ERB ShopSabre CNC Router - Supplies
Closed Special Notice Posted
- Solicitation number
- 80NSSC26940990Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332710 Machine Shops
- PSC
- 3419 Miscellaneous Machine Tools
- Place of performance
- United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center announced a sole-source procurement intent for ERB ShopSabre CNC Router supplies on August 26, 2026, with a capability statement deadline of August 30, 2026 at 12:00 p.m. Central Standard Time. The agency has determined that NUMERICALLY AUTOMATED CUTTING SYSTEMS, LLC DBA: SHOP SABRE (Lakeville, Minnesota) is the sole provider capable of delivering the specified equipment and will proceed under FAR 12.102(a) commercial authority unless competitive responses demonstrate otherwise.
Performance will occur at NASA Glenn Research Center. The procurement addresses rapid prototyping requirements for the Engineering Research Building, specifically a 60"x100"x12" ShopSabre PRO 408 CNC router system with 0.001" positional repeatability, AC servo drive motors, dual Y ball screws, and 4-zone vacuum clamping. The vendor provides lifetime support including in-person and online training as standard.
Interested organizations must submit written capability statements and qualifications only; oral communications and quotes are not acceptable and will not be evaluated. Submissions must reference the Notice ID in the subject line. The government reserves sole discretion to conduct competitive procurement based on capability submissions received. NAICS code 332710 applies. Laura Quave (Procurement Specialist II) is the primary point of contact at laura.a.quave@nasa.gov. NASA FAR Supplement Clause 1852.215-84 (Ombudsman) applies to this acquisition.
Notice text
VENDORS MUST REFERENCE THE NOTICE ID IF SUBMITTING A CAPBILITY STATEMENT IN THE SUBJUECT LINE.
Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team.
Synopsis:
NASA/NSSC has a requirement for ERB ShopSabre CNC Router - Supplies
NASA/NSSC intends to issue a sole source contract to NUMERICALLY AUTOMATED CUTTING SYSTEMS, LLC DBA: SHOP SABRE 21673 Cedar AVE Lakeville, Minnesota 55044-9073 United States under the authority of FAR 12.102(a). It has been determined that NUMERICALLY AUTOMATED CUTTING SYSTEMS, LLC DBA: SHOP SABRE is the sole provider of ERB ShopSabre CNC Router - Supplies.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 332710.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12:00 p.m. Central Standard Time on 8/30/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .
Primary Point of Contact:
Laura Quave
Procurement Specialist II
laura.a.quave@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SATPC0042270 Tab 07 Capability Statement Template.pdf | ||
| SATPC0042270 Tab 04 4 Specifications.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| Stainless jack screw | Shared Services Center | No set-aside | |
| Universal Robotics UR30 Robot Workstation and Console | Shared Services Center | No set-aside | |
| Zygo Purchase | Shared Services Center | No set-aside | |
| RED Digital V-Raptor X customized cameras per NASA vibration specifications | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity