Forging, hollow preform, alloy steel, per drawing #12529564 Rev H

11-04-2019 Amendment 0001 is issued to revise the 12529564 Rev H drawing to REVISION J.  The drawings/prints/TDP are also updated.  The solicitation closing date/time has been extended to 2:30pm EST on December 3, 2019.


***Important Notice to All Interested Parties: An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive all technical data, see below***

Forging, hollow preform, alloy steel, per drawing #12529564 Rev H; For 120MM M256 cannon.

First Article Testing is required.

Quantity: 695 each plus an option quantity of 695 each.



Approximate dimensions: 381MM O.D X 121.9MM I.D. X 3290MM length.

Delivery point: F.O.B. DESTINATION.

SAM Notice: In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications.

Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on the Federal Business Opportunities (FBO) website at https://www.fbo.gov and will be listed under Army Contracting Command ACC-Warren (ACC-WRN) (WVA). CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.

Technical Data Package (TDP) - Instructions will be available in the solicitation on how to access the associated technical data package.

Critical Military Technology Data: The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.logisticsinformationservice.dla.mil. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.

***Important Notice to All Interested Parties: An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive all technical data, see below***

Forging, hollow preform, alloy steel, per drawing #12529564 Rev H; For 120MM M256 cannon.

First Article Testing is required.

Quantity: 695 each plus an option quantity of 695 each.



Approximate dimensions: 381MM O.D X 121.9MM I.D. X 3290MM length.

Delivery point: F.O.B. DESTINATION.

SAM Notice: In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications.

Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on the Federal Business Opportunities (FBO) website at https://www.fbo.gov and will be listed under Army Contracting Command ACC-Warren (ACC-WRN) (WVA). CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.

Technical Data Package (TDP) - Instructions will be available in the solicitation on how to access the associated technical data package.

Critical Military Technology Data: The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.logisticsinformationservice.dla.mil. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.

***Important Notice to All Interested Parties: This is a pre-solicitation notice. Further information and technical data will NOT be made available until the solicitation is released to the public, on or around the ESTIMATED date listed below. An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive all technical data***

Forging, hollow preform, alloy steel, per drawing #12529564 Rev H; For 120MM M256 cannon.

First Article Testing is required.

Quantity: 240 each plus an option quantity of 240 each.

Approximate dimensions: 381MM O.D X 121.9MM I.D. X 3290MM length.

Delivery point: F.O.B. DESTINATION.

******ESTIMATED date of solicitation issuance: April 5, 2019******

SAM Notice: In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications.

Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on the Federal Business Opportunities (FBO) website at https://www.fbo.gov and will be listed under Army Contracting Command ACC-Warren (ACC-WRN) (WVA). CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.

Technical Data Package (TDP) - Instructions will be available in the solicitation on how to access the associated technical data package.

Critical Military Technology Data: The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.logisticsinformationservice.dla.mil. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.