solicitation number. The solicitation will include a link to the drawings. Registration to the website is required to access the drawings. Drawings are

normally available within 1 week after the solicitation is posted. If there are problems accessing the drawings after 1 week of the solicitation posting, please contact the buyer listed.

Required Delivery is 210 days After Date of Contract.

Quoted delivery is ____ days ADC.

Inspection of material will be at:

______________________________________________________________________

Inspection of packaging and final acceptance of material will be at:

______________________________________________________________________

All contractual documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders and Modifications) related to the instant procurement are considered to be "Issued" by the Government when copies are either deposited in the mail, transmitted by Facsimile,

or sent by other electronic commerce methods such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "Issue" contractual documents as detailed herein.

\

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the HULL ASSEMBLY .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made.

2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order,

however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

DRAWING DATA=22351 |53711|D1|WS |D|0000.A | C|49998|0020262

DRAWING DATA=22351 |53711|D1|WS |D|0000.COV | C|49998|0031612

DRAWING DATA=22351 |53711|D1|WS |D|0000.I | C|49998|0054209

DRAWING DATA=22351 |53711|D1|WS |D|0000.II | C|49998|0054129

DRAWING DATA=22351 |53711|D1|WS |D|0000.III | C|49998|0049248

DRAWING DATA=22351 |53711|D1|WS |D|0000.IV | C|49998|0011975

DRAWING DATA=22351 |53711|D1|WS |D|0001 |D1|49998|2185385

DRAWING DATA=22351 |53711|D1|WS |D|0002 | C|49998|0043146

DRAWING DATA=22351 |53711|D1|WS |D|0003 | C|49998|0045436

DRAWING DATA=22351 |53711|D1|WS |D|0004 | C|49998|0052090

DRAWING DATA=22351 |53711|D1|WS |D|0005 | C|49998|0042580

DRAWING DATA=22351 |53711|D1|WS |D|0006 | C|49998|0020428

DRAWING DATA=22351 |53711|D1|WS |D|0007 | C|49998|0082757

DRAWING DATA=22351 |53711|D1|WS |D|0008 | C|49998|0056089

DRAWING DATA=22351 |53711|D1|WS |D|0009 | C|49998|0038654

DRAWING DATA=22351 |53711|D1|WS |D|0010 | C|49998|0091776

DRAWING DATA=22351 |53711|D1|WS |D|0011 | C|49998|0060675

DRAWING DATA=22351 |53711|D1|WS |D|0012 | C|49998|0056921

DRAWING DATA=22351 |53711|D1|WS |D|0013 | C|49998|0049615

DRAWING DATA=22351 |53711|D1|WS |D|0014 | C|49998|0077587

DRAWING DATA=22351 |53711|D1|WS |D|0015 | C|49998|0060289

DRAWING DATA=22351 |53711|D1|WS |D|0016 | C|49998|0040174

DRAWING DATA=22351 |53711|D1|WS |D|0017 | C|49998|0088230

DRAWING DATA=22351 |53711|D1|WS |D|0018 | C|49998|0053973

DRAWING DATA=22351 |53711|D1|WS |D|0019 | C|49998|0046662

DRAWING DATA=22351 |53711|D1|WS |D|0020 | C|49998|0051750

DRAWING DATA=22351 |53711|D1|WS |D|0021 | C|49998|0047195

DRAWING DATA=22351 |53711|D1|WS |D|0022 | C|49998|0080839

DRAWING DATA=22351 |53711|D1|WS |D|0023 | C|49998|0066737

DRAWING DATA=22351 |53711|D1|WS |D|0024 | C|49998|0034493

DRAWING DATA=22351 |53711|D1|WS |D|0025 | C|49998|0052731

DRAWING DATA=22351 |53711|D1|WS |D|0026 | C|49998|0057586

DRAWING DATA=22351 |53711|D1|WS |D|0027 | C|49998|0069442

DRAWING DATA=22351 |53711|D1|WS |D|0028 | C|49998|0076567

DRAWING DATA=22351 |53711|D1|WS |D|0029 | C|49998|0076283

DRAWING DATA=22351 |53711|D1|WS |D|0030 | C|49998|0068585

DRAWING DATA=22351 |53711|D1|WS |D|0031 | C|49998|0065821

DRAWING DATA=22351 |53711|D1|WS |D|0032 | C|49998|0012436

DRAWING DATA=2505685 |10001| R|FN |D|0001 | R|49998|0022962

DRAWING DATA=5584929 |53711| E|FN |D|0001 | E|49998|0142252

DRAWING DATA=5584929 |53711| E|FN |D|0002 | D|49998|0144958

DRAWING DATA=5584929 |53711| E|FN |D|0003 | E|49998|0278041

DRAWING DATA=5584929 |53711| E|FN |D|0004 | E|49998|0139162

DRAWING DATA=5585237 |53711| F|DOC|D|0001 | F|49998|2199115

DRAWING DATA=5855688-501 |53711| R|FN |D|0001 | R|49998|0320942

DRAWING DATA=5855688-501 |53711| R|PL |D|0001 | R|49998|0018223

DRAWING DATA=5855689 |53711| E|FN |D|0001 | E|49998|0028736

DRAWING DATA=5855690-503 |53711| E|FN |D|0001 | E|49998|0335856

DRAWING DATA=5855690-503 |53711| E|PL |D|0001 | E|49998|0026318

DRAWING DATA=5855691-501 |53711| E|PL |D|0001 | E|49998|0033373

DRAWING DATA=5855691-501 |53711| E|PL |D|0002 | E|49998|0017004

DRAWING DATA=5855692 |53711| E|FN |D|0001 | E|49998|0045363

DRAWING DATA=5855692 |53711| E|PL |D|0001 | E|49998|0022916

DRAWING DATA=5855692-501 |53711| E|PL |D|0001 | E|49998|0017323

DRAWING DATA=5855693 |53711| C|FN |D|0001 | C|49998|0026991

DRAWING DATA=5855706 |53711| E|FN |D|0001 | E|49998|0032227

DRAWING DATA=5855706 |53711| C|PL |D|0001 | C|49998|0032284

DRAWING DATA=5855815 |53711| C|FN |D|0001 | C|49998|0023062

DRAWING DATA=5855815 |53711| B|PL |D|0001 | B|49998|0016756

DRAWING DATA=5855867 |53711| B| |D|0001 | B|49998|0083873

DRAWING DATA=5855867 |53711| D|FN |D|0001 | D|49998|0035396

DRAWING DATA=5855867-501 |53711| B|PL |D|0001 | B|49998|0007609

DRAWING DATA=5855867-501 |53711| B|PL |D|0002 | B|49998|0008721

DRAWING DATA=5855880 |53711| D|FN |D|0001 | D|49998|0036509

DRAWING DATA=5855880-501 |53711| B|PL |D|0001 | B|49998|0007397

DRAWING DATA=5855880-501 |53711| B|PL |D|0002 | B|49998|0008892

DRAWING DATA=5855894 |53711| D|FN |D|0001 | D|49998|0031631

DRAWING DATA=5855896 |53711| B|FN |D|0001 | B|49998|0036270

DRAWING DATA=5855973 |53711| B|FN |D|0001 | B|49998|0029162

DRAWING DATA=5855986 |53711| C|FN |D|0001 | C|49998|0026121

DRAWING DATA=5855986 |53711| B|PL |D|0001 | B|49998|0029694

DRAWING DATA=5855986 |53711| B|PL |D|0002 | B|49998|0009026

DRAWING DATA=5856015 |53711| F|FN |D|0001 | F|49998|0062964

DRAWING DATA=5856015 |53711| F|PL |D|0001 | F|49998|0017286

DRAWING DATA=5856015-501 |53711| F|PL |D|0001 | F|49998|0017861

DRAWING DATA=5856017 |53711| G|FN |D|0001 | G|49998|0044174

DRAWING DATA=5856018 |53711| C|FN |D|0001 | C|49998|0042781

DRAWING DATA=5856019 |53711| B|FN |D|0001 | B|49998|0028916

DRAWING DATA=5856040 |53711| C|FN |D|0001 | C|49998|0036426

DRAWING DATA=5856068 |53711| C|FN |D|0001 | C|49998|0048644

DRAWING DATA=5856068 |53711| C|PL |D|0001 | C|49998|0017182

DRAWING DATA=5856077 |53711| A|FN |D|0001 | A|49998|0040469

DRAWING DATA=5856077 |53711| A|FN |D|0002 | A|49998|0029400

DRAWING DATA=5856077 |53711| A|FN |D|0003 | A|49998|0028923

DRAWING DATA=5856077 |53711| A|FN |D|0004 | A|49998|0043080

DRAWING DATA=5856077 |53711| A|FN |D|0005 | A|49998|0045972

DRAWING DATA=5856077 |53711| A|FN |D|0006 | A|49998|0046875

DRAWING DATA=5856077 |53711| A|FN |D|0007 | A|49998|0046831

DRAWING DATA=5856077 |53711| A|FN |D|0008 | A|49998|0040357

DRAWING DATA=5856077 |53711| A|FN |D|0009 | A|49998|0047182

DRAWING DATA=5856077 |53711| A|FN |D|0010 | A|49998|0028967

DRAWING DATA=5856077 |53711| A|FN |D|0011 | A|49998|0020160

DRAWING DATA=5856121 |53711| -|FN |D|0000.COV | -|49998|0023136

DRAWING DATA=5856121 |53711| -|FN |D|0001 | -|49998|0022932

DRAWING DATA=5856121 |53711| -|FN |D|0002 | -|49998|0036369

DRAWING DATA=5856121 |53711| -|FN |D|0003 | -|49998|0023579

DRAWING DATA=5856121 |53711| -|FN |D|0004 | -|49998|0031649

DRAWING DATA=5856121 |53711| -|FN |D|0005 | -|49998|0032974

DRAWING DATA=5856121 |53711| -|FN |D|0006 | -|49998|0033961

DRAWING DATA=5856121 |53711| -|FN |D|0007 | -|49998|0017269

DRAWING DATA=5856124 |53711| -|FN |D|0000.COV | -|49998|0024633

DRAWING DATA=5856124 |53711| -|FN |D|0001 | -|49998|0028185

DRAWING DATA=5856124 |53711| -|FN |D|0002 | -|49998|0031874

DRAWING DATA=5856124 |53711| -|FN |D|0003 | -|49998|0036717

DRAWING DATA=5856124 |53711| -|FN |D|0004 | -|49998|0014165

DRAWING DATA=5856124 |53711| -|FN |D|0005 | -|49998|0034411

DRAWING DATA=5856124 |53711| -|FN |D|0006 | -|49998|0033619

DRAWING DATA=5856124 |53711| -|FN |D|0007 | -|49998|0043874

DRAWING DATA=5856124 |53711| -|FN |D|0008 | -|49998|0019557

DRAWING DATA=5946746 |53711| B|FN |D|0001 | B|49998|0022813

DRAWING DATA=5946747 |53711| C|FN |D|0001 | C|49998|0023370

DRAWING DATA=5946748 |53711| A|FN |D|0001 | A|49998|0031216

DRAWING DATA=5946767 |53711| C|FN |D|0001 | C|49998|0020617

DRAWING DATA=5946767 |53711| C|PL |D|0001 | C|49998|0016541

DRAWING DATA=6146923 |53711| J|FN |D|0001 | J|49998|0024783

DRAWING DATA=6510315 |53711| E|FN |D|0001 | E|49998|0032788

DRAWING DATA=6700021-1 |53711| B|PL |D|0001 | B|49998|0016565

DRAWING DATA=6700021-2 |53711| B|PL |D|0001 | B|49998|0016575

DRAWING DATA=6879857 |53711| C|FN |D|0001 | C|49998|0033654

DRAWING DATA=7053037 |53711| A|FN |D|0001 | A|49998|0041593

DOCUMENT REF DATA=MIL-STD-129 | | |P |041029|A| |03|

DOCUMENT REF DATA=ISO9001 | | | |010417|A| | |

DOCUMENT REF DATA=MIL-STD-973 | | | |950113|A| |03|

3. REQUIREMENTS

3.1 Design, Manufacture, and Performance - Except as modified herein,

the HULL ASSEMBLY furnished under this contract/purchase order shall meet the

design, manufacture, and performance requirements specified on drawing ;53711 5855690-503;

cage ; .

3.2 Marking - This item shall be physically identified in accordance

with ;MIL-STD-129; .

3.3 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973,

Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original

and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.)

3.3.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until

another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted,

the date of the granting of the authorization, and the name of the granting authority.

Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below.

The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788.

Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the Contractor.

3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material

will be cause for rejection.

If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The

contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting

Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part.

The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of

contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are

located so as not to constitute a contamination hazard.

If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a

polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the

requirements of this contract are concerned.

These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements.

Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided:

Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a

component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface

ship atmosphere.

4. QUALITY ASSURANCE

4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order,

the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the

specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.2 Quality System Requirements - The supplier shall provide and maintain a quality system acceptable to the Government. The quality system requirements shall be in accordance with ISO 9001.

4.2.1 ;Suppliers currently using and maintaining Inspection System Requirements to

MIL-I-45208 are granted permission to utilize this if desired.;

4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any

inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance

does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.4 Records of Inspection - (This requirement is not applicable to Government Purchase Orders) Records of all inspection work performed by the Contractor, as referenced elsewhere in this contract, shall be kept complete and available to the Government during

the performance of the contract and for a period of four years after final delivery of supplies.

4.5 Quality Conformance Inspection - The contractor is responsible for conducting a Quality Conformance Inspection in accordance with ;No FAT required. However, 5855688-501 (Shell Assembly) is the next lower assembly to 5855690-503. Note 21 on 5855688-501

describes the hydrostatictest requirements for the shell. Require a certificates of conformancefor this as well as the engineer sign off on the testing of the shell; , paragraph ;prior to shipment.; and preparing an inspection report in accordance with the

Contract Data Requirements List, DD Form 1423.

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

6. NOTES

6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS)

(i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products.

A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk.

B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies.

C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to:

Commander, Indian Head Division, Naval Surface Warfare Center

Code 8410P, 101 Strauss Avenue

Indian Head, MD 20640-5035

D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for

certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document.

E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from:

Contracting Officer

NAVICP-MECH

Code 87321

5450 Carlisle Pike

P.O. Box 2020

Mechanicsburg, Pa. 17055-0788

F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from:

Commanding Officer

NAVICP-MECH

Code 009

5450 Carlisle Pike

P.O. Box 2020

Mechanicsburg, Pa. 17055-0788

G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from:

Naval Inventory Control Point

Code 1 Support Branch

700 Robbins Avenue

Phildelphia, Pa. 19111-5094

H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH.

DATE OF FIRST SUBMISSION=030 DAC

;No FAT required. However, 5855688-501 (Shell Assembly) is the next lower assembly to 5855690-503. Note 21 on 5855688-501 describes the hydrostatictest requirements for the shell. POC Ken Oehmen Telework number: 401-787-8308 ken.oehmen@navy.mil;