F16_AN_APG68_Radar_Dual_Transmitter_NSN5998012031936_PN77R025G01

Open Pre-Solicitation Posted

Solicitation number
F16_AN_APG68_Radar_Dual_Transmitter_NSN5998012031936_PN77R025G01
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

NAICS code
Not on record
PSC
Not on record
Place of performance
Tinker AFB, Oklahoma 73145, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Department of the Air Force Materiel Command Air Force Sustainment Center is seeking qualified sources to repair RF Controller units (Part Number 772R025G01, NSN 5989-01-203-1936) used in F-16 C/D aircraft equipped with AN/APG-68 Radar Dual Mode Transmitters. Potential repair sources must meet comprehensive qualification requirements, including notification of intent to qualify, certification of adequate repair, inspection, testing, packaging, and storage facilities, and verification of a complete technical data package from Northrop Grumman. Offerors must demonstrate repair process compliance with government requirements and Unique Identification standards, submit quality and environmental evaluation data for approval, develop and execute a detailed qualification test plan at their own expense with at least 30 days' advance government notice, and provide a pre-contract award qualification article for form, fit, and function evaluation. The pre-solicitation notice was posted on January 20, 2026, with a due date of December 31, 2027, allowing prospective bidders ample time to prepare their qualification submissions and responses.

This opportunity is not designated as a set-aside and does not identify any current incumbents or specific award value or budget range in the available documentation. The estimated qualification cost for prospective offerors is $5,000, with an estimated qualification completion timeframe of 270 days. The government will notify offerors of qualification article test results within 90 days of submission, and while contract award will not be delayed to accommodate qualification completion, offerors cannot be denied contract consideration if they demonstrate the ability to meet all qualification standards before the award date. Source Qualification Waiver Criteria are available for sources with prior government supply history, prior assembly qualifications, earlier dash number experience, similar item production capability, or successor entity status with equivalent facilities and personnel, potentially reducing the burden of full qualification for eligible applicants.

Notice text

 REPAIR QUALIFICATION REQUIREMENTS
NSN: 5989-01-203-1936
P/N: 772R025G01
Noun: RF Controller
Application: F-16 C/D AN/APG-68 Radar Dual Mode Transmitter
13 Jun 2019 Section C 3/3
2. SOURCE QUALIFICATION WAIVER REQUIREMENTS
Sources who meet any of the following Source Qualification Waiver Criteria (QWC) may apply for a waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify production capability:
a. QWC1: The potential source submits written certification that the articles have been supplied to the government or original equipment manufacturer (e.g., DD Form 250, Material Inspection and Receiving Report, Purchase Order invoice, etc).
b. QWC2: NA
c. QWC3: A source qualified to provide an assembly is usually qualified to provide subassemblies, major components, and items of that assembly.
d. QWC4: A source qualified to provide earlier dash numbers of a basic P/N may be qualified to provide other dash numbers of that same basic P/N, provided there is no increase in complexity, criticality, or other relevant requirements.
e. QWC5: A source qualified to provide a similar or like item can be qualified to provide the required item. However, for approval, the engineering authority must verify that there is no increase in complexity, criticality, or other requirements over that of the similar item. At a minimum, the source shall provide a complete set of drawings for the similar item and written proof, such as purchase orders, shipping documents, etc., to show that the similar item was provided to the original equipment manufacturer or DoD.
f. QWC6: A source previously qualified to provide an item, but which has been purchased, sold, merged, absorbed, reformed, split, etc., may qualify if it can be established that the qualification is currently with the requester and that the requester has the same or equivalent facilities, tooling, equipment, personnel, and utilizes the original forging, castings, etc., in the repair process.
g. QWC7: NA

Files

File Type Posted
RQR 772R025G01 Section C.pdf PDF
RDL 012031936.pdf PDF

Similar open opportunities

Opportunity Agency Set-aside Responses due
F16_ANAPG_68_RadarDualModeTransmitterNSN5998013035872PN762R831G01 Tinker AFB, Oklahoma 73145, United States · NAICS 81121 Air Force Sustainment Center No set-aside
F16_APG68_RadarDualModeTransmitter_PN772R0225G01_NSN5598012031936 Tinker AFB, Oklahoma 73145, United States · NAICS 81121 Air Force Sustainment Center No set-aside
F16AN_APG68_RadarDualModeTransmitter_NSN5998014640421_PN_792R998G01 Tinker AFB, Oklahoma 73145, United States Air Force Sustainment Center No set-aside
F16_AN_APG_68_Radar_Transmitter_NSN5998012478169_PN_762R923G01 Tinker AFB, Oklahoma 73145, United States Air Force Sustainment Center No set-aside
F16AN_APG_68_Radar_NSN5998012885420_PN_762R656G01 Tinker AFB, Oklahoma 73145, United States Air Force Sustainment Center No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity