EUS Green Run Pressure Transducers

This is a Brand Name requirement. Static Pressure Transducers Brand Name: Stellar
RFQ# 80NSSC22794844Q
FOB Destination
Delivery Address:
NASA, John C. Stennis Space Center
Stennis Space Center, MS 39529
Statement of Work
EUS Green Run Transducers
The NASA, John C. Stennis Space Center (SSC) has been selected as the test site for
the Exploration Upper Stage (EUS) Green Run Test Project. This work is planned at Stennis Space
Center’s (SSC) B-2 Test Stand. The work to be performed under this project consists
of providing instrumentation to support EUS Green Run testing on the B-2 Test Stand.
The new instrumentation for the B-2 Test Stand will consist of Static Pressure Transducers.
1. Equipment shall be provided that meets NASA's requirements identified in the
attached specification.
NASA SSC shall issue a Firm Fixed Price Contract for the following:
a) Three (3) static pressure transducers brand Stellar, model GT200-25G-155,
with a minimum pressure range of 0 – 25 PSIG a response time of less than 125 mSecs as defined in
the 0 – 25 PSIG data sheet included in the Instrument Specification for Pressure Transducers,
140HF-GE01.
b) Six (6) static pressure transducers brand Stellar, model GT200-5G-155, with a minimum pressure range of 0 – 5 PSIG a response time of less than 125 mSecs as
defined in the 0 – 5 PSIG data sheet included in the Instrument Specification for Pressure
Transducers, 140HF-GE01.
2. The vendor shall provide a completed calibration test report, which shall include:
a) A description of the test configuration, including a figure depicting this configuration.
b) Test results, which indicate that the device meets the uncertainty requirements of
the specification.
3. NASA shall review the test data for adequacy and acceptability.
4. The vendor shall perform these tests at the vendor’s facility.
5. The vendor shall provide lead time for delivery for all transmitters:
6. The vendor shall propose a project schedule identify all tasks identified in this
Statement of Work.
7. The vendor shall identify standard terms for hardware maintenance.
8. The vendor shall provide documentation per the included specifications.
9. The vendor shall identify equipment compliance with section 508 of the Rehabilitation Act of
1973 (Ref 36 CFR 1194) and NASA Procurement Information Circular per the following web site:
http://www.hq.nasa.gov/office/procurement/regs/pic05-01.html.
10. The vendor shall identify equipment compliance with the Environmental Protection
Agency’s (EPAs) comprehensive guideline lists (CPGs) per the following web site:
http://epa.gov/epaoswer/non-hw/procure/products.htm.
11. The vendor is requested to provide cost and schedule proposals for providing nts
only that are fully compliant with the referenced NASA
pecifications (140HF-GE01).