Fuel Tank Replacement Caesar Creek Lake, Ohio

The contractor will furnish all personnel, equipment, supplies, and materials necessary to remove and dispose of four (4) existing stationary fuel holding tanks. At specified locations.  The Contractor shall leave any existing plumbing that will be specified within the statement of work.  The contractor will provide four (4) pumps with specified sizes, functions, and locations at Caesar Creek Lake.

******************************Amendment 0001**************************

******************************AMENDMENT 0002***********************

Solicitation number W912QR21Q0095 for the Storage Tank Replacement at Caesar Creek Lake in Waynesville, Ohio is hereby amended as follow s:
a. Corrected location to Caesar Creek Lake in Block 10 of solicitation.
b. All other terms and conditions remain unchanged.
c. This amendment is effective the date of the Contracting Officer’s signature.

******************************Amendment 0001**************************

Solicitation number W912QR21Q0095 for the Storage Tank Replacement at Caesar Creek Lake in Waynesville, Ohio is hereby amended as follows:

a. Solicitation date has been extended from 24 September 2021 10:00AM Eastern Time to 27 September 2021
10:00AM Eastern Time.
b. The following Statement of Work sections have been revised:
Section 0001:
f) Drawings for existing tank are being provided.
g) Any damage to US Army Corps of Engineer property shall be fixed or replaced at no additional
cost to the Government.
h) All work must be completed with contractors equipment.
NOTE: All tanks will be emptied one week prior to removal. Approximate weighs of tanks are as
follows.
• 1000 Gallon 18K LBS
• 500 Gallon 12K LBS
• 250 Gallon 7.5K LBS
• Tank at Tower 600 LBS
• Pictures of existing tank have been provided with this package
Section 0002:
f) New tanks may be stored inside of Maintenance compound while the old tanks are removed.
g) All transfer pumps shall have a minimum flow of 10 GPM and not to exceed 25 GPM and shall be
approved by TPOC. All return pumps must meet industry standards to pump excess fuel at a rate not to
overflow the tank.
c. Update of Section 34. Index of Exhibits: Exsisting tank specification drawings added to Exhibit E

Exhibits Description
Exhibit A Site Map – attached via PDF
Exhibit B Miscellaneous Sample Forms – attached via PDF
Exhibit C Sample Quality Control Plan
Exhibit D Accident Prevention Plan Outline
Exhibit E Project Drawings and Photos – attached via PDF

******************************AMENDMENT 0002***********************