High-Speed Metal Stamping Press System for Brushless DC Motor Stator Lamination-Tobyhanna
Closed Pre-Solicitation Posted
- Solicitation number
- W51AA126A0123
- Agency
-
Department of the Army
Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 335312 Motor and Generator Manufacturing
- PSC
- 3443 Mechanical Presses, Power Driven
- Place of performance
- Tobyhanna, Pennsylvania 18466, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Army Contracting Command (ACC) - Aberdeen Proving Ground's Tobyhanna Division is conducting a Sources Sought to identify potential vendors capable of providing a high-speed metal stamping press system for brushless DC motor stator lamination. The system must be capable of processing electrical steel stock ranging from 0.2mm to 0.5mm thickness and laminating brushless DC motor stators with diameters up to 50mm, utilizing full-face bonding varnish such as Thyssen Krupp Stabolit 70 or Quaker Houghton QH Evertreat 7000. Respondents must address five primary information areas: high-speed press system specifications including tonnage capacity, stroke rate, bed and slide dimensions, and automation features; lamination and bonding process details; system integration and turnkey solution capabilities; vendor information and customer references; and sourcing requirements mandating that all bearing materials must not originate from restricted countries including China, Russia, Iran, and North Korea. This is a sources sought notification only and does not constitute a Request for Proposal or commitment to contract; responses are requested for information and planning purposes. Responses must be submitted electronically in Microsoft Word or PDF format to corey.d.katsak.civ@army.mil and steven.wiltz.civ@army.mil no later than 12:00 p.m. EDT on March 30, 2026, limited to ten 8.5" x 11" pages in bullet format with minimum 10-point font.
This opportunity carries no set-aside designation and no incumbent contractor or potential award value has been identified in the pre-solicitation notice. Respondents should note that this sources sought does not preclude future participation if a formal solicitation is issued, and the government reserves the right to conduct follow-up discussions with respondents for additional information or clarification. All proprietary or confidential business information submitted in response will be protected from external release. The government will not compensate respondents for information provided or costs incurred in developing responses, and all submissions are voluntary. The Federal Meta Opportunity ID is 69bc689bcbe812847f038bc7, and interested vendors should direct questions to Steve Wiltz or Corey Katsak at the contact information provided in the notice.
Notice text
THIS IS A SOURCES SOUGHT ONLY - This Sources Sought is issued solely for information and planning purposes - it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. Responses will be treated as information only and will not be used as a proposal. Solicitations are not available at this time. Requests for a solicitation will not receive a response. This notice does not constitute a commitment by the United States Government to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the United States Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the United States Government. All information received in response to this sources sought that is marked proprietary will be handled accordingly. Responses to this sources sought that indicate that the information therein is proprietary, or represents confidential business information, will be received, and held in confidence. Not responding to this source sought does not preclude participation in any future RFP, if any is issued. Please note, if a solicitation or multiple solicitations are posted in the future, they will be issued by a separate solicitation. The Government reserves the right to follow up on a one-on-one basis with Sources Sought respondents to gain additional information or clarity about information submitted. The Army Contracting Command (ACC) - Aberdeen Proving Ground (ACC-APG), Tobyhanna Division, is conducting this sources sought in order to identify potential vendors that possess the capabilities to support a requirement to provide:
**High Speed Metal Stamping Press System for Brushless DC Motor Stator lamination**
**See Attachment for Details**
Point of Contact for questions regarding this Sources Sought and all responses: Steve Wiltz, Email: steven.wiltz.civ@army.mil or Corey Katsak, Email: corey.d.katsak.civ@army.mil. Complete written responses to this RFI addressing the General Requirement capabilities are to be submitted to the above referenced e-mail address no later than March 26, 2026 @ 12:00 PM EST. --
Respondents should include the following business information with the Sources Sought response:Company name; Company address; Point of Contact; Telephone Number; E-mail address; Company Cage Code/UEI: Primary NAICS; Business Size; Current Registration in SAM; Web address.
DISCLAIMER “THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A “REQUEST FOR PROPOSAL (RFP)” TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMMATION PERTAINING TO THIS REQUIREMENT.”
Files
| File | Type | Posted |
|---|---|---|
| RFI High Speed Stamping for BLDC Stator Lamination.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity