Hopper Spreader
Closed Solicitation Posted
- Solicitation number
- W911S226U3764
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333120 Construction Machinery Manufacturing
- Place of performance
- Fort Hood TX 76544
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum seeks a 2026 or newer SaltDogg model 14514F570121 or equivalent 10 cubic yard hopper spreader with electric 24-inch wide conveyor chain, with proposals due July 27. This is a Total Small Business set-aside.
Place of performance is Fort Hood, Texas 76544. The spreader must feature a 304 stainless steel hopper (14 feet long, 57 inches wide, 9–10 cubic yard capacity), pintle chain conveyor with stainless steel floor in inverted V design, 1/2 HP 12V DC electric motor with independent conveyor and spinner motors, adjustable feed gate and chute/baffles, 10 gauge steel floor construction with 3-inch structural channel supports at 16-inch on-center spacing, 12 gauge exterior posts, and in-cab controls with independent variable speeds. The spreader must handle bulk salt, bulk sand, and salt/sand mix and be ready for dump body installation with a top screen included.
Installation will occur within 100 miles of Fort Hood. The final offer must include delivery and off-load of the spreader to the installation location, installation labor, delivery and off-load of spreader stands to the end user location, and up to 2 hours of onsite personnel training. Two specific Freightliner 114SD trucks (VINs 1FVHG3FM0PHUM8989 and 3ALHG3FM9SDVM6790 with West Mark Dumptruck3 beds) are identified as installation platforms.
The NAICS code is 333120, Construction Machinery Manufacturing; the PSC code is 3805, Earth Moving and Excavating Equipment.
Notice text
2 versions
Update #2 · Latest ·
2026 or newer SaltDogg model 14514F570121 or equivalent, 10cubic yard hopper spreader with electric 24in wide conveyor chain. HOPPER MATERIAL:304 Stainless Steel HOPPER LENGTH: 14 ft; HOPPER WIDTH: 57 in; HOPPERCAPACITY: 9?10 cubic yards; CONVEYOR TYPE: Pintle chain conveyor; CONVEYORWIDTH: ~24.5 in (with 3/8 in crossbars) CONVEYOR FLOOR MATERIAL: Stainless steel; CONVEYOR DESIGN: Inverted V design to reduce stress MOTOR TYPE: Electric motor; MOTOR POWER: 1/2 HP; OPERATING VOLTAGE: 12V DC-powered electric drive with independent conveyor and spinner motors; FEEDGATE: Adjustable with lock pin; CHUTE/BAFFLE: Adjustable chute and baffles let you tailor height and spread to your application; FLOOR CONSTRUCTION: 10 GA steel sheet; FLOOR SUPPORTS: 3-inch structural channels, 16 in on-center; EXTERIOR POSTS:12 GA steel, 5-inch formed posts at 36?48 in; INTERIOR POSTS: 3-inch structural channels at 16 in spacing; CONTROL SYSTEM: In-cab controls with independent variable speeds for the conveyor and spinner; SPREADER STAND: Allows removal of spreader 14-15 FT Black Power; TOP SCREEN: Included; DESIGNED FOR DUMP BODIES: Ready; MATERIALS SPREAD: Bulk salt, bulk sand, and salt/sand mix; SPREADER INSTALLATION: within100 miles of Fort Hood TX 76544. FINAL OFFER SHALL INCLUDE - delivery of spreader to installation location and off-load, installation of spreader, delivery of spreader stands and off-load to end user location at 76544, and up to 2hrs of onsite training for personnel at end users location. Spreaders will be installed and used in the below trucks: Truck Model: Freightliner 114SD Truck VIN: 1FVHG3FM0PHUM8989 Bed: West Mark/Dumptruck3 Serial #: D00598Truck Model: Freightliner 114SD Truck VIN: 3ALHG3FM9SDVM6790 Bed: West Mark/Dumptruck3 Serial #: D01079
Update #1 ·
2026 or newer SaltDogg model 14514F570121 or equivalent, 10cubic yard hopper spreader with electric 24in wide conveyor chain. HOPPER MATERIAL:304 Stainless Steel HOPPER LENGTH: 14 ft; HOPPER WIDTH: 57 in; HOPPERCAPACITY: 9?10 cubic yards; CONVEYOR TYPE: Pintle chain conveyor; CONVEYORWIDTH: ~24.5 in (with 3/8 in crossbars) CONVEYOR FLOOR MATERIAL: Stainless steel; CONVEYOR DESIGN: Inverted V design to reduce stress MOTOR TYPE: Electric motor; MOTOR POWER: 1/2 HP; OPERATING VOLTAGE: 12V DC-powered electric drive with independent conveyor and spinner motors; FEEDGATE: Adjustable with lock pin; CHUTE/BAFFLE: Adjustable chute and baffles let you tailor height and spread to your application; FLOOR CONSTRUCTION: 10 GA steel sheet; FLOOR SUPPORTS: 3-inch structural channels, 16 in on-center; EXTERIOR POSTS:12 GA steel, 5-inch formed posts at 36?48 in; INTERIOR POSTS: 3-inch structural channels at 16 in spacing; CONTROL SYSTEM: In-cab controls with independent variable speeds for the conveyor and spinner; SPREADER STAND: Allows removal of spreader 14-15 FT Black Power; TOP SCREEN: Included; DESIGNED FOR DUMP BODIES: Ready; MATERIALS SPREAD: Bulk salt, bulk sand, and salt/sand mix; SPREADER INSTALLATION: within100 miles of Fort Hood TX 76544. FINAL OFFER SHALL INCLUDE - delivery of spreader to installation location and off-load, installation of spreader, delivery of spreader stands and off-load to end user location at 76544, and up to 2hrs of onsite training for personnel at end users location.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| 11K Forklift - Riley - TRADE IN REQ | MICC Fort Drum | Total Small Business | |
| AFSBn Snow Removal | MICC Fort Drum | Total Small Business | |
| 11K forklift - riley - trade in REQ | MICC Fort Drum | Total Small Business | |
| Skid Steer | MICC Fort Drum | No set-aside | |
| Refrigerated Sliding Door merchandiser | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity