Gloves, pigskin

Added: Oct 16, 2014 3:14 pm  

This item is procured in accordance with a United States Department of Agriculture, Forest Service specification.

These Specifications are located at:  http://www.fs.fed.us/t-d/programs/fire/specs.htm

  This item shall be third party certified as being in compliance with National Fire Protection Association (NFPA) Standard 1977, Protective Clothing and Equipment for Wildland Fire Fighting. Proof of this certification shall be presented at the time of award and with the First Article submission.

A prerequisite for NFPA 1977 certification includes ISO 9001 certification.

Known sources for NFPA 1977 certification include:

Underwriters Laboratory at http://www.UL.com

Safety Equipment Institute at http://www.seinet.org

 

An approved Certification Organization shall certify that the item meets the requirements of NFPA 1977.  The contractor shall provide all required materials, garments, and information to the Certification Organization to permit such certification. The cost of certification is the contractor's responsibility.

Any change to place of performance, design or materials may require recertification. Any changes after an item has been NFPA certified shall be presented to DLA Troop Support and the NFPA certification agency for evaluation.

 

Gloves, Brushed Pigskin

As of 9/1/11 NFPA Std 1977, 2011 edition is in effect.

FAMILY OF ITEMS:

8415-01-565-0618, NFES 1641, MEDIUM

8415-01-565-0620, NFES 1640, SMALL

8415-01-565-0623, NFES 1639, EXTRA-SMALL

8415-01-565-0624, NFES 1642, LARGE

8415-01-565-0625, NFES 1643, EXTRA-LARGE

 

POSSIBLE SOURCE:

Shelby Specialty Gloves

3035 Centre Oak Way, Suite 102

Germantown, TN 38138

Phone: 901-360-8928

Toll Free: 800-888-3598

Fax: 901-362-9127

Email:  TRagan@shelbyglove.com

 

GLOVES, BRUSHED PIGSKIN:  Gloves shall meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, edition in effect, with the following characteristics:

 

Shall be made of 3.0 to 3.5 oz. brushed pigskin.  Shall not contain PCP, salts or esters;  Anatomically designed;  Gunn cut, keystone double layer thumb crotch;  Double row stitching around inset thumb;  Elastic wrist shirring;  Bound hem;  Storage strap;  Lock-stitched 8-10 stitches per inch using spun kevlar thread minimum break strength 12 lbs.; Machine washable.

 

Color:  Any acceptable

 

Each pair of gloves shall consist of matching right and left gloves that measure within 1/4 inch of each other in length and width.

 

First Article Inspection:  The gloves shall be subject to First Article Inspection.  The gloves will be examined for compliance to NFPA 1977 requirements and the requirements of this IPD.

 

(T0205)

 

ADDITIONAL INFORMATION FOR FED-STD-123:

.

NO ADDITIONAL INFORMATION FOLLOWS.

.

 

(T0303)

 

MIL-STD-129 CURRENT REVISION UNLESS OTHERWISE SPECIFIED

        - DEPARTMENT OF DEFENSE STANDARD PRACTICE

,,,,,, - MILITARY MARKING FOR SHIPMENT AND STORAGE

,,,,,,

 

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

 

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

 

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN.  NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS; THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

 

 

PACKAGING SHALL BE IN ACCORDANCE WITH ASTM D 3951.

BULK PACKAGING PROHIBITED. MIL-STD-147 APPLY.

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. DELETE ALL REFERENCES TO

"MIL-STD-123" AND REPLACE WITH "MIL-STD-129".

 

PACKAGING: Each pair of gloves shall be in a poly-bag with a label with the size and NSN number on the bag.  One dozen (12) pairs of gloves are put into the inner carton that is also marked with the size, NSN number, and NFES number inside the case.

 

PACKING:  Six (6) dozen pairs of gloves are in a full case.  If the order is for less than a carton, no sizes will be mixed.  The gloves shall be packed in a close-fitting corrugated fiberboard box, minimum burst strength 275 psi (maximum edge crush strength 32 lb per inch width), and shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification.

 

SPECIAL MARKING: The National Fire Equipment System (NFES) number appearing below the National Stock Number (NSN) of this Item Purchase Description shall be marked on the shipping container below the NSN.  The NFES number shall be preceded by "NFES".

Quantities requested: 8,525 PR in total as specified below:

8415-01-565-0618, NFES 1641, MEDIUM
SHELBY GROUP INTERNATIONAL, INC. 1HT35 P/N 5002FM
Quantity: 1,800 PR


8415-01-565-0620, NFES 1640, SMALL
SHELBY GROUP INTERNATIONAL, INC. 1HT35 P/N 5002FS
Quantity: 800 PR


8415-01-565-0623, NFES 1639, EXTRA-SMALL
SHELBY GROUP INTERNATIONAL, INC. 1HT35 P/N 5002FXS
Quantity: 125 PR


8415-01-565-0624, NFES 1642, LARGE
SHELBY GROUP INTERNATIONAL, INC. 1HT35 P/N 5002FL
Quantity: 3,500 PR


8415-01-565-0625, NFES 1643, EXTRA-LARGE
SHELBY GROUP INTERNATIONAL, INC. 1HT35 P/N 5002FXL
Quantity: 2,300 PR