Guam CBOC Handyman services 36C26123Q0296 Amendment 0001

Contractor shall provide all supplies, personnel, equipment, tools, materials, supervision, and other items or services necessary for the maintenance and repair of buildings and structures and related systems and equipment as defined in this scope.

1.2. Maintenance and repair services shall include but not be limited to the following: 

1.2.1:  Carpentry/Painting – touch-up painting, patching wall, painting, carpet replacement and flooring work.  20 hours.

1.2.2:  Plumbing – water heaters, sinks, toilets, urinals, faucets, showers, drinking fountains, and fire sprinkler head.  20 hours.

1.2.3:  Electrical – troubleshooting electrical outages such as dead circuits, data lines and analog lines.  Additional work is installing outlets, switches, circuit breaker, lighting fixtures, faceplates, receptacles, light bulbs, lamps, data lines (CAT 5 or CAT 6) and analog lines.  Note:  Contractor to install data port on wall and pull network cable to IT closet.  Contractor will not connect network cable to any patch panel.  20 hours.

1.2.4:  Heating, Ventilation and Air Conditioning – HVAC equipment, refrigeration equipment, blowers, compressors, motors, dampers, condensers, cooling coils, pumps, duct work, air filters, heating units, air handler units, motors, belts, greasing of bearing, cleaning of coils, checking pressures, clear all drain lines of debris, ensure drain are draining properly.  20 hours.

1.2.5:  Life Safety Equipment – technician shall perform maintenance on exit signs, emergency lights, service fire extinguisher, strobe lights, annunciator and pull station/code blue.  20 hours.

1.2.6:  Asbestos and mold – testing for both asbestos and mold.  Removal of asbestos and mold remediation as needed.  10 hours.

1.2.7:  Locksmith – rekey, replace door hardware, and unlock doors.  10 hours.

1.2.8:  Additional maintenance to include bi-annually pressure washing parking, sidewalk, building and entry signage.  20 hours.