High Integrity Coatings for Aircraft Landing Skis/Skids

Closed Solicitation Posted

Solicitation number
AF103-256
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic AF103-256

Component: USAF

Command: WR-ALC

Phase: SBIR Program Phase I Action

Technology Areas: Materials

Keywords: Skids; Skis; Hydrophobic Coatings

Objective:

Develop an ultra high-impact tolerant and hydrophobic coating for skis and skids of aircraft that operate in extreme conditions.

Description:

Landing skis and skids on both rotary and fixed-wing aircraft must withstand extreme operational and environmental conditions and maintain their structural integrity. Depending upon the aircraft Mission Design Series (MDS) and its mission, these conditions can include frequent high-impacts landings, sand/snow/dust abrasion, extreme cold or heat [2], and constant fluid contact (leading to fluid intrusion), among others. Often, these MDS’ are low volume-high demand in the Air Force inventory, so the loss of one airframe can severely impact a unit’s ability to meet their unique mission requirements. Therefore, recurring maintenance issues is unacceptable for these aircraft. Because ski/skid coating integrity is a known, recurring maintenance issue, a novel coating is needed to address this important shortfall.

While high-durability coatings are in use across the Air Force, none exist that meet this unique set of requirements. The goal of this project is to develop a low-friction, impact-resistant, abrasion-resistant, and hydrophobic coating that can be applied to aircraft landing skis and skids. The extreme cold endured by skis must be considered. Technology behind hydrophobic coatings could be employed to achieve low-friction and fluid-repellant properties. Desired properties should be retained as long as possible, so self-healing technologies could be considered, as could technologies that would make the coating simple and easy to repair. Similarly, failure-detection methods such as those employed in various "smart” coatings could be used.

Phase I:

Conduct basic research to develop a coating that meets the unique requirements of aircraft skis/skids as defined above. Standard characteristics for aircraft exterior coatings must also be met [3]. Present findings and potentially sample tests.

Phase II:

Produce samples of the coating according to approved development plan. Conduct tests according to approved test plan in a relevant environment. Basic capabilities according to desired characteristics must be demonstrated. Upon successful lab testing, an aircraft will be made available for limited flight testing. Create a report of test results and a production plan.

Phase III:

DUAL USE COMMERCIALIZATION: Military Application: All military aircraft with skis/skids would benefit from this coating technology. Research into very low friction water resistant skis would also have logical crossover into various marine areas. Commercial Application: Commercial aircraft and vehicles with skis/skids would benefit from this coating technology.

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors