General hardware kit

SYNOPSIS:

The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract as Brand Name Specific with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial item prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.  

The Contract Line Item (CLIN) is as follows: 

CLIN 0001 QTY 1/EA

MATERIAL:PRESSURE TRANSMITTER

DESCRIPTION:

Perform S/A 9713K IAW RPSM O-1691-A on #1ASW BCS

TRANSMITTER, PRESS DP V-CONE, 200' WC

P/N: W2T850979

CLIN 0002 QTY 1/EA

MATERIAL:GENERAL HARDWARE KIT

DESCRIPTION:

GENERAL HARDWARE KIT

P/N: W3T519702

CLIN 0003 QTY 1/EA

MATERIAL:GROMMET

DESCRIPTION:
GROMMET, GMT1309, 50A NBR, 1" LIP

P/N: W2T852188

CLIN 0004 QTY 1/EA

MATERIAL:1/2" PIPE PLUG

DESCRIPTION:
PLUG, PIPE, 0.50" NPT, 3000PSI

P/N: W2T881747

CLIN 0005 QTY 1/EA

MATERIAL:SPACER 0.019" THICK

DESCRIPTION:
SPACE, 0.019" THICK, 316 S, ASW

P/N: W3T408849

CLIN 0006 QTY 1/EA

MATERIAL:SPACER 1.5" THICK

DESCRIPTION:
SPACER, 1.5" THICK, 316 SS

P/N: W3T408852

CLIN 0007 QTY 1/EA

MATERIAL:BRACKET

DESCRIPTION:

BRACKET, VLV MNT, ASW ECG

P/N: W3T17788

CLIN 0008 QTY 1/EA

MATERIAL:NAME PLATE

DESCRIPTION:
CVN 78 NAME PLATE RETRO FIT KIT

P/N: W3T477292

CLIN 0009 QTY 1/EA

MATERIAL:HALF COUPLING .50"

DESCRIPTION:
HALF COUPLING, 3000#, .50"

P/N: W2T127888

CLIN 0010 QTY 2 /EA

MATERIAL:NUT .25 TI

DESCRIPTION:

NUT, .25 TI

P/N: W2T1896029

CLIN 0011 QTY 2/EA

MATERIAL:FERRULE 0.25" TI
DESCRIPTION:
FERRULE, 0.25" TI FRONT

P/N: W2T896031

CLIN 0012 QTY 2/EA

MATERIAL:FERRULE 0.25" TI BAC

DESCRIPTION:

FERRULE 0.25" TI BACK

P/N: W2T896032

CLIN 0013 QTY 1/EA

MATERIAL:GENERAL HARDWARE KIT

DESCRIPTION:

GENERAL HARDWARE KIT

P/N: W3T519702

CLIN 0014 QTY 1/EA

MATERIAL:GROMMET

DESCRIPTION:

GROMMET, GMT1309, 50A NBR, 1" LIP

P/N: W2T852188

CLIN 0015 QTY 1/EA

MATERIAL:1/2" PIPE PLUG

DESCRIPTION:

PLUG, PIPE, 0.50" NPT, 3000PSI

P/N: W2T881747

CLIN 0016 QTY 1/EA

MATERIAL:PRESSURE TRANSMITTER

DESCRIPTION:

TRANSMITTER, PRESS DP V-CONE, 200' WC

P/N: W2T850979

CLIN 0017 QTY 1/EA

MATERIAL:SPACER 0.019" THICK

DESCRIPTION:

SPACE, 0.019" THICK, 316 S, ASW

P/N: W3T408849

CLIN 0018 QTY 1/EA

MATERIAL:

DESCRIPTION:
SPACER, 1.5" THICK, 316 SS

P/N: W3T408852

CLIN 0019 QTY 1/EA

MATERIAL:

DESCRIPTION:

BRACKET, VLV MNT, ASW ECG

P/N: W3T17788

CLIN 0020 QTY 1/EA

MATERIAL: NAME PLATE

DESCRIPTION:
CVN 78 NAME PLATE RETRO FIT KIT

P/N: W3T477292

CLIN 0021 QTY 1/EA

MATERIAL: HALF COUPLING .50"

DESCRIPTION:

HALF COUPLING, 3000#, .50"

P/N: W2T127888

CLIN 0022 QTY 2/EA

MATERIAL: NUT .25 TI

DESCRIPTION:

NUT, .25 TI

P/N: W2T1896029

CLIN 0023 QTY 2/EA

MATERIAL: FERRULE 0.25" Tl

DESCRIPTION:

FERRULE, 0.25" Tl FRONT

P/N: W2T896031

CLIN 0024 QTY 2/EA

MATERIAL: FERRULE 0.25" Tl BAC

DESCRIPTION:

FERRULE 0.25" Tl BACK

P/N: W2T896032

Source: 

EvoQUA Water Technologies. (6RDX4)
Colorado Springs CO. 80915
WATER SOLUTIONS
ROBERT WEDDLE
ROBERT.WEDDLE@EVOQUA.COM

The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 326122 Plastics Pipe and Pipe Fitting Manufacturing with a size standard of 500 employees. The Product Service Code is 4710. The solicitation document incorporates provisions and clauses in effect through FAC 2023-01 and DFARS Change Notice 10/28/2022. 

The anticipated delivery date for this acquisition is 01 OCT 2025. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE. 

Quotes will be due by 12:00 PM EST on 23 AUG 2024. Responses to the solicitation notice shall be emailed to the attention of Temecca Chapman as 

Temecca.chapman@dla.mil. Please make sure that the solicitation number (SPMYM124Q0175) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. 

Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register at on the interested vendor list under SPMYM124Q0175. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed. 

All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Temecca Chapman at Temecca.chapman@dla.mil.