Fender, Marine
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- 52600PR250000065
- Agency
-
Coast Guard
Department of Homeland Security
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332510 Hardware Manufacturing
- Place of performance
- Curtis Bay, Maryland 21226, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard Surface Acquisition Logistic Center (SALC) is seeking to procure 16 marine fenders through a competitive solicitation process. The solicitation, identified by number 52600PR250000065, is for 2-foot diameter by 4-foot length standard capacity foam-filled netless fenders that meet PIANC guidelines and US Coast Guard/Navy specifications. These fenders will be constructed with thick, tough filament nylon-reinforced non-marking urethane skin and heat-laminated closed cell energy-absorbing foam. The procurement will follow FAR 13 Simplified Acquisition Procedures and will be awarded on a Lowest Priced Technically Acceptable basis. Quotes must be submitted electronically to Nigel McIntyre at nigel.a.mcintyre@uscg.mil by February 15, 2025, with the solicitation number in the email subject line.
The solicitation has no specific set-aside designation, meaning all responsible sources may submit quotes. The fenders must be delivered to the USCG SALC CTD located at 700 Ordnance Road in Baltimore, Maryland 21226. The contract will be a Firm Fixed Price Purchase Order with no down payments or advanced payments permitted, and the vendor must secure funding until delivery and acceptance by the US Coast Guard. Payment will be made via government purchase order with Net 30 terms, and partial payment submissions are allowed with the Contracting Officer's approval. The fenders will include integral swivel end fittings internally connected with a heavy-duty stud-link chain, and the procurement falls under the Hardware Manufacturing NAICS category (332510). The place of performance is Curtis Bay, Baltimore, Maryland.
Notice text
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR and as supplemented with additional information included in this notice. This announcement constitutes only solicitation; quotes are being requested and a separate written solicitation will not be issued.
Solicitation number 52600PR250000065 applies and is used as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016. It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency.
The U.S. Coast Guard, Surface Acquisition Logistic Center (SALC) intends to award a Firm Fixed Price Purchase Order. No down payments or advanced payments will be made to the awarded vendor. Vendor shall ensure they can secure funding for this order until delivered and received by the US Coast Guard. Payment will be made by Government Purchase order (Net 30) and the vendor shall assume financial responsibility until the order is accepted and received by US Coast Guard. Payment of the work is authorized to be submitted as work is completed but must be approved by the Contracting Officer First.
Basis for Award: This solicitation is based on FAR 13 – Simplified Acquisition Procedures and quotes will be reviewed and awarded on a Lowest Priced Technically Acceptable basis per the solicitation. Past performance will only be reviewed for “responsibility” basis per FAR 9.1. There are no adjectival ratings nor will award be based on a best value tradeoff basis. All quote’s will be evaluated for who meets all the technical requirements, next who meets our deadlines and finally what is the lowest cost.
All quotes shall be emailed to Nigel McIntyre via nigel.a.mcintyre@uscg.mil All emailed quotes shall have 52600PR250000065 in the subject of the email.
Item is 2 Feet (ft) Diameter x 4 Feet (ft) Length Standard Capacity Foam Filled netless Fender QTY:16, Fenders meet the below standards
- Tested in accordance with PIANC guidelines.
- Constructed to US Coast Guard/ Navy specifications.
- Thick, tough filament nylon reinforced non-marking urethane skin
- Heat laminated closed cell energy absorbing foam care.
- Integral swivel end fittings internally connected with a heavy duty stud-link chain
Most be delivered to:
USCG SALC CTD
700 Ordanance Rd
Baltimore, MD 21226
SKC Nigel McIntyre
Notice history
| Notice | Type | Posted |
|---|---|---|
| Fender, Marine | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Fender, vehicular | Land and Maritime | Total Small Business | |
| Parts kit seal replacement | Coast Guard | No set-aside | |
| FM 200 | Coast Guard | Total Small Business | |
| Brace, fender | Land and Maritime | Total Small Business | |
| Appleton cylinder | Coast Guard | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity