Glass Media Blasting Cabinet System

 

Specifications

 

The Glass Media Blasting Cabinet System must include the following.

 

•A.     The Glass Media Blasting Cabinet System must include the following standard features:

 

•1.      Electrical Power:  voltage 460 volts, 3 phase, 60 hz

 

•2.      Two 48" deep x 74" wide x 36" high,  #14 gauge cabinets

 

•3.      Two 20" ISD pipe vestibules located in the swing doors of the cabinets, 8" deep with rubber gaskets on both the inner and outer entrances of the vestibules

 

•4.      Upgraded swing door hinges to allow for added weight of the vestibules.

 

•5.      Dual cabinet package to include two dimensionally correct cabinets bolted together with rubber curtain separator. Cabinet filler for each includes:

 

•·         Raise the height of the gloves and window by 12 "

•·         Operator's platform

•·         Top entry blast hose assembly

•·         Oval glove holes (4 sets)

•·         Two sets windows and glove holes (located in the front of the cabinets)

•·         Two 41" deep x 44 " high swing doors with electric door interlocks

•·         Two 900 CFM externally tunable declaimers

•·         Two CDC-9 Dust collectors, cartridge, with manual pulse jet cleaning of the filters

 

 

•6.      Flat cart with outside platform includes:

 

•·         24" Wide x 50 " Long flat cart with perforated steel top, manual in/out

•·         96" long outside platform located on the left side of the cabinet with removable track section for swing door clearance

•·         96" long outside platform located on the right side of the cabinet with removable tack section for swing door clearance.

 

•7.      36" Rolling manual turntable assembly:

 

•·         36" diameter perforated steel top 3/126' thick

•·         1000 lb. capacity (6" off center loading)

•·         Special sealed bearings, H.D. construction

•·         Manual rotation

 

 

•8.      Pressure blast system: Two one cubic foot pressure vessels with 1" pipe strings and 3/16" di-carb operators.

 

•9.      Separate controls, blast systems, reclaimers, and dust collectors for independent use by two operators.

 

•10.  The on/off blast of the cabinets is controlled by two electric foot treadles, one located in front of each cabinet.

 

•11.  Two rubber curtains for the interior walls and doors (black)

 

•12.  Two rubber curtains for the cone (black)

 

•13.  Two front wall rubber curtain (black)

 

•14.  Two boron carbide exhaust valve restrictors

 

•15.  Two heavy duty 6" conveying hose upgrades

 

•16.  Two reclaimer inlet wear plates, externally replaceable, 900-1200 CFM

 

•17.  Two 900 CFM Dust Collector Silencer with Damper for CDC-9

 

•18.  Two photophilic/timer upgrade for CDC collector, automatically pulses cartridges as required

 

•19.  Two HEPA filters located after the primary filter/bags on the dust collector

 

•20.  Two Sight plugs for 1 cubic foot pots

 

•21.  Provide delivery, on-site start-up services, installation, and training to be provided by certified technicians

 

•22.  Warranty - One (1) year warranty