Flight Simulator Facility, Patrick Air Force Base, Florida

Notice of Intent to Sole Source

Special Notice: The U.S. Army Corps of Engineers Louisville District (USACE) will be soliciting proposals for the construction of a Personnel Recovery HC-130J Flight Simulator, Patrick Air Force Base, Florida. As part of the construction contract solicitation, USACE intends to include the following sole source requirements:

Mechanical – Best Coremax – with 1CX7X39Z-2-626 for combinated cores or 1CX7X39Z-l -626 for uncombinated cores; 1AX1X39Z-2-KS717-KS699 for the keys to combinated cores; and 1AX1X39Z-l -KS717-KS699 for the keys to uncombinated cores are the standard security requirements by the base.

Mechanical – Trane – this manufacturer is required as they are the base standard for chiller systems. 

Fire Protection – Monaco Fire Alarm Panel – Monaco MAAP-X – Fire alarm control panel and transceiver both manufactured by Monaco are required to interface with the Monaco receiving station at the Fire Department.

Building Level Network Controller – Schneider / SXWASPXXX1000 building level network controller.

Furniture Fixtures & Equipment (FF&E) - Basis of Design - The following manufactures were used for the Government's basis of design, but equal products can be used: Howard Miller, Alle, Magnuson Group, Herman Miller, Sit-on-It, Enwork, and Uline.

HVAC – Basis of Design – The following manufactures were used for the Government's basis of design, but equal products can be used: Evapco, Lochinvar, Bell and Gosset, Puroflux, Neptune, Daikin, Stulz, Kreuger, Price, and Greenheck.

Plumbing – Basis of Design - The following manufactures were used for the Government's basis of design, but equal products can be used: Guardian, Zurn, Elkay, QuickDrain, Woodford, Kohler, Stern-Willians, Sloan, Bauer, Watts, and A.O. Smith.

Architectural – Basis of Design - The following manufactures were used for the Government's basis of design, but equal products can be used: Wagner Companies, Soprema, Boral, International Fireproof Technology Inc, Mitsubishi Plastics Composites America, Greenheck, Kawneer, Viracon, Hufcor, STI, J. Herbert Corporation, and Shawbox.

All responsible sources may submit a capability statement which shall be considered by the agency. The submission must be received no later than 1:00 PM Eastern Time on 22 October 2021 to Levi.R.Speth@usace.army.mil

THIS IS NOT A REQUEST FOR PROPOSAL