Enclosure to house laser cutter, necessary to utilize laser cutter for EV73
Closed Special Notice Posted
- Solicitation number
- 80NSSC25912776Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center has published a Special Notice seeking an enclosure to house a laser cutter necessary for the EV73 project. The agency intends to issue a sole source contract to Allied Modular Building Systems, Inc. of Orange, California, under FAR 13.106-1(b)(1)(i) authority, having determined this company is the sole provider of the required enclosure. The procurement will be conducted by NASA/NSSC with performance at NASA Marshall Space Flight Center in Alabama. The government plans to acquire commercial items and services using FAR Part 12 and FAR Part 13 provisions and procedures. This procurement falls under NAICS code 333517 for Machine Tool Manufacturing.
The enclosure is required to support human factors engineering assessments for NASA or a space act agreement partner as part of the EV73 laser cutter project. According to the Statement of Work, the enclosure must provide specific characteristics including a 16' x 16' x 10' enclosed volume, 4' x 10' door openings, complete visual obstruction when closed, pre-wired electrical interfaces, lighting fixtures, and capabilities for interlock and fire suppression systems. Interested organizations may submit written capabilities and qualifications to the identified point of contact by 12 p.m. Central Standard Time on August 18, 2025. These submissions will be evaluated solely to determine whether to conduct the procurement on a competitive basis, though the government retains discretion over the final competition decision. Oral communications are not acceptable responses to this notice.
Notice text
Synopsis:
NASA/NSSC has a requirement for Enclosure to house laser cutter, necessary to utilize laser cutter for EV73.
NASA/NSSC intends to issue a sole source contract to ALLIED MODULAR BUILDING SYSTEMS, INC. 642 W Nicolas AVE Orange, California 92868-1316 United States under the authority of FAR 13.106-1(b)(1)(i). It has been determined that ALLIED MODULAR BUILDING SYSTEMS, INC. is the sole provider of Enclosure to house laser cutter, necessary to utilize laser cutter for EV73.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 333517
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12 p.m. Central Standard Time on 8/18/2025. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Files
| File | Type | Posted |
|---|---|---|
| SATPC0039524 TAB 04 4 SOW.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| ComposiCAD Gold 4 axes | Shared Services Center | No set-aside | |
| High-precision X-ray beamline slits for integration into a custom-built X-ray reflectometer system | Shared Services Center | No set-aside | |
| Sealing Machines for CHOP Shop | Shared Services Center | 8(a) Sole Source | |
| Thorlabs Fiber SCALPSS 2 | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity