Four Handy Flats Barges
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W912ES20Q0022
- Agency
- ENDIST St Paul US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- PSC
- 1930 Barges And Lighters, Cargo
- Place of performance
- Fountain City WI 54629 USA
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers, St. Paul District is seeking a contractor to fabricate and deliver four handy flats/material barges to meet requirements for dimensions, capacity, and features. The solicitation specifies barge lengths of 50 feet, widths of 16 feet, depths of 4 feet, minimum hull and deck thickness, bulkhead and loading specifications, and that one barge have spud wells while two have stake pockets and loading ramps. Quotes must include digital drawings and are due by September 18, 2020, with selection based on technical acceptability of the quote and delivery to be completed within six months of award.
This opportunity is set aside for small businesses under NAICS code 336611 for ship building and repairing with a size standard of 1,500 employees. The contractor must deliver all four barges to Fountain City, Wisconsin within six months of award. Key details include barges transporting a minimum of 75,000 pounds with 750 pounds per square foot deck loading capacity.
Notice text
3 versions
Update #3 · Latest ·
The U.S. Army Corps of Engineers - St. Paul District is seeking a contractor to fabricate and deliver four (4) handy flats/material barges.
Requirements for ALL barges include:
- 50 feet in length
- Beam (width) of 16 feet
- Moulded depth of 4 feet
- Hull thickness not less than 1/4 inch.
- Deck thickness not less than 1/2 inch.
- Deck plate material shall be ASTM A572 grade 50 for improved wear resistance.
- Minimum of three (3) bulkhead sections allowing four (4) water-tight compartments.
- Minimum allowable deck loading of 750 lbs. per square foot (PSF)
- Each Barge shall provide flotation for at least 75,000 lbs.
- One barge shall have two (2) 7” x 7.5” spud wells. One at the port/bow corner and the other at the stern/starboard corner.
- Two barges shall have stake pockets along the port and starboard side to allow for the use of removable combing. These barges shall also include 120” x 24” loading ramps on one end. The ramps shall be designed to support a 15,000 lb. track loader.
- One barge shall be a flat deck barge.
Digital or hardcopy versions of the shop/concept drawings shall be provided as part of the offer.
The vendor will complete final delivery of all barges within six (6) months of award of the contract.
This solicitation is set aside for Small Businesses under NAICS code 336611, with an SBA size standard of 1,500 employees.
Quotes received without the shop/concept drawings will not be considered for award.
Quotes received after the date & time of solicitation close will not be considered for award.
OFFEROR SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections with the NAICS code applicable to the solicitation.
Amendment 0001 has been added to the solicitation. Amendment 1 makes changes to the SOW, adds a drawing for the Flat Barge Ramp, and revises the drawings of the Material Barges and Spud Barge (marked REV A).
Amendment 0002 has been added to the solicitation. Amendment 2 extends the solicitation close by two days, to 11:00 AM (CDT) on 18 September 2020.
Update #2 ·
The U.S. Army Corps of Engineers - St. Paul District is seeking a contractor to fabricate and deliver four (4) handy flats/material barges.
Requirements for ALL barges include:
- 50 feet in length
- Beam (width) of 16 feet
- Moulded depth of 4 feet
- Hull thickness not less than 1/4 inch.
- Deck thickness not less than 1/2 inch.
- Deck plate material shall be ASTM A572 grade 50 for improved wear resistance.
- Minimum of three (3) bulkhead sections allowing four (4) water-tight compartments.
- Minimum allowable deck loading of 750 lbs. per square foot (PSF)
- Each Barge shall provide flotation for at least 75,000 lbs.
- One barge shall have two (2) 7” x 7.5” spud wells. One at the port/bow corner and the other at the stern/starboard corner.
- Two barges shall have stake pockets along the port and starboard side to allow for the use of removable combing. These barges shall also include 120” x 24” loading ramps on one end. The ramps shall be designed to support a 15,000 lb. track loader.
- One barge shall be a flat deck barge.
Digital or hardcopy versions of the shop/concept drawings shall be provided as part of the offer.
The vendor will complete final delivery of all barges within six (6) months of award of the contract.
This solicitation is set aside for Small Businesses under NAICS code 336611, with an SBA size standard of 1,500 employees.
Quotes received without the shop/concept drawings will not be considered for award.
Quotes received after the date & time of solicitation close will not be considered for award.
OFFEROR SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections with the NAICS code applicable to the solicitation.
Amendment 0001 has been added to the solicitation. Amendment 1 makes changes to the SOW, adds a drawing for the Flat Barge Ramp, and revises the drawings of the Material Barges and Spud Barge (marked REV A).
Update #1 ·
The U.S. Army Corps of Engineers - St. Paul District is seeking a contractor to fabricate and deliver four (4) handy flats/material barges.
Requirements for ALL barges include:
- 50 feet in length
- Beam (width) of 16 feet
- Moulded depth of 4 feet
- Hull thickness not less than 1/4 inch.
- Deck thickness not less than 1/2 inch.
- Deck plate material shall be ASTM A572 grade 50 for improved wear resistance.
- Minimum of three (3) bulkhead sections allowing four (4) water-tight compartments.
- Minimum allowable deck loading of 750 lbs. per square foot (PSF)
- Each Barge shall provide flotation for at least 75,000 lbs.
- One barge shall have two (2) 7” x 7.5” spud wells. One at the port/bow corner and the other at the stern/starboard corner.
- Two barges shall have stake pockets along the port and starboard side to allow for the use of removable combing. These barges shall also include 120” x 24” loading ramps on one end. The ramps shall be designed to support a 15,000 lb. track loader.
- One barge shall be a flat deck barge.
Digital or hardcopy versions of the shop/concept drawings shall be provided as part of the offer.
The vendor will complete final delivery of all barges within six (6) months of award of the contract.
This solicitation is set aside for Small Businesses under NAICS code 336611, with an SBA size standard of 1,500 employees.
Quotes received without the shop/concept drawings will not be considered for award.
Quotes received after the date & time of solicitation close will not be considered for award.
OFFEROR SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections with the NAICS code applicable to the solicitation.
Attachments
| File | Type | Posted |
|---|---|---|
| W912ES20Q0022 Amendment 2.pdf | ||
| Handy Flat Spud Barge 16x50 REV A.pdf | ||
| W912ES20Q0022-0001 Amendment 1.pdf | ||
| Handy Flat Barge Ramp.pdf | ||
| Handy Flat Material Barge 16x50 REV A.pdf | ||
| MR Handy Flat Material Barge 16x50.pdf | ||
| W912ES20Q0022 RFQ for Barges.pdf | ||
| MR Handy Flat Spud Barge 16x50.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Four Handy Flats Barges | Award Notice | |
| Four Handy Flats Barges | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity