Gull Wing Trucks
Closed Special Notice Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- SP330022Q5042
- Agency
- Distribution Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333924 Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
- PSC
- 2320 Trucks And Truck Tractors, Wheeled
- Place of performance
- Anniston, Alabama 36201, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Distribution published a Special Notice of intent to award a sole source contract for the procurement of six gull wing trucks. The agency requires these vehicles for its locations in Anniston, Alabama and Jacksonville, Florida.
The Special Notice provides interested contractors until September 12, 2022 to submit their qualifications and be considered as an alternative source for this requirement, though the agency intends to sole source award to Ledwell and Son Enterprises, Inc. if no other responsive sources are identified. The gull wing trucks specified include a 25-foot steel body with dual hydraulic cylinders for lifting, wireless remote controls, LED lighting, and a 60-inch toolbox. Eligible contractors must have fewer than 1,000 employees to qualify as a small business under the applicable size standard of NAICS code 333924.
Notice text
Six (6) 25' Gull Wing (Steel Over Wood) mounted on 2024 FTL M2 Auto_Air Ride with the following pertinent specifications:
Switch: Manual and remote
Truck Body: 25' Gull Wing Flatbed
Cylinders: Dual Hydraulic Cylinders with load check valves
Cylinders: Lift Gate style Power Unit
Hydraulic Controls: Wireless Remote for Hydraulic Controls
All steel construction
3" Steel cross members
6" Structural channel longitudinal members
5" x 3" x 1/4" angle Perimeter member
Solid Bulkheads with Aluminum end caps -- front & rear
4" x 6" Rectangular Tube -- Main roof support
Steel Tube frame work -- 1.5"
Internal drain system
Blind rivets -- aluminum to steel tube
Sealed Wiring Harness
Pins & Seals:Stainless Steel Pin Hinge
Doors Gull Wing: 8' Gull Wing -- Aluminum Skin .100"
Doors Gull Wing: Safety Support Arms
Tarp Type: Tarp on wing doors -- full length in center
Toolbox: 60" Toolbox
Recess Twelve (12") From Out-Side Rail - (Driver Side - Hydraulic Valve Bank & Curb Side)
Watertight compartment
Other: Gull Wing Demission Constraints - Inside Clearance - Greater that 6' - Open Door Obstruction Maximum - 12' 7" - Two (2) Block Hinge Grease System - Grease Zert Location - Driver Side & Curb Side - Additional Cargo Support Brace Behind Each Gull Wing Section - Cargo Pressure Switches - Correlate with Transmission Operation - Restrict Mobile Operation when door is not in transport mode - Restrict Door operation when opposing door is in Load/Unload Position - Provide Dual Door Override for Maintenance purposes - LED Lights - Safety Ditch Light (Correlated with Turn Signals & Head Lamps) - Four (4) White LED Cargo Lights - In-Cab Tower - Secondary In-Cab Hydraulic Controls -Air over Hydraulics - Three (3) Position - Spring to Center - Cargo Lights - Toggle Switch - Wireless Remote - Toggle Switch - In-Cab Door Open Indication Light - Driver Side - Curb Side - Rear Mounted Wireless Remote Cradle - Correlate Audible Tone with Pressure Switch (when Brakes are Release and Cradle Charging is Disengaged) - Backup Camera w/ 4 Cameras and 1 4 input Screen (Split Screen, Rotation, or Relay Activation) - Load - Rear - Curb Side Front Fender - Driver Side Front Fender.
Attachments
| File | Type | Posted |
|---|---|---|
| Notice of Intent to Award a Sole Source Contract.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Gull Wing Trucks | Limited / Sole Source Justification | |
| Gull Wing Trucks | Award Notice | |
| Gull Wing Trucks | Special Notice |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity