Flange Ball Bearing Auxiliary Power Unit Puller
Closed Pre-Solicitation Posted
A newer pre-solicitation was posted. See the latest pre-solicitation from .
- Solicitation number
- N6833524RFI0001
- Agency
- Naval Air Warfare Center Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332216 Saw Blade and Handtool Manufacturing
- PSC
- 5120 Hand Tools, Nonedged, Nonpowered
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Air Systems Command, Naval Air Warfare Center, Aircraft Division, Lakehurst is seeking information from industry regarding a Flange Ball Bearing Auxiliary Power Unit Puller. The puller must be able to install and disassemble the thrust ball bearing in the V-22 aircraft air inlet housing assembly, both ashore and afloat. Respondents should describe their puller design, critical requirements, concept of operations, and environmental testing methods. Responses are due by November 7th and shall not exceed 5 pages excluding any operations manuals.
There is no set-aside designated for this pre-solicitation notice. The anticipated NAICS code is 333912 and PSC code is J019. No incumbent or current contractors were named. As this is a request for information only, no award values or quantities were provided. The puller will be used to service V-22 aircraft ball bearings as part of auxiliary power unit maintenance operations.
Notice text
2 versions
Update #2 · Latest ·
*** Edited with confirmed PSC as 5120 and extended 7 days from reposted date for responses.
PURSUANT TO FAR 15.201(e) - THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. Further, the Government is not at this time seeking proposals and will not accept unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. Proprietary information will be safeguarded in accordance with the applicable Government regulations. Failure to respond to this RFI does not preclude participation in any future associated RFP that may be issued.
PURPOSE
Naval Air Systems Command (NAVAIR), Naval Air Warfare Center, Aircraft Division, Lakehurst NJ (NAWCADLKE) is soliciting information and comments from industry on its ability to provide a Flange Ball Bearing Auxilary Power Unit (APU) Puller used Ashore and Afloat for V-22 aircraft.
DEFINITION / DESCRIPTION
The Flange Ball Bearing Puller should meet the requirement to install and/or disassemble the thrust ball bearing in the air inlet hoursing assembly. The Flange Ball Bearing APU Puller is used ashore and afloat, it is needed to raise the outer race of the flanged ball bearing in the air inlet housing assembly so all the bearing balls can drop into place during installation. Also, a mechanical puller is needed to pull the flanged outer race of the ball bearing from air inlet housing assembly during disassembly.
NAWCADLKE is seeking information for industry regarding Flange Ball Bearing APU Puller. Please provide the following information about Flange Ball Bearing APU Puller.
1. General description of your Flange Ball Bearing APU Puller
2. Identification of critical requirements for the Flange Ball Bearing APU Puller
3. Overview of your Flange Ball Bearing APU Puller concept of operation
4. Discuss critical information required for the use of your Flange Ball Bearing APU Puller.
5. Describe environmental testing test methods
6. Provide any additional information you desire
GENERAL GUIDELINES
Your information package should not exceed 5 pages. Any operation manual provided shall not be counted against this page limit. Responses to this RFI should be submitted to Lakehurst Procurement via e-mail to theresa.a.mason15.civ@us.navy.mil no later than 8 business days from the date of this posting.
Responses to this RFI will not be returned. Respondents will not be notified of the result of the review. If a solicitation is released, it may be synopsized on the SAM.gov. It is the potential vendor’s responsibility to monitor this site for the release of any follow-on information.
Update #1 ·
PURSUANT TO FAR 15.201(e) - THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. Further, the Government is not at this time seeking proposals and will not accept unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. Proprietary information will be safeguarded in accordance with the applicable Government regulations. Failure to respond to this RFI does not preclude participation in any future associated RFP that may be issued.
PURPOSE
Naval Air Systems Command (NAVAIR), Naval Air Warfare Center, Aircraft Division, Lakehurst NJ (NAWCADLKE) is soliciting information and comments from industry on its ability to provide a Flange Ball Bearing Auxilary Power Unit (APU) Puller used Ashore and Afloat for V-22 aircraft.
DEFINITION / DESCRIPTION
The Flange Ball Bearing Puller should meet the requirement to install and/or disassemble the thrust ball bearing in the air inlet hoursing assembly. The Flange Ball Bearing APU Puller is used ashore and afloat, it is needed to raise the outer race of the flanged ball bearing in the air inlet housing assembly so all the bearing balls can drop into place during installation. Also, a mechanical puller is needed to pull the flanged outer race of the ball bearing from air inlet housing assembly during disassembly.
NAWCADLKE is seeking information for industry regarding Flange Ball Bearing APU Puller. Please provide the following information about Flange Ball Bearing APU Puller.
1. General description of your Flange Ball Bearing APU Puller
2. Identification of critical requirements for the Flange Ball Bearing APU Puller
3. Overview of your Flange Ball Bearing APU Puller concept of operation
4. Discuss critical information required for the use of your Flange Ball Bearing APU Puller.
5. Describe environmental testing test methods
6. Provide any additional information you desire
GENERAL GUIDELINES
Your information package should not exceed 5 pages. Any operation manual provided shall not be counted against this page limit. Responses to this RFI should be submitted to Lakehurst Procurement via e-mail to theresa.a.mason15.civ@us.navy.mil no later than 8 business days from the date of this posting.
Responses to this RFI will not be returned. Respondents will not be notified of the result of the review. If a solicitation is released, it may be synopsized on the SAM.gov. It is the potential vendor’s responsibility to monitor this site for the release of any follow-on information.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Flange Ball Bearing Auxiliary Power Unit Puller | Pre-Solicitation | |
| Flange Ball Bearing Auxiliary Power Unit Puller | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity